Knitted bolero for girls. Children's bolero with openwork edging with knitting needles. Pattern and description of crocheting a bolero for a girl

Small summer knitted bolero for girls with dropped sleeves and frill bottom edge, knitted from top to bottom in one piece. A simple but stylish model will be a good addition to an elegant dress.

Description given for size 2 (3, 4, 5, 6, 7, 8, 10); circle chest 53 (55, 58.5, 60, 63.5, 65.5, 68, 72) cm; length 23 (24, 24, 25.5, 26.5, 28, 29, 30.5) cm; the length of the lowered sleeve is 2 cm for all sizes.

For knitting you will need 170 (180, 200, 210, 230, 250, 280, 300) g of Brown Sheep Yarns Cotton Fleece (80% pima cotton, 20% merino wool, 196 m / 100 g); circular knitting needles 4 mm and 4.5 mm, length 60 and 80 cm; set of double needles 4 mm and 4.5 mm; markers and loop holders; two small buttons.

Size: for 3 years.

You will need: Nahih yarn (65% merino wool, 10% silk, 15% polyamide, 10% cashmere, 1500 m per 100 g) - 70 g thistle color, knitting needles No. 3, hook No. 1.9.

Openwork pattern: knit according to pattern 1, which shows the front and back rows.

Purl stitch: front rows- purl loops, purl rows - front loops.

Knitting density: openwork pattern - 27 loops per 37 rows correspond to 10 by 10 cm.

Attention! Knit with thread in 3 folds.

Blue bolero for girls knitted with short sleeves

Bolero sizes: 4, 6, 8, 10 years.

Knitted from 100% alpaca wool using knitting needles No. 3.5 and 4.

This beautiful bolero is knitted. The patterns of this bolero are based on various elastic bands. The description is for sizes from 4 to 10 years. This vest is perfect for warm spring and cold summer evenings.
Vest size 110 (122) 134 cm.

ORANGE KNOTTED BOLERO FOR A GIRL

Size: a) 2 years – b) 4 years – c) 6 years – e) 8 years – f) 10 years.

For 3 years
Knitting materials: Nahih yarn (65% merino wool, 10% silk, 15% polyamide, 10% cashmere, 1500 m/100 g) - 70 g thistle color, knitting needles No. 3 and hook No. 1.9.

Openwork pattern: knit according to pattern 1, which shows the faces. and out. rows.

Purl stitch: persons rows - purl. p., out. rows - persons. p.

Knitting density: openwork pattern - 27 stitches x 37 rows = 10 x 10 cm.

Attention! Knit with thread in 3 folds.

Center back: Cast on 25 sts on needles.

Distribute them as follows: edge, 3 p. satin stitch, 17 p. openwork pattern, 3 p. purl. iron, chrome Knit straight until the length of the central part is 27 cm = 10 repeats. Close the hinges.

Left side and sleeve: On the left edge of the central part, dial 69 sts. Distribute them as follows: chrome. p., 1 p. satin stitch, 65 p. openwork pattern, 1 p. purl. iron, chrome Knit straight 12 cm.

Right side and sleeve: knit symmetrically.

Assembly: sew the seams of the sleeves. Crochet the edges of the sleeves and the edge of the product in a circle with an openwork border according to pattern 2.

Enlarges when pressed

Turquoise bolero - cape

The children's cape is knitted in a fancy pattern using turquoise wool yarn. It takes very little time to knit such a cape, but you will wear it for several years.

Size: 6-9 months

You will need: 50 g turquoise wool, knitting needles No. 2, 1 m ribbon white 1 cm wide, 6 buttons.

Patterns

Pattern 1 - elastic 1 x 1

Pattern 2 - garter stitch$CUT$

Pattern 3 - knit a fantasy pattern according to the pattern

Pattern 4 - stockinette stitch

Pattern 5 - 1st and 3rd rows - knit. loops, 2nd row and all even rows - purl. loops, 5th row - 2 knit loops, * yarn over, 2 knit loops together, * yo, 3 knit loops, 7th and 9th rows - knit. loops.

Knitting density in pattern 3: 21 loops and 30 rows = 7 x 7 cm

Job description

Start with the neckline. To do this, cast on 103 stitches on the knitting needles and knit 12 rows with pattern 1, starting the 1st row from the faces. loops. Next knit as follows: 10 loops with pattern 2, then 83 loops with pattern 3, 10 loops with pattern 2. The first and last 10 loops are a placket that is knitted in garter stitch throughout the entire knitting. In the center of the last 10 loops of the placket, make 6 buttonholes: the 1st loop in the 7th row, the rest every 16 rows.

When knitting pattern 3, start according to the pattern. The 1st row of the pattern corresponds to the last row of the elastic. Knit the first motif up to arrow A (= 6 stitches), then knit the pattern between arrows A and B 8 times (= 64 loops) and finish from arrow B to the beginning of the bar (= 13 loops). At the beginning of the corners openwork knitting 2 loops are added: yarn over in the center of the motif, then add 1 loop from the broach (knitting it crossed). K1, then yarn over again. As a result, out of the added 3 loops, 2 loops remain due to the knitted broach. In the remaining rows of the motif, each added loop is knitted with a simple broach or 2 loops together. and does not create an increase.

The first additions are made in the 7th row and every 8th row when the motifs begin (according to the diagram). All openwork corners do not have the same side height, although they start every 8th row: the 1st corner consists of 6 rows, the 2nd corner - of 8 rows, the 3rd corner - of 10 rows. The last corner begins in the 71st row and is knitted completely openwork. With the beginning of this angle we have already added 180 loops (= 283 loops). Having knitted 94 rows according to the pattern, we divide the knitting into sleeves and a back with shelves.

Sleeves

To do this, leave the first 38 stitches on the auxiliary needle and knit. 1st sleeve on the next 77 loops, adding 1st loop at the beginning and end of the row (3 motifs were selected excluding edge loops). On these 79 loops, knit 10 rows with pattern 5. Cast off all loops. Transfer to secondary knitting needle 53 back loops and knit the second sleeve on the next 77 loops in the same way as the first, adding 1 loop on both sides. Sew the sleeves.

Torso

Transfer the loops of the first shelf, back and second shelf onto one knitting needle. Knit faces. row as follows: 38 knit stitches, knit 2 loops from the edge of the sleeves, 53 knit loops, knit 2 loops from the edge of the sleeves, 38 knit loops. (= 133 loops). Knit 10 rows on all these loops with pattern 2. Cast off the loops.

Assembly

Fold the sleeve strips along the fold line and sew them from the inside with a blind seam. Fold the neck of the tank in half and sew it with a hidden seam too. Pull the tape into the resulting hole in the neck. Sew buttons.

Excellent madel for a girl ages from 3 years to 10 years. At knitting this children's jacket Soft and delicate merino wool yarn was used.

Age, years: 3-4, 4-5, 6-7, 8-9, 9-10.

Measurements:

• Chest circumference: 78 (82, 86, 91, 96) cm.
• Length to shoulder: 28 (30, 31, 33, 35) cm.
• Sleeve length (with folded cuff): 22 (25, 28, 30, 36) cm.

Materials:

• 5 (6, 7, 7, 8) skeins of “Cashmerino aran” yarn from Debbie Bliss (50 g/90 m, 55% merino wool, 33% microfiber, 12% cashmere)
• Knitting needles 4.5 and 5 mm.
• Circular knitting needles 4.5 and 5 mm.

Work density:

18 p. and 24 r. = 10 cm stockinette stitch, needles 5 mm.

The bolero perfectly helps little fashionistas solve the issue of regularly changing looks and styles, because the same thing will look completely different in a duet with two different models bolero. Not to mention, these beautiful capes not only decorate, but also protect from the chill in the off-season.

Modern bolero models have long gone beyond their classic look: from the upper part of the Spanish national costume they were transformed into a purely female mandatory attribute of the wardrobe. Now the cuts of these jackets can vary: be elongated; similar to vests; have absolutely incredible patterns or be the very simplicity and ease.

The choice of bolero models for women and girls is large, but most of them can be created with your own hands if you find suitable patterns with descriptions of knitting or crocheting. In this article we will focus special attention crochet jackets for girls.

Pattern and description of crocheting a bolero for a girl

Crocheting a bolero is a pleasure, because there are a huge number of models of this product: for summer or winter; openwork or dense; short or long; with or without fasteners, sleeves, collars, yokes. These knitted jackets look good with most outfits - both casual and formal. And when combined with other products made in the same style, boleros on girls look very interesting and stylish.

A simple model for beginners

Let's start by creating a simple crocheted bolero for a girl - knitting for beginners will be accessible thanks to step-by-step photographs. This article will be useful for those who want to try their hand, but are not confident in their knowledge. Beginning knitters will be able to crochet a bolero for a girl if they use detailed master class With step by step photos work.

Popular articles:

Bolero size for girls:

for 5-6 years, height 116.

Materials for work:

• Pekhorka yarn “Children's cotton” (330 m/100 g) - 150 g;
• hook No. 2.5;
• satin ribbon in tone, 0.5 cm wide, about 2.5 - 3 meters.

You can use any yarn of the same thickness, but to get an insulated version of the bolero, it is better to take wool blend yarn.

Back knitting pattern:

Important: the final result of knitting a product may differ from that presented depending on the density of the knitting, the manufacturer of hooks and knitting needles, so it is important to compare your product not only with the attached description, but also with the size of the pattern.

Knitting back

We collect a chain of 82 air loops + 3 lifting air loops and knit according to the given pattern, starting with 1 air loop. The first row consists of alternating double crochets (DC) with chain loops (VP). It should be 34 cm long. We knit the second row according to the pattern: 4 chain loops, 5 double crochets. Work 2 chain stitches of the pattern and knit 4 stitches of the bottom row (skip 1 double crochet, see bottom row) 3 double crochets in one loop.

Perform 2 chain stitches of the pattern again. The first report of the pattern is completed. Next are 5 “intermediate” columns. Let's look at the diagram. We knit the third row according to the pattern, with 3 stitches knitted in one loop now knitted together. It turns out to be a “diamond”. We knit a row of double crochets/1 chain stitch.

In the next row we shift the pattern by half of the report in a checkerboard pattern (see pattern diagram). Then we knit the 6th row of “diamonds”. Next, we knit the pattern according to the pattern until we reach a back height of 8 cm (at the same time, we control the width of the product 34 cm: we lay out the product a little stretched so that the width is 34 cm, then measure the height). You can close the loops for the armhole simply by applying the product to a life-size drawn pattern, or you can do it according to the attached diagram.

Next, three loops are knitted to close the armhole. We make 3 lifting chain stitches, replacing the first double crochet in the diamond pattern. Then you need to knit according to the pattern. Without knitting 3 loops to the end of the pattern, we knit 2 double crochets in a row at the end of the row. In the next row you need to close one loop on each side. To do this, 3 air loops are knitted and immediately after them a double crochet is knitted, thereby closing 1 air loop located between the double crochets. We knit a row according to the pattern, closing 1 loop on the other side (according to the diagram). At this point the armhole cutout is ready.

Next, you need to knit straight according to the pattern until the height of the product reaches 21 cm. Fasten the thread, leaving a longer end for sewing the shoulder seam (I can’t specify about 50 cm, it’s better to leave a little more). Knitting the back is now complete.

Knitting flowers and sleeves

Wrap the thread on your finger once and knit 1 chain stitch and 1 single crochet into the resulting ring. This will be the beginning of the row. Work 10 chain stitches and work a single crochet into the ring. The result is a basis for knitting a petal. Make 6 such rings for the petals, ending the last chain with a connecting loop in the first single crochet.

We make the petal according to the pattern: 3 single crochets, 5 single crochets, 2 chain stitches, 5 single crochets, 3 single crochets. We repeat the pattern for all six petals. We close the row with a connecting loop, pull the thread to the wrong side and cut it leaving 8-10 cm. We pull the middle of the flower by the first end of the thread and tie the tails of the threads together. The first flower is ready. Next we will knit flowers, connecting them into a strip of 5 motifs during the knitting process.

We complete the first row of the flower (the first paragraph of the subparagraph). Next, we tie the first petal completely and the second one until the air loops begin.

We make one air loop, put the first flower on the hook with the front side facing us behind the arch of 2 air loops, perform the second air loop, thereby connecting 2 flowers at the tops of the petals. We complete the tying of the second petal.

Tie the third petal to the middle and connect it with the next petal of the first flower. Finish knitting all the petals of the second flower. Knit a bar of 5 flower motifs in this way, connecting them together by 2 opposite petals. One free petal remains at the edges.

Then you should make the same bar for the second shelf (another row of 5 connected colors). Right shelf strapping diagram:

Tying motifs 1 row. Let's start the binding from the leftmost motif. Insert a hook into the arch of 2 air loops of the third free petal (counting from the bottom, from right to left, see photo and diagram) and knit 2 single crochets. We tie the motifs carefully following the diagram. Knitting goes in a circle counterclockwise. We complete the row with a connecting stitch in the first single crochet.

Left shelf strapping diagram:

We perform the tying of the left shelf in the same way, starting from the third petal, but starting from the rightmost motif. We perform the first circular row of binding. Next, we knit according to the pattern only along the inner edge of the shelf. The result is 3 finished bolero parts. We immediately sew the side and shoulder seams to see how the bolero will fit on the child and to make it easier to control the required sleeve length and armhole depth. We perform the first row of tying the edge of the product according to the pattern (single crochet, 4 chain loops, single crochet into the next double crochet of the previous row, the bottom and neck are tied through a stitch, see photo and diagram).

The second row of tying the edge of the product is a shell made of 4 double crochets in a single crochet of the previous row and a connecting loop in an arch of 4 chain loops of the previous row. In the corners of the neck, instead of a shell of 4 double crochets, you should make 1 double crochet so that the neck lies evenly and does not turn out to be a stand-up collar.

We begin knitting the sleeves by making 3 floral motifs, connecting them into a ring during the knitting process.

How to tie a sleeve according to the diagram in step-by-step photographs:

Please note that in this bolero model the length of the sleeve reaches the phalanges of the fingers and thumb is pushed into the floral motif. If you want to get a classic sleeve, shorten the knitting of the main pattern by the required number of centimeters (5-6 rows - put the vest and sleeve on the child, and attach the edge of the sleeve to the edge of the armhole side seam). At this stage, circular knitting ends and then we will knit in turning rows, casting off 1 loop on each side in each row. So we knit 7 rows, decreasing 1 loop on each side in each row. The total length of the sleeve is 41 cm, not counting the sleeve binding, which is performed in the following paragraphs. Sleeve width is 11 cm (total girth 22 cm). We tie the bottom of the sleeve according to the pattern above.

The finished bolero must be lightly steamed from the reverse side in the “cotton” mode, but do not press the iron, hold it slightly over the canopy so that the product retains its knitted texture. You can also steam the product through gauze cloth or a white diaper. We thread it into the edge of the product between the shells satin ribbon, tie it with a knot, and then with another knot across the edge of the bar so that the ribbon “sits in place” when tying the bolero. We also thread the ribbon through the sleeves.

Beautiful product for a 3 year old girl

To please your little one with a new thing, you can make a little effort and knit such a beautiful jacket with your own hands. Let's take a closer look at how to crochet a bolero for a 3-year-old girl with descriptions and diagrams. This product can also be suitable for a 3.5 year old baby.

Materials for work:

• 100 g of baked milk colored thread (92% acrylic, 8% metallic) 400 m / 100 g;
• hook No. 3;
• matching button.

Schemes of work:

Before work:

Before you start creating a bolero, you need to make a full-size pattern, taking into account the individual parameters and measurements of the girl for whom the bolero is intended. Next, you need to knit and steam a 10 x 10 cm sample with the main pattern for preliminary calculation of the loops.

Work progress:

We will knit the bolero from bottom to top in one fabric. We collect the required number of v.p.

First r. 3 vp, 3 tbsp. s/n, *1 vp, skip 1 loop, then knit 4 tbsp. s/n*, continue from * to the end of the row. Finish row st. s/n.

Second r. Knit the entire row with arches of 5 ch, securing with 1 tbsp. b/n in 1 v.p. first row

Third r. We knit similarly to the second with arches of 5 vp, fasten them with 1 tbsp. b/n in the middle of the arches of the second row. But you need to start with 3 v.p.p. and finish 1 tbsp. s/n.

Fourth r. 3 vp, we knit arches from 4 vp, fasten them with st. b/n in the middle of the arches of the third row. Thanks to the fact that we started and finished the third row higher, the fourth row will be even for knitting the fifth row.

Fifth r. knitted similarly to the first one. In every 4 vp. we knit st. s/n, and above st. b/n we knit 1 ch.

For the pattern we repeat knitting 4 rows.

When the first 4 rows are knitted, you need to further knit the next 13 rows with increases according to the second pattern, then knit 8 rows without increases or decreases. Next you need to divide the canvas into 5 parts. On the pattern we indicate 19 cm for the right and left front front, 10 cm for the armhole and 20 cm for the back. Your numbers may be slightly different depending on the girl’s individual parameters. Markings can be made with a thread of a contrasting color, a pin, or a special plastic marker, which can be purchased at a craft store.

Shelves

Knitting openwork pattern. We decrease the loops along the outer edge in accordance with the pattern and the first diagram, which shows how to evenly decrease the loops. The height will be approximately 23 rows.

Back

We knit straight without increases or decreases to a height of 23 rows.

Sleeves

You need to attach a thread to the 4th row of the back, knit 35 vp. and secure it to the shelf. Now we need to knit 8 rows with a pattern without increases or decreases on these 35 vp. Then you need to knit decreases according to the first pattern until the end of the sleeve.

Sew shoulder seams and sleeves.

Now we tie the entire bolero along the front side as follows (see third diagram):

First r.*2 tbsp. s/n, skip 1 loop, 1 ch* continue from * to the end.

Second r.*2 tbsp. b/n, pico*. Continue to the end.

Now according to the fourth scheme tie a button :

First r. In a ring of 3 ch. knit 6 tbsp. b/n.

Second r. The number of loops must be doubled. We knit 2 tbsp into each. b/n.

Third r. Double the loops in every second stitch.

Fourth r. Double stitches in every third stitch.

Then we knit by analogy until the diameter of the circle reaches the diameter of the button. Now you need to attach the button to the wrong side of the circle. Knit 1 row without increases, and then knit rows with symmetrical decreases in stitches. Pull a thread through the last 6 loops and tighten tightly.

Sew a button on the openwork strip. Arch of 5 v.p. on the opposite shelf it will serve as a loop. The bolero is ready.

Knitting an openwork bolero

If we talk about methods of knitting bolero patterns, then we cannot fail to mention short jackets for girls. In combination with long sleeves, the product looks very romantic. Let's look at how to crochet a similar openwork bolero for a 4-5 year old girl.

Dimensions of the finished bolero:

Length - 20 cm; width - 26 cm; sleeve length - 23 cm.

Materials for work:

• 1 skein of yarn YarnArt IBIZA (60% viscose - 40% acrylic; 100g – 550m);
• hook number 3.

Knitting patterns:

Work progress:

We cast on the required number of air loops, a multiple of ten.

First, the back is knitted with the main pattern according to pattern 1, knitting seven centimeters, we shorten small armholes for the sleeves, about a couple of centimeters each (armhole height 13 centimeters). After knitting another ten centimeters, you need to make a cutout for the neckline and knit another three centimeters.

Then we knit the two front panels. We cast on the required number of loops, knit about eight centimeters and begin to shorten a little with each row, for a smooth neckline. We knit the second shelf in the mirror image of the first.

When all the parts are connected, they should be sewn. First the top seams, then the side seams.

The sleeve is knitted separately and sewn or crocheted, which allows the product to stretch and hold perfect shape. First, 12 centimeters of sleeve are knitted, then cut to fit the armhole and sewn on. After this, we knit the sleeve with another pattern according to pattern 2. First we knit from the first to the fifth row, and then repeat from the second to the fifth.

Master class on creating a summer bolero

It would be a great idea to crochet a summer bolero for a girl, because this versatile item will diversify the wardrobe of a little fashionista. A master class on crocheting a bolero for a girl with diagrams and descriptions will help with this. This bolero is suitable for girls 5-6 years old.

Bolero size:

Materials for work:

• hook No. 1.5;
• yarn - DIVA 100% microfiber acrylic (350 m, 100 g) pink color- 200 g., purple- 100 g;
• tape - 1 m.

Knitting pattern

Work progress

First we knit the back, then the fronts, and the sleeves.
Back: knit a chain of 89 chain stitches and knit 15 r. Next, for the armholes, decrease the loops on both sides in the next five rows according to the diagram (73 loops). Continue knitting another 7 rows. (27 rows in total).

Right shelf:

Knit a chain of 13 chain stitches. Next knit 15 r., gradually adding loops in each row with right side loops. Then, on the left side, decrease the loops for the armhole and at the same time decrease on the right side to cut the neckline according to the diagram. After knitting 12 rows, finish knitting (10 loops).

Left shelf:

Knit symmetrically to the right front.

Sleeves:

Knit a chain of 49 chain stitches, knit according to the pattern (for bolero with long sleeve- 15 rubles, with short sleeves - 11 rows). Next, decrease the loops according to the diagram in six rows. Finish knitting (13 loops).
Tie the sleeves and back according to the pattern with purple threads. Wash and sew parts of the product.

Bolero decoration:

Tie flowers. We got 17 flowers that need to be connected together.
Tie the right and left shelves and back neck according to the pattern.
Sew a ribbon of flowers to the front and back neckline. The bolero can be decorated as you wish, for example, by knitting small flowers of a different color.

Video lesson

To make it easier for beginner knitters to understand the features of the process of crocheting a children's bolero, it is worth looking at a few before starting work detailed videos master classes from professional needlewomen.

Video “crocheted bolero for girls”

It’s very easy to knit an elegant bolero for a girl! Even a novice needlewoman can cope with this task.

Today, especially for beginner craftswomen, we will talk about how to make a fashionable children's bolero with knitting needles. After carefully studying the educational master classes, you will be able to independently knit a summer openwork, as well as a winter holiday model of a children's bolero!

The bolero is considered a universal item in women's and children's wardrobes. It can be used as an additional accessory or simply thrown over your shoulders to stay warm on a summer evening.

To knit a children's summer bolero with sleeves for a 3/5 year old girl you will need:

• regular and circular knitting needles No. 3;
• yarn 150/200g;
• schemes.

When describing the entire knitting process, a list of generally accepted designations will be used:

• n. - loops;
• n. – thread throw;
• persons – facial;
• purl – purl;
• r. - row;
• “*” – repeating the pattern from the first * to the second*.

In this lesson, 2 types of patterns will be used for beginning needlewomen: faces. stitch, which we knit faces. p. odd r., and purl only even ones and the garter stitch pattern consists of faces. p.

We knit the openwork pattern strictly according to the pattern, starting to work from the back. sides:

• first row: *purl, n., knit – 11 pcs., n.*, purl;
• second, as well as all even rows: knit., *knit. – 5 pcs., double broach, faces. – 6 pcs.*;
• row No. 3 and 5: * purl, k, knit. – 5 pcs., purl, knit. – 5 pcs., n.*, purl;
• Row No. 7: *purl, knit 5, purl, knit 5 more, purl*.

Pay special attention to some features regarding openwork knitting. Model for a 3-year-old girl: the back, sleeves and front are knitted strictly according to the pattern: the rapport between the stars is repeated. We finish after * No. 2. Model for a 5-year-old girl: the sleeves of the product are knitted according to the pattern: rapport between * is repeated. We finish after * No. 2.

In the front part of the product, the report is repeated between *, and the loops end after * No. 2, but before “A”. The back begins to knit with the front. Then the stitches located in front of * No. 1 are knitted. The rapport is repeated between * and the row ends with loops coming after 2*, making 1 person.

The knitting density of this model is: 10 cm = 29 p. Repeat pattern in height = eight p.
Master class on knitting a summer children's bolero. Cast on 124/128 stitches for the right half of the front part of the product. Knit garter stitch 1/5 pcs. Openwork – 121 pcs.

Next, close 1 r. 1 p. garter stitch. Having formed 8 rubles according to this scheme. go to l. smooth surface Do 4 p. First items – 78 pcs. transfer to the auxiliary needle. Subsequently, they will become a string for the bolero. Knit the remaining stitches with openwork.

When comparing patterns, make a decrease for the neckline: knit four cm, in each subsequent 4 r. knit the faces. 3 and 4 p. 15/17 times. Also, according to the scheme, make a decrease for the armholes: having formed 7/8.5 cm of knitted fabric, close 6 pieces. In each even r. decrease 3X1 p. Having completed 17.5/20 cm, close the loops. Knit the left side in a mirror manner using the same pattern. For the back, you need to cast on 88/96 sts with knitting needles. Next you need to knit a scarf. pattern - 1/5 p., openwork - 85 stitches, again a scarf pattern - 1/5 p. Using this technique, 8 r.

Next 4 rubles. persons satin stitch and openwork pattern. Eight cm from the beginning of knitting, we make decreases: on both sides, close 6 stitches, on both sides in even rows. decrease 1 point three times. Having knitted to the required height, close p. 28/32 p. in the center, leaving it to form the neck.

For the sleeve knitted product cast on 64/70 p. We knit 1/4 p. with a garter pattern, lace – 61 pcs., and then complete the r. garter stitch. Having formed 8 openwork r., we make 4 r. facial stitch. We continue knitting with openwork.

Having completed 4 cm on both sides in each 6 r. make an increase: 2X1 p. Having knitted seven cm on both sides, close off 6 p. In even r. decrease 1 p. sixteen times symmetrically. Close the p. At the end of the master class on knitting a children's bolero, we assemble the finished product. First of all, we make the shoulder seams. Then, for the right tie of the children's cape, we move 78 sts onto the knitting needles. Along the neckline on the right side we cast on 60/64 sts. From the back we transfer 27/31 sts. Along the neckline on the left side we cast on 60/64 sts. For the left tie we move exactly 78 sts.

Next we knit according to the following pattern: knit. – 1 r., garter pattern – 1 p., openwork – 301/313 pcs., garter stitch – 1 p. Having formed 6 r. close the loops. We process the remaining seams. Steam the product. At this point the master class can be considered complete. An openwork bolero for a girl, knitted, is ready!

Master class on knitting a children's bolero from grass

For every girl New Year- this is a special holiday, because on this day you can not only receive a gift from Santa Claus, but also show off your outfits. All the girls are looking forward to New Year's party V kindergarten, because that’s where they’ll be circling in white fluffy dresses like real snowflakes.

A great addition to snow-white festive dress will be a fluffy bolero for a girl made from grass. It will not only decorate the outfit, but will also warm the girl during the holiday. To make a fluffy bolero for a girl you will need:

• white grass;
• circular knitting needles;
• colored paper clips or special markers;
• pins;
• scheme.

Describing step by step process to create a knitted product for girls, we will use the same abbreviations as when describing the openwork model.

We are starting a training master class on knitting a fluffy elegant cape for a girl. First, we create a small sample: cast on 20 p. and knit 10 r. We calculate the number of buttonholes for the bolero. To do this, you need to measure the circumference of your neck. In this lesson, the girth is 28 cm, which means you need to cast on 62 stitches + 2 edge stitches. Next, we distribute the items: for raglan - 8 pieces, for the back - 18, for each sleeve and front - 9.

Persons r. knit with knit stitches and purl with r. - purl. At 1 p.m. We mark with markers 2 points each. Subsequently, before, as well as after the marker, you will need to do n. We form the desired length of the product up to the sleeves. In this master class, 6 cm was knitted.

The loops for the sleeves of a knitted bolero need to be transferred to a pin. If the cape for a girl is sleeveless, then in this part of the master class, the loops are simply closed. Having moved the loops, you need to continue knitting the back. For this model, 23 cm was knitted. After this, the loops are closed, and we begin knitting the sleeves. This part of the product is knitted. p. in a circle.

The second sleeve is knitted according to the same pattern as the first. At the end, close the loops and cut the thread.