Knit a warm scarf with knitting needles. How to knit a scarf (men's and women's) with knitting needles and crochet. Educational video lesson for everyone

Knitted scarves are the item of clothing that every person needs in the autumn-winter period. Yes, and on a summer evening you can cover your shoulders beautiful scarf stole with openwork knitting. Knitting a scarf can be both easy and difficult, depending on which knitting you choose. Next we will look at different variants knitting scarves.

Beautiful feminine openwork

For a white women's scarf, knitted openwork pattern. This type of knitting is always in fashion. But it should be noted that the trends in recent years have been towards larger patterns and thicker yarns.
Size: 44 by 160 cm.
You will need:
— Novita Crystal yarn (51% acrylic, 18% polyamide, 13% polyester, 18% mohair, 55 met/100g) — 500 grams;
- knitting needles No. 7;
- hook No. 6.
Density: 14 p. =10 cm

How to knit a scarf with knitting needles:

1. Cast on 65 loops and knit 5 r. garter stitch (all stitches knit).
2. Go to openwork according to the diagram. Distribute the stitches as follows: 4 sts. handkerchief knitted, 7 sts. openwork pattern until repeat, then repeat repeat from 14 stitches. 3 times, 8 pets. pattern after rapport and 4 stitches. handkerchief viscous. Repeat the scheme for the first time from the 1st to the 14th r., only then from the 15th to the 30th r. all the time.
3. At the moment when the height of the product becomes approximately 150 cm (and you have knitted the 30th row), knit the 31st and 32nd rows.
4. Finish with six rows of plaid stitch and bind off the stitches.
5. Do not cut the thread. Using a hook, tie along the long sides like this: 4 chain stitches for lifting, * skip 1 stitch of the bottom row, column s/n, chain stitch * - repeat from *.
6. If desired, you can decorate the scarf with fringe. To do this, cut 40 cm pieces of thread, fold them in half and tie them along the short sides of the scarf.

Two-color pattern

An interesting model from Verena magazine. An original double-sided scarf pattern was used.
Knit the pattern “Anemones and stripes” according to the pattern. The letters indicate the color of the threads that need to be knitted in a circle: A - white; B - gray.

Double patterns are ideal for knitting scarves.

Prepare Lotus Yarns Mimi yarn for the scarf (100% American mink wool, 300m/50g) - 50g each of white and gray colors and short circular knitting needles No. 3.5 on 40 cm fishing line.
Density: 27 p. = 10 cm

Knitting pattern for a scarf:

1. Cast on 80 stitches with white thread, close it in a ring, mark the beginning.
2. Tie 108 round. (=23cm), repeating in height 4 times the section on the diagram marked 4x (from 1-24r.).
3. Next, knit rows 97 to 108 once.
4. Section with stripes: repeat from 109 to 112 r., alternating 2 r. white and 2 r. gray color 61 cm long. Here do 1 r. in gray tone is the middle line.
5. From now on, draw the scarf symmetrically, using the colors in reverse.

Beautiful pattern for a scarf, easy and simple

This scarf can be knitted quickly and easily.

Completely easy and at the same time beautiful pattern for a mesh scarf. Even a novice craftswoman can cope with such work. You can knit this scarf very quickly.
Size: 30 by 200 cm.
Prepare:
— Eskimo Drops yarn (100% wool, 50 met/50 g) — 300 g;
- knitting needles No. 10.
Density: 8 p. = 10 cm
Mesh pattern: * Purl 2 stitches together, yarn over * - repeat from *, k1.
Repeat only this row.

How to knit a scarf with knitting needles:

1. Cast on 25 sts on two needles (to get a more elastic edge).
2. Pull out one needle and continue with a 200 cm mesh pattern. Cast off the stitches loosely.

From rhombuses and braids

When talking about knitting patterns for knitted scarves, it is impossible to ignore the options with diamonds. A chic women's stole scarf made of yellow-green wool yarn will warm you in bad weather.

Dimensions: 40 by 170 cm.
You will need:
— yarn Merinos Sei Mani di Fata (100% merino wool, 125 met/50 g) — 600 g;
- knitting needles No. 4.
Density: 23 p. = 8 cm (A)

Pattern A: follow pattern A. Purl p. - according to the drawing.
Cross 2 stitches to the right: transfer 1 stitch to the additional knitting needle behind the work, knit 1, 1 st from the additional knitting needle;
Cross 2 p. to the left: move 1 p. to additional sp. before work, 1 knit, 1 p. with additional sp. knit.;
Cross 6 sts to the right: move 4 sts to additional sp. at work, 2 persons, first 2 points with additional sp. knit purlwise, knit the other 2 stitches;
Cross 6 sts to the left: move 2 sts to an additional sp. before work, k2, p2, then 2 sts with additional sp. knit faces.

Pattern B: knit according to pattern B. Purlwise. knit according to the pattern. Repeat for the first time from 1st to 28th r., then start from the 3rd r.
Cross 3 sts to the right: 1 st on the auxiliary needle at work, 2 knits, 1 st with the auxiliary needle. sp. purl;
Cross 3 sts to the left: 2 sts on an auxiliary needle before work, purl 1, knit stitches with an auxiliary needle;
4 sts to the right with an increase: 2 sts on the auxiliary sp. at work, k2, add 1 p. purl, knitting it from a crossed broach, 2 p. with an auxiliary sp. persons;
5 sts to the right: put 3 sts on the auxiliary sp. at work, knit 2, move to left sp. first p. with auxiliary sp. and knit it purlwise, knit the two remaining sts.

Rice:
Row 1: * K1.. P1. *
2p.: above the faces. - inside out; over the wrong side - persons

Knitting pattern for a women's scarf:

1. Cast on 93 stitches and knit with the pattern Rice 21 p.
2. Next (purl), continue the first and last 5 sts in Rice knitting, and knit the middle 83 sts purl, adding 26 sts (make increments crossed) (=119 sts).
3. In the 23rd litsa district. distribute the loops as follows: 5 p. Fig., * 23 p. pattern A, 20 p. pattern B * - repeat from * 1 more time, 23 p. pattern A, 5 p. Fig. (=121p.)
4. Knit to a height of 168 cm, ending with the 28th row according to pattern B. In the middle 111 loops, cut 28 sts.
5. Finish 21 next to the pattern Fig.

Structural pattern

Repeating structural stitches are often used to knit scarves. One example is a model from Burda magazine made of turquoise wool threads.

Length 198 cm.
Prepare:
- yarn with characteristics 50met/100g (65% alpaca, 35% wool) - 500 grams;
- straight knitting needles No. 4.5.
Drawing:
1, 2, 5, 6p: k1, p1;
3p.: P1, k3;
4p.: 3p., 1knit.;
7p.: * 1 p., 3 knit. * - repeat from *, finish 1 person;
8p.: 1 p., * 1 knit., 3 p. * - repeat from *, finish p2.
Density: 20 p. = 10 cm

Progress:
Cast on 50 stitches and knit with the main pattern adding edge stitches, which are knitted on both sides.

With perky cones

The following pattern with a description is a blue voluminous scarf on knitting needles with a pattern of large cones and braids.

Required:
— Rowan Big Wool yarn (100% wool, 80 met/100 g) — 400 grams;
- knitting needles No. 10.
Density: 16 p. = 10 cm
Edge stitches at the beginning of the river. knit with knit stitches at the end of the p. remove like a purl, thread in front.
Cones: knit 5 from one (knit 1 behind the back wall, yarn over, knit 1, yarn over, knit 1 behind the back wall). Then turn, knit 5 p., turn again, knit 5, turn, knit 5.. Turn around and knit 5 stitches together.

Scarf manufacturing technology:
Cast on 30 stitches and knit with an elastic band:
1, 3r. (purl style): chrome, 1 knit, * 2 purl, 2 knit. * - 7 times, purl 2, knit 1, edge;
2, 4p.: chrome., 1p., * 1/1P (see description of how to knit in the chart legend), 2p. * - 7 times, 1/1P,
1 purl., chrome.
5 rubles: like the first.

4 models in one pattern

An interesting idea was proposed by Diana magazine - how you can knit 4 different scarf models with the same pattern: a narrow two-meter scarf with pockets, a collar and a loop. Whichever one you like best, knit it!

Yarn used is Schachenmayr SMC Silencio (50% polyacrylic, 25% wool, 25% alpaca, 60m/50g) in white, burgundy and gray colors, knitting needles No. 7, hook No. 6.
For a stole - 200 grams of each tone, with pockets - 100 grams, for a collar - 150/100 grams, for a loop - 100 grams.

Pattern 1 is for knitting on straight needles, pattern 2 is for knitting in the round. Perform rows 1-22 once, then 11-22 rows.
Alternating stripes: 4 p. white, * 6 rub. gray, burgundy, white * - repeat from *.
Density: 15.5 p. = 10 cm

Stole: 52 x 150 cm.
Cast on 82 stitches on straight needles in white and knit straight and reverse stitches. When you knit 150 cm, knitting 5 r. white, close the loops. Make tassels from 16 cm pieces gray in two threads and decorate along the short sides.

With pockets: 22 x 190 cm.
Start by casting on 34 stitches in white. and knit according to c. 1 - 190 cm. Knit 2 pockets of 18 stitches in a burgundy tone with stockinette stitch - 10 cm, then 2 cm with an elastic band (K1, P2). Sew it to the scarf, make a fringe along the bottom, as indicated above.

Scarf collar: 35 x 80 cm.
On circular knitting needles, cast on 104 stitches in white, close in a circle and knit according to d. 2.

A loop: 12 x 240 cm.
Start with 18 stitches in white. according to cx. 1. Knit 240 cm and finish after six p. burgundy color Do not close the loops, but use a knitted seam to connect them to the cast-on edge.

- it's the same knitted scarf, circular only. They can be small with one revolution or huge with two or more revolutions. For example, a blue openwork snood that can be worn on the head or as a blouse.

Dimensions: 45 by 155 cm.
You will need:
- Brown Sheep Company Nature Spun Sport yarn (100% wool, 168m/50g) - 250 grams;
- circular knitting needles No. 4.
Density: 20 p. = 10 cm

Scheme of how a knitted snood scarf works:
Cast on 304 sts, close into a ring and mark the beginning of knitting with a marker. Knit lace A six times, then lace B 12 times. Finish knitting the scarf with knitting needles, loosely binding all the loops.

To knit a scarf for a woman (new models will be discussed in this article), it is enough to have basic knitting skills and some patience, and a wide variety of yarn of different colors and textures will help replenish your wardrobe with stylish knitted items.

Before you start knitting a scarf, you need to be able to knit knit and purl stitches.. Having mastered these simple skills, you can become a knitting ace.

Having decided on the size of the fabric of the future scarf, you need to start choosing yarn, which at the initial stage of mastering the skill will focus on the original combination of colors of the finished scarf, and not on the complexity of the pattern.

Professional knitters treat the choice of yarn as a sacred rite, because it opens up before them Magic world, filled with extraordinary colors, a feeling of softness, warmth and tenderness of exquisite threads.

A scarf is one of the main accessories for women. Link new and beautiful model very simple, for this you need to select knitting needles and yarn.

It’s easy to knit a scarf for a woman, new models: snood, transformer and openwork scarf very popular today

Modern manufacturers make it easier for needlewomen and indicate a lot of useful and necessary information on the label of each skein of yarn, from composition, weight, thread length and tips for caring for the finished product, to the recommended number of knitting needles.

And what better mood, the more positive the emotions, and the more choice, the more original the knitted product will be.

There are several points to consider when choosing yarn for knitting a scarf:

• Yarn consumption. For a product about 1.5 m long and 20 cm wide, you will need 300-350 g of wool.
• Type of yarn. Based on the main characteristics of the finished product, such as model, seasonality, allergenicity, you need to choose a certain yarn composition: natural, synthetic or blended.
• Thread color. For simple knitting, you should choose multi-colored yarn: melange or segmental dyeing.
• Thread texture. Using ribbon or ruffle yarn for knitting, you can a short time knit the original product.

When choosing knitting needles, it is necessary to take into account their size, the material from which they are made, lightness, smoothness and sharpness of the ends.

For beginners, it is advisable to choose knitting needles of medium diameter, wooden or plastic.

This will create comfortable working conditions, and the finished product will sparkle with the beauty of its threads and elasticity.

Interesting fact! Nothing is impossible for women! A resident of the Netherlands got into the Guinness Book of Records thanks to her knitting needles. The Englishwoman knitted a new and most original scarf model with a length of 62.5 km, thereby breaking the previous record set in 1988 at 33 km.

New models of scarves knitted for women

Most women have several weapons in their arsenal that help them look interesting, original and unique every day, one of them is a knitted scarf.

The individuality of each woman depends on how original the knitted product’s model, color scheme, and texture are.

Taking several knitting patterns of a popular accessory as a basis, you can experiment endlessly:

• Snood is a wide looped scarf.
• Transformer - a scarf that replaces half a wardrobe.
• A collar scarf is convenient to use under any outerwear.
• A cape scarf will help keep you warm in bad weather and create an elegant look.
• The scarf-hood is comfortable and versatile, eliminating the need for a hat.

Choosing patterns for knitting a scarf

To knit a new scarf, you need to decide on the product model, size and choose an interesting pattern, because for women this is also an opportunity to demonstrate their design abilities.

All kinds of patterns are used to knit new models of women's scarves., created both by alternating knit and purl stitches, and by combining yarn of different colors.

Let's look at some of them.

• Elastic band: American, from crossed Letka-Enka loops, openwork, fluffy, Polish, French, Leningrad, faceted, semi-English.
• Openwork patterns: waves, stripes, diamonds, Japanese openwork, etc.
• Relief weaves: plaits, braids.
• Jacquard patterns: hearts, maple leaves, squirrels, acorns, waves, antennae, etc.

Lazy patterns: dominoes, mosaic squares, ladder grid, chevron stripes, dotted line, labyrinth, collected stripes, etc.

Step-by-step instructions for different scarf models

This section will look at how to knit a scarf for a woman. New models will allow you to look stylish and beautiful in any situation, and step by step instructions will help you correctly and consistently organize the entire process of creating a product.

Classic scarf

For the classic model, the easiest way is to use garter stitch; all rows are knitted facial loops, in this case the first loop is removed, and the last one is always knitted purlwise.

Alternating threads different color every 2 rows, the scarf will turn out more interesting.

Having decided on the length of the future product, you can begin to set the loops.

1. The recommended width of the scarf should not exceed 35 cm; it should be assumed that 10 loops give a width of 5 cm. When the required length of the scarf is reached, it is necessary to finish knitting.
2. The finished needlework is on the left knitting needle, two loops are knitted at once with the right knitting needle, and the resulting single loop from the left knitting needle must be thrown back to the right.
3. Next, 2 loops on the right knitting needle are again grabbed, and the loop from the left is thrown back to the right, knitting continues until 1 loop remains. After which the thread from the skein of yarn is broken, pulled through the loop and tightened.

Snood or scarf "collar"

Snood quickly became fashionable last season and became firmly entrenched in the wardrobe of most fashionistas. I love this scarf because of its versatility.

By twisting it in the shape of a figure eight you get a voluminous collar, throwing it over your head you can wear it instead of a hat, and you always have an original warm scarf around your neck.

Knitting needles No. 7 straight or circular, knitting in 2 threads, length – 150 cm, width – 30 cm, Lanoso Alpacana Fine yarn: 100 g – 220 m – 2 skeins.

1. Leaving the end of the thread at 50-70 cm, cast on 40 knit stitches, remove the first one, purl the last loop. We knit in reverse rows. The length of the knitted product is measured in centimeters.
2. Having cut off the thread of the ball, you need to start sewing the snood from the purl side. Having evenly laid out the fabric of the finished product, you need to attach the edges to each other, with one end of the scarf on the knitting needle. The 50-70 cm thread left in advance is threaded into the “gypsy” needle.
3. The needle is inserted into the first loop of the edge on the knitting needles and removed onto the needle. Next, the needle is inserted into the edge loop of the free edge and pulled through.
4. Then, from top to bottom, the needle is inserted into the second edge loop, pulled out and inserted into the first removed loop, and pulled out again.
5. The needle is inserted into the loop on the knitting needle, pulled through and removed. Next, the needle is inserted into the edge loop from below, and into the next edge loop from above, pulled up, and the needle is pulled into the previous removed loop, and thus the snood is stitched to the end.
6. At the end, a thread 13 cm long remains and is hidden in the snood using a hook. Using a crochet hook, pull both threads through any loop, then pull 1 thread through the nearest loop, tie both threads together in a knot, and do such manipulations 2-3 times so that the threads do not unravel in the future.

Scarf - transformable

Knitting a model of such a scarf with knitting needles is quite easy, and for women it is important to have something new in their wardrobe every day, because a transformable scarf can easily turn into a skirt, dress, hood, bolero, poncho.

Circular knitting needles No. 7, yarn 100% polyamide Tango “grass” – 6 skeins, the length of the product is chosen independently.

1. Leaving the end of the thread at 50-70 cm, cast on 100 knit stitches, remove the first one, and purl the last loop. Knit in reverse rows, without tightening the loops too much, until the required length is reached.
2. You need to finish the finished product like the snood scarf in the description above.

For allergy sufferers, it is better to use baby yarn, cotton, linen, merino, viscose and high-quality acrylic

Attention! For people with hypersensitivity to various types of allergens, especially clothing ones: dyes, synthetic polymers, it is worth choosing hypoallergenic yarn.

Scarf collar

A collar scarf is a convenient and practical accessory. Models may vary and not similar friend on each other, but what they have in common is that they fit tightly around the neck.

A knitted product can resemble a high collar from a sweater, a shirtfront, or it can be an original accessory, the edges of which are connected using bright buttons, brooches or knitted flowers.

Circular knitting needles No. 6, yarn: acrylic, polyester, wool; thick thread, product width 20-25 cm, length 60-70 cm.

1. You need to cast on 30 knit stitches and knit the entire scarf in garter stitch, i.e. All loops are knit, the first edge loop is removed, and the last one is knitted purl. In this way, the entire fabric is knitted until the required length is reached.
2. The finished canvas must be laid out on a flat surface and the edges folded. Bend the top edge to the left, the bottom edge to the right, so that bottom edge upper bend, connected to the upper edge of the lower one. Where the two edges touch, the edges need to be sewn, the seam should be 11 cm.

The finished product is turned inside out. An original accessory is sewn onto the turned-down corner.

Scarf - cape

Another popular and versatile item women's wardrobe– scarf-cape. It will warm you in cold weather, protect you in windy weather and create an elegant look.

There are several types of capes: shawl, boa, stole.

Knitting needles No. 8, Lanas Stop yarn: 2 skeins Dakar (acrylic, mohair, wool), 2 skeins Silver (mohair, polyamide, lurex)

The product must be knitted in 2 threads (Dakar+Silver) in garter stitch, with all knit stitches.

1. To begin with, you need to cast on 2 knitting stitches on the knitting needles and knit, adding 1 loop in every second row on both sides until the number of loops reaches 40.
2. Knit to a product length of 120 cm and change the style to the following: knit 1, slip 1 stitch on the auxiliary needle, purl 1, slip 1 loop on the auxiliary needle. Repeat the manipulations until there are 20 loops on the auxiliary needle and 20 on the main needle - this is a 1/1 elastic band.
3. Place the loops at a height of 15 cm. Knit 20 stitches on a auxiliary needle with 1/1 rib. At a height of 15 cm, combine with 20 loops on the main needle. Knit with knit stitches, alternating 1 loop from the main knitting needle, 1 from the auxiliary knitting needle, up to 40 loops.
4. Continue knitting in stockinette stitch, decreasing 1 stitch on both sides in every second row until 2 stitches remain. When finished, close the loops.

Important to remember! Knowing how to knit a scarf for women is not enough; new models must still retain their shape and color for long months or years. For this knitted products self made requires special care.

Handicrafts must be washed by hand at a temperature of 30-40 degrees

Wring out through a towel and lay out to dry on a flat surface.

Scarf - hood

This type of scarf is indispensable in bad weather when you don’t have a hat or hood on hand for outerwear. This accessory will decorate your look on a clear day and will warm you up on a cold day.

For women who want to knit a cowl scarf, this task may seem difficult or new, but most patterns are quite easy to knit.

Knitting needles No. 6, melange bouclé yarn 670 g.

1. 22 loops are cast on, and 184 rows or 92 cm are knitted in a pattern according to pattern 1.
2. On the back side, add 1 stitch after the edge stitch - four times in every 4th row and 10 times in every 2nd row. Afterwards, knit 40 rows and start decreasing in reverse - 10 times in every 2nd row and four times in every 4th row, working 2 stitches together immediately after the edge stitch.
3. Knit another 184 rows. From the front side on the 188th row, start adding a stitch in every 2nd row - 6 times.
4. 80 rows are knitted evenly, then decreases are made 6 times along the loop, then knit without changes.
5. At the end of the work, close all the loops.

Openwork scarf

Sometimes subtle details can add femininity, elegance and sophistication to an image. It is important for women to feel at ease in their appearance and have their own style.

Openwork scarf models, knitted, will play in a new way casual clothes and will add the necessary zest to the image.

Knitting needles No. 3, Knit One Crochet Too Douceur Soie yarn (mohair/silk), product length – 147 cm, width – 28 cm.

1. Cast on 59 stitches.
2. Row 1 (wrong side): The 1st stitch is removed purlwise, then knit stitches to the end. Repeat the first row of purl stitch in ribbed stitch until 7 rows have been knitted.
3. Now the openwork pattern is knitted. 1st row (front side): Having worked the first row of the pattern, from 1 to 6 loops, knit, repeating 6 loops (loops 7-12) 7 times in the pattern, 6 loops - repeat, then work loops 13-23. Continue in this manner following the diagram. Repeat rows 1-16 of the pattern 24 times. And again 1 row of the pattern.
4. Next row (wrong side): slip 1 stitch purlwise, knit to end of row. Repeat this row 5 times. Afterwards, loosely close the loops.
5. Final processing. The scarf must be laid out on a flat surface, stretched and secured strictly according to the calculated dimensions. Spray with water and let dry.

This article focused on how to knit a scarf for women. New models of original accessories can be easily used by even beginners, but with some patience.

Having gained experience, you can experiment ad infinitum, delighting yourself with bright, the most delicate scarves, and surprising others in a stylish way.

How to knit an openwork scarf with knitting needles. Simple openwork pattern with knitting needles. Watch video instructions:

All about snood scarves and knitting for women. Watch this helpful video:

Knitted scarves are absolute favorites in the wardrobe, from the smallest to the adult representative of humanity. Their variety is simply amazing: both dense; voluminous and thin; transformers and snoods; male and female. Popular accessories are knitted: knitting, crocheting and simply by hand, without the use of knitting tools. In our last article we told you in detail how to knit or girls, in this article we will tell you how to knit a scarf with knitting needles, with diagrams and descriptions. We will also take a closer look at the basic models for beginning needlewomen.

A classic accessory, knitted quite simply and shaped like a rectangle. Experienced craftswomen recommend that inexperienced needlewomen begin to hone their skills with knitting simple products, for example, a scarf. At the same time, take diagrams of simple patterns and only then move on to more complex designs. In this case, mastering the art of knitting will be interesting and will not end at the beginning, when beginners try to start knitting with very complex patterns and products. As a result, everything is abandoned, with the thought that this is a very difficult task.

Three simple patterns for a scarf with knitting needles:

Method No. 1: Elastic band 2x2

The method is convenient and in demand, the product does not stretch when knitted in this way and retains original appearance and due to the volume it is quite warm. Suitable for winter options accessory.

Elastic pattern 2x2

Description of the scheme:

1 r: edge, *k2, p2* - repeat until the end of the row, finish the knit row, turn.

2 r: chrome, *p 2, knit 2* - repeat until the end of the row, finish the knit row, turn.

Alternate rows 1 and 2, to the required length of the product or according to the drawing.

Method number 2: Relief pattern

The pattern has a different name, it is also called “checkerboard”. It holds its shape well, looks beautiful and is quite easy to knit. In this option, the number of loops can be changed arbitrarily, then the shape of the chessboard will change, and accordingly the pattern will look different.

Checkerboard pattern

Description of the scheme:

The repeat consists of 6 loops, not counting the edge loops.

R: edge, *k3, p3* - to the end of the row, edge (knit), turn.

2 r: chrome, *above faces. P3, over P3* - to the end of the row, edge(s), turn.

Method No. 3: Relief pattern No. 2

This simple pattern will allow you to quickly master knitting and add another fashion accessory to your wardrobe.

Description of the scheme:

Rapport consists of 6 loops. The pattern consists of knit and purl stitches.

Row 1: edging, *P2, knit 4*, to the end of the row, edging, turn.

2 rows: edge, *4 purl, k2*, to the end of the row, edge, turn.

Knit the 3rd and 4th rows like the first two.

5 r: edge, *k2, p2, k2*, to the end of the row, edge, turn.

6 r: edging, * 2 purl, 2 knits, 2 venting *, to the end of the row, edging, turn.

Knit rows 7 and 8 like 5 and 6.

9 r: edge, *4 purl, k2*, to the end of the row, edge, turn.

10 r: edge, *k4, purl 2*, to the end of the row, edge, turn.

Rows 11 and 12 are the same as rows 9 and 10.

Now continue knitting starting from row 1, and finish pattern 12 next to it.

Simple scarf with pockets and fringe: diagram, description

An excellent model for beginner needlewomen. The accessory is knitted in simple garter stitch and is complemented by pockets and fringe. The pockets are made with a “braid” pattern, a diagram with a description of the work is below. Size of the finished product: width – 30 cm; length (without fringe) – 2 m 10 cm.

Materials used:

• Yarn (80% wool, 20% acrylic) – 300 g;
• Straight knitting needles No. 4;
• Additional knitting needle or pin (for braids) – 1 pc.;
• The needle is big.

Sample of the main fabric: 10x10 cm = 18p/34r.

Pocket pattern: 22p/28r.

Description of work:

We knit the main fabric according to the pattern:

The diagram shows that all front and back rows are knitted only with front loops.

On a working knitting needle, cast on the required number of loops, in our version = 50 pieces.

Knit with a 210 cm scarf pattern. The edge loops are counted separately and are always knitted at the end of each row with a purl loop. At the beginning of the row, the loop is removed onto a working needle.

Additional details are knitted according to the pattern:

Pocket

Cast on 34 stitches and knit according to the “pocket diagram” pattern. We knit up to row 48 and bind off the loops. We knit the second pocket in the same way.

Cast on 34 stitches + 2 edge stitches on the knitting needles.

1 r: chrome, P3, k6, P2, K12, P2, K6, P3, chrome.

2 r: chrome, k3, p6, k2, p12, k2, p6, k3, chrome.

Rows 3 and 4: knit similarly to the first two.

5 r: chrome, knit 3, *slip 3 stitches onto an additional needle as knit stitches, knit the next three stitches and with extra stitches. knitting needles also knit 3*, knit 2. Remove 6 spokes for extra. knitting needle, knit the next 6 knits, then with aux. knitting needles 6 knits, 2 knits and repeat from * to * again, 3 knits, chrome.

In this simple way, following the pattern, knit the pocket to the desired height.

Knit the second part in the same way as the first.

We sew the pockets to the main fabric at a distance of 15 cm from the edge of the product and decorate the edges with fringe.

Fringe:

Cut the yarn into pieces of 40 cm. Fold 4 threads together, bend them in half and hook them into the edge hole, resulting in a loop. Then insert the ends into the loop and tighten. So, at a short distance from each other, decorate the product with tassels at both ends.

Moisten the finished product and dry it on a flat surface.

Two-color scarf knitted

A simple way to knit a two-color scarf will allow any mother to turn her baby into a fashionable person. For beginning needlewomen, this is a great option to practice your hand and learn how to knit even and identical knit stitches.

The size of one piece is 15 cm wide and 100 cm long. Product parameters can be changed depending on the age of the child.

Materials used:

• Yarn of two contrasting colors - 2 skeins of 50 g each;
• Knitting needles according to yarn size;
• Decorative buttons – 10 pcs. (5 pcs. for each thread color).

Description of work:

The product is knitted in garter stitch, first a strip of one color is made, then another.

Twist the parts together in the middle and connect the ends with buttons, as shown in the figure.

A fashionable accessory is ready to make your beloved baby stylish.

Stylish scarf with loop

Knitting an original scarf with knitting needles is not difficult; for this you need to purchase thick yarn and knitting needles big size. The model is interesting because it has a loop that allows you to wear the scarf in several ways.

Material:

• The yarn is thick
• Straight knitting needles – 6 mm.

The main pattern of the fabric is 2x2 elastic (diagram attached).

Finished product size: 16 cm – height; 123 cm – length.

Progress:

Cast on 32 stitches on the knitting needles, two of them edge stitches. Knit according to the pattern:

Description of the scheme:

Row 1: *K2, P2* - to the end of the row.

2 r: *P2, k2* - to the end of the row.

When you have knitted 50 rows, remove 4 stitches on an additional needle (1 edge, k2, purl 1) and continue knitting only these four loops, according to the pattern. Knit a strip the width of the scarf, in our case it is 19 rows. Set the connected part aside.

We continue to knit the main fabric. Without knitting 4 loops to the end of the row, according to the drawing. Having raised the main fabric by 19 rows, we leave it. Now you need to knit the second loop from the remaining 4 loops.

We knit the strip to the total height and transfer all the loops to one working knitting needle. Knit the required number of rows to obtain the desired length. Close the loops.

Fasten the ends of all threads and hide them in knitting.

The original scarf with a loop is ready.

Super-voluminous scarf knitted from thick yarn

An extraordinary and outrageous look can be created with the help of a voluminous scarf that almost completely covers the entire figure. The accessory is extravagant and not everyone will dare to try it on their image. But wrapped in a soft and warm linen, everyone inside will feel cozy and comfortable.

The product knits quickly and easily. It will take a large amount of yarn, but it’s worth it, because in the end you will get a unique thing that can warm you up not only at work, but on long winter evenings at home.

A small detail, the loops when knitting must be even and identical, otherwise the product will look sloppy. To test your skill at making perfect loops, knit a sample and make sure that the fabric is uniform and without flaws.

Material used:

• Thick yarn (97m/170g) – 3 kg 400g;
• Knitting needles according to yarn size, 25mm.

Finished product size: width – 45 cm; length – 400 cm.

The main fabric is knitted in stockinette stitch.

Fold the yarn into 4 threads (according to the pattern in our knitting, 10 cm - 4 loops).

Progress:

Cast on 18 stitches and knit the first 4 rows in garter stitch (all stitches are knit). The edge loop is always knitted purlwise.

Knit 5 and subsequent rows according to the pattern:

Description of the scheme:

Purl rows are knitted with purl stitches.

Facial rows with facial loops.

Work in stockinette stitch the entire length of the piece and finish with 4 rows in garter stitch. Close the loops. Cut the thread.

Openwork scarf-pipe: diagrams, description

The openwork and delicate accessory has the shape of a cone, narrowed at the top. It is this solution that brings additional comfort while wearing it. The question arises how to knit such a beautiful work of art with your own hands. Answer: simple and easy if you follow the job description and look carefully at the diagrams.

Material:

• Yarn (100% alpaca, 50g/175m) – 2 skeins;
• Circular knitting needles 4mm and 4.5mm, line length 70 cm.

Finished product dimensions:

• Height – 45 cm; top circumference – 60 cm; below – 75 cm.
• According to the sample, pattern density: 10 cm x 20 loops.

Description of work:

Cast on 153 stitches on 4.5mm needles.

1 r: knit all the loops, close the knitting into a ring.

2 p: purl all loops.

3 r: all loops are knit.

Starting from the 4th row, we switch to an openwork pattern according to the diagrams:

We start knitting the pattern from pattern M1.

1 r: *k3, k2 together, k4, yo, k6, yo. K2tog, k2, yo, k2tog, k2, yo, k2tog, yo, k4, yo, k4, k2tog, k3* - repeat 4 times, end the row of knits with a loop.

Thus, according to the pattern, knit 4 rapports up. There are 137 loops in the work.

Change the needles to 4 mm and start knitting the M2 pattern. Also knit 4 rapports up.

We move on to the last pattern M3 and knit 1 rapport up. There are 121 stitches on working needles.

Finish the work with three rows that you started knitting with. Close the loops. Break the thread.

Master class on snood knitting for beginners

A snood is a type of scarf that replaces two things in your wardrobe at once - a hat and a scarf. Therefore, having such a fashionable accessory, you can always remain fashionable and stylish. We knit a scarf with knitting needles for beginners, details in our MK.

Option No. 1: Snood made on circular knitting needles

Material:

• Yarn of your choice – 100 g;
• Knitting needles according to yarn size, line length 80 cm.

Description of work:

Cast on the knitting needles the required number of stitches, which must be calculated using the pre-knitted pattern. The main knitting will be knit stitches.

Purl the next row. In circular knitting, garter stitch is knitted this way. 1 row, knit, 1 row, purl.

Knit until you alternate rows until you reach the desired height.

In the last row, close the loops in any known way. This snood scarf was made using circular knitting needles.

Option No. 2: Snood knitted on straight knitting needles

The second option is a little easier to knit than the first. To make it, straight knitting needles are required, since knitting takes place in rotating rows. Garter stitch is used for the design. All rows are knitted with knit stitches only.

Description of work:

Cast on the required number of stitches on the knitting needles. Knit a row with facial loops. The edges are knitted with a purl loop.

Turn the product and continue knitting with facial loops. Original sectional dyeing of yarn will make the finished product beautiful, without any knitting tricks.

Knit the product to the desired length. Cast off the stitches of the last row. Now the narrow ends of the product need to be connected to each other. This can be done in two ways: with a hook or a needle, whichever is more convenient for you.

This is such a simple, but very fashionable accessory.

Video: Tutorial on knitting a snood for beginners

Amazing knitted scarf ideas

The variety of scarves never ceases to amaze. Let's look at several options for amazing products with diagrams and descriptions.

Snood scarf with intertwined stripes

This time too, the snood scarf with intertwined stripes amazes the imagination. Despite the fact that the design looks intricate, knitting such an accessory is not difficult. According to the description and video tutorial provided, even a not very experienced teacher can handle the product.

What you will need for work:

• Thick yarn – 150 g;
• Circular knitting needles No. 6, line length 70 cm;
• Tape measure;
• Markers;
• Extra knitting needles or pins for knitting.

Knitting density: 30 p x 24 cm.

Description of work:

If the yarn is not as thick as the knitting needles, then knit in two threads.

Cast on 30 stitches on a needle.

1st row: remove the edge stitch and knit the row completely with knit stitches, knit the edge stitch too, turn the product.

2 r: from the wrong side, also knit with facial loops.

Rows 3-6: knit with knit stitches.

Using markers, divide the product into 5 parts. It turns out there are 6 loops in each part. Now you need to knit each part separately.

We knit the edge stitch, like the other 5 knit stitches, up to the first marker, turn the work and knit it with purl stitches from the inside out. Turn. In this way, purl loops are knitted from the wrong side and knit loops are knitted on the front side. The length of the strip should be 20 cm.

Remove the finished strip onto a pin or auxiliary knitting needle.

We move on to knitting the second strip.

Attach the thread to the beginning of the second strip and knit 6 loops with knit stitches. Knit up in stockinette stitch for 20 cm.

Knit 5 identical parts.

Place all the loops on a working knitting needle, and connect the strips together with knots from the cut ends. We continue knitting from the wrong side.

We continue to knit in garter stitch for 50-60 cm.

Divide the fabric again into 5 parts of 6 loops each and repeat identical knitting of the first 5 strips.

After finishing making 20 centimeter strips, carefully remove each strip onto a separate pin. Now you need to intertwine the strips of the first part with the second in a checkerboard pattern. To do this, the first free strip must be placed under the first strip of the first part, then thrown over the second and placed under the third, thrown over the fourth and left under the heel.

Thus, it will continue to intertwine all the strips with each other.

After the weaving is completed, the loops that are on the pins must be transferred to the knitting needle. Now connect the strips together with the ends of the threads. And continue knitting the product in garter stitch for 6 rows. The first row after joining is considered zero. We close the loops.

Closing the loops:

Two stitches are knitted together, the loose one is thrown onto a working needle, and so on until the end of the row.

Fasten the thread and cut it.

Video: Detailed tutorial on knitting a snood

An effective and very charming scarf

We continue to amaze with unusual patterns of scarves that are knitted very simply, but look incredibly beautiful and unique.

Materials:

• Yarn (60% mohair, 40% acrylic in 100g/500m) – 100g;
• Knitting needles No. 4, No. 3;
• Hook 2.5mm.

Description of work:

Cast on 44 stitches on the needles. Knit 8 rows in stockinette stitch (knit row with knit stitches, purl row with purl stitches).

Row 9: knit 3, knit 16, knit 5, knit 16, knit 3, edging, turn.

10 r: edge, purl 3, 16 loops cast on a knitting needle, purl 5, purl 16, purl 3, edge turn.

Knit 8 rows in stockinette stitch and repeat rows 9 and 10. That is, make slits into the product every 8 rows.

We continue to knit the fabric to the required length.

Now you need to braid the loops on one side in the form of a braid (as shown in the figure), and secure the latter with thread.

On the other hand, leave it as slits.

The bottom can be decorated with fringe and a decorative button.

The scarf is ready.

A selection of diagrams with descriptions

Openwork blue scarf

Openwork women's snood

Warm scarf with pompoms

Beige snood knitting for beginners

When choosing clothes for the cold season, pay attention to accessories. This season's must-have item is a knitted scarf. It will become an important part of your everyday wardrobe. A scarf will not only help you create a unique look, but will also keep you warm in cold weather.

The easiest way is to buy a ready-made item in a store. But there is not always a suitable material composition, color, and even the size may not suit the demanding customer. Therefore, it is better to create a unique, inimitable thing with your own hands. In addition, such a product will be a pleasant gift for any occasion, and the manufacturing process itself will help while away the evening.

Knitting a scarf is not difficult even for a novice needlewoman.

When choosing a technique, you should remember the features of knitting and crocheting. When choosing a creative tool, pay attention to the density, relief, and structure of the future product. The quality of your product depends on this.

Features of working with knitting needles are as follows:

• It is necessary to remember about uniform tension working thread. With loops of different sizes, the item will look sloppy.
• You need to choose thicker yarn, because knitting needles hide excess thickness; even the thickest threads will make a soft scarf.
• Thin threads are worth choosing if you want to get a luxurious fluffy scarf.
• A knitted item has a front and back side.
• Knitting needles are an ideal option for relief designs.

Crochet

This technique also has its own characteristics:

• You should knit the row to the end without skipping a single loop, otherwise the edge of the scarf will come out uneven.
• When choosing a working thread, you should pay attention to its thickness. Very thick yarn is not suitable: the item will turn out rough.

Choose a scheme based on how warm you want your masterpiece to be:

• For a light filigree scarf, a pattern with a large number of so-called air loops and stitches with five crochets is suitable.
• For tighter knitting, single crochet stitches, half double crochets, single crochet stitches, “bumps”, and puffy stitches are suitable.

If the item has a double-sided pattern, then mostly smooth patterns are used.

ADVICE! If you have never tried needlework, it is worth mastering crocheting. It is easier to work with due to one working loop, whereas when working with knitting needles a very large number of them are collected. Even if you miss one loop, the pattern will be lost and the product will not have the proper appearance.

Choosing yarn and knitting needles for a scarf with patterns

Store shelves are full of countless beautiful skeins with bright labels. Yarn varies in thread thickness, twist, and composition. The most important thing is the composition.

The threads are:

• cotton;
• acrylic;
• woolen;
• mixed.

For a light, decorative scarf, cotton is suitable, but if you need a warm scarf, it is better to choose wool or mixed yarn. A wool scarf may feel itchy, while a product made from mixed fibers

soft and more pleasant to the touch. ATTENTION!

You should always buy extra yarn. Threads from different batches from the same manufacturer may differ significantly in shades.

The choice of knitting tool depends on the desired “airiness” of the item. The thicker the diameter of the knitting needles, the more voluminous the pattern will be.

• Knitting needles are made from:
• bamboo;
• plastic;
• wood;

metal For large quantity patterns suitable tool middle length

with tip. IMPORTANT!

To avoid making a mistake with the diameter, you should carefully look at the label. The manufacturer always indicates the most suitable number of knitting needles.

Varieties of patterns for knitting a scarf with knitting needles

The choice of drawings is very wide. These are double-sided and simple, smooth, embossed and lush, airy and openwork. There are many videos on the Internet on this topic, but if the information is presented in the form of text and pictures, you can always return to them, even in the absence of the Internet. Let's look at the technique of performing some of them with detailed description

(Master Class).

Simple pattern for beginners

The easiest way to knit is with an elastic band. This scarf will warm you up on cold autumn evenings; it will be thick and warm. It is very easy to knit. You will need 200 grams of yarn, knitting needles No. 5.

There are several options for this method:

This type of pattern has been very popular for scarves for several seasons. The good thing about it is that it looks the same on both sides. It's not difficult to master.

We knit a winter men's scarf with a pearl pattern

We will need 250 grams of yarn, knitting needles No. 8.

We cast on 25 loops and knit with a large pearl pattern according to the pattern. We maintain consistency. At the end we close the loops.. The peculiarity of this pattern is that you can knit both in length and in width.

First, second rows - alternate knit and purl stitches.

The third, fourth - we knit the opposite way.

Alternate knitting in two rows until the desired length is obtained.

Double-sided two-color patterns

Knit with threads of two different shades. Both sides of the product will be “right”.

Symbols for the diagram:

I – facial;

- - purl;

V – thrown over.

• Knitting stages:
• Row 0: take the thread of the first color and knit the entire row. 1st row:(we simply transfer it to another knitting needle), purl three, remove one, leave the thread behind the product, purl three, remove one, leave the thread behind the product. Knit to the end, close with an edge loop.
• Row 2: insert a thread of a different color. The first edge stitch, knit one, remove one loop, leave the thread in front of the product, three knit stitches, remove one, leave the thread in front of the product, close with the edge stitch.
• 3rd row: we knit in the same color as in the second row, one edge, continue knitting according to the pattern, we pull out one removed purl, leave the thread behind the product, knit three purls, pull out the removed loop, leave the thread behind the product. Continue to the end of the row, closing with an edge stitch.
• Rows 4 and 5 are similar to the second and third.

with tip. We change the thread color every two rows. When removing, pay attention: the thread remains on the side with the front loops.

Openwork pattern

An airy openwork scarf will be a wonderful decoration for your wardrobe. Angora or mohair yarn is perfect for this type of work.

V – thrown over.

• To complete the work, cast on the knitting needles the required number of loops and knit three wavy motifs according to the pattern.
• We knit the first eight rows like this: odd rows with knit stitches, even rows with purl stitches.
• We start the ninth row with two knit stitches, knit 2 together 3 times with a slant to the left, yo, knit, yo, knit, yo, knit, yo, knit, yo, knit, yo, knit 2 together 3 times with a slant to the right.
• We knit the tenth in a mirror image.
• From the eleventh to the sixteenth: odd - knit, even - purl.
• From the seventeenth row we repeat rows 9 – 16.

Oriental openwork pattern

To create a unique pattern, you will need 150 grams of angora yarn (skeins 50 g/240 m), knitting needles No. 3.

For a scarf 35 centimeters wide, cast on 74 loops, two of which are edge loops.

From the first row we knit according to the pattern to the required length.

Thus, starting with simple ones, studying patterns, moving on to complex knitting, you can hone your skills and create a whole collection of unique scarves.