The art that is available to everyone is decorating the Christmas tree and not only with the help of Christmas balls with your own hands. DIY Styrofoam Christmas balls What can be made from small Christmas balls

New Year's chores are pleasant, especially when they are associated with the creation of a beautiful and festive decor. There are many interior ideas that can be realized by making different themed decorations ..

Read in the article

How to make a paper Christmas ball with your own hands: corrugated paper, paper tubes, origami

If you really want to make a Christmas tree, the most suitable material is paper. Even if it is not as durable as foam blanks, it is decorative and involves many ways of transforming a flat sheet into a voluminous beautiful decoration.

Balloons for the New Year: we use corrugated paper

Creative balls for the Christmas tree and not only do it yourself from material such as corrugated paper.

The work uses 8 sheets of corrugated paper of the desired colors 25 × 50 cm in size, a template for the shape of a petal and a thread.

The accordion is unfolded slowly, sheet by sheet. The straightened accordion very quickly turns into a fluffy pompom. The thread connecting the center of the accordion should have one long end for hanging.

We twist paper tubes and make stylish balls

Paper balls for the New Year can look unusual if made from tubes. These products are almost always based on a newspaper. The sheets of newspaper should be cut into equal strips of about 30 × 5 cm. Each strip will turn into a long tube when screwed onto a long, thin knitting needle at a 45⁰ angle. The tip is greased with PVA glue, and now the tube is ready. To make a "thread" from the tubes, a narrow tip of another tube is inserted into the wider hole together with a drop of glue.

Advice! It is not necessary to paint all the tubes first. Finished balls can be dipped in paint or sprayed from a spray can.

Paper balls in different techniques

Balls are made from strips of paper, from the same patterns, unusual elements, and even from twisted bags. For work, you need scissors, PVA glue and a thread for hanging.

Origami balls

Origami Christmas paper balls require composure and patience. Elements are not always perfectly straight the first time. Therefore, the work is performed slowly, ironing each fold with a ruler.

How to make DIY felt balls: flowers and appliques

How to make a Christmas ball with your own hands? We are purchasing bright and obedient felt!

Balls with felt flowers

Using foam blanks, tailor's pins, scissors and felt, it's easy to make beautiful balls with flowers. The work is time consuming in the sense that it will be necessary to make a large number of identical small templates.

Felt and foam balls

It's great that ready-made foam blanks can be purchased without any problems! There are countless ways to decorate them, let's dwell on felt decoration.

Cut out 6 almond-shaped petals from the wind. In order not to be mistaken, first we cut out one of the paper, attach it to the ball and correct its shape. And then you can cut the felt.

How to make a Christmas ball out of textiles

Any fabric, scraps, ribbons, embroidery - all this has been successfully used for a long time by various craftswomen to create New Year's decorations. It is not at all necessary to be a high-class tailor to make textile beauty with your own hands.

Balloons for the new year: satin ribbons

There are two ways to make a satin ribbon ball. In the first case, wider belts are used, and in the second, narrow ones.

They work differently with narrow ribbons: they select a vertex on a foam ball and mark it with a marker, encircling a small circle. There, closely spaced tailor's pins are placed in one row. They do the same from below. Now fix the tip of the tape with hot glue and begin to pull the tape up and down through each pin. Having wrapped the whole ball in this way, fix the remaining tip of the tape.

Patch balls using kinusaiga technique

The art of working with foam and scraps of fabric is surprising and inspiring. Sewing without sewing is confusing at first. But, having understood, it becomes clear what the speech is about.
The principle of the kinusaiga technique is that the lines that make up the pattern are drawn on the foam. Then each line is cut with a sharp knife, scissors, cutter.

Balls with embroidery

Embroidery is a noble cause and deserves its place on the branches of the New Year tree. First, a drawing is selected, according to which the work will be embroidered. The pattern is embroidered on an element of the future decoration.

If the muse has already visited, then you should not let her go: even if there is nothing special about the decor in the house, there will always be a skein of thread, pasta and buttons.

Buttons and pasta

How to make Christmas balls from buttons? We take any base ball, acquire a thermo-gun with a set of rods, a bunch of beautiful or not very buttons, and don't forget about inspiration.

With pasta, the principle of action is slightly different. Consider a photo of making pasta decoration.

Illustration	Description of action
	Small stars will look elegant on the toy. In addition to pasta, you need a bowl with PVA glue, a blank ball, decorative elements. You can take satin ribbons in two colors. They need a soldering iron and a leaf template. For the top of the ball, buy ready-made devices at handicraft stores.
	We cover the workpiece with glue so that the thick sticky mass does not flow down. This is only possible when using high quality glue.
	With tweezers we put each pasta element on the glue. We are waiting for the complete drying of the product.
	We paint the ball and dry it.
	The leaves are made from ribbons: first, with a soldering iron, they circle the outline of the template on a white ribbon.
	Then they make the outer and inner contours on a red tape and glue them with a soldering iron.
	The leaves are glued with hot glue
	To top off the work, attach the holder to the top.

Threads for a volumetric ball

It works the first time if you follow the instructions. What do you need:

• threads: woolen, iris, jute, twine;
• PVA glue;
• hand cream.

Now let's move on to describing the process.

Illustration	Description of action
	Pour glue into a bowl.
	Dip a skein of thread in the glue and leave it there for half an hour. During this time, we will inflate the required number of balloons of the desired size.
	We tie each ball and lightly coat it with cream. We begin to wrap the ball, trying not to lay the thread randomly.
	We wrap, sparing no thread! We leave everything to dry completely, pierce and remove the ball.

Interesting ways to easily decorate balls on a Christmas tree

For many, Christmas decorations from balls are preferable. Therefore, we will consider simple ways to decorate different round blanks.

We use children's fingers

Any ball can be decorated with acrylic paints. For this you only need paints, a blank and fingers!

Children really like crafts where you need to work with your fingers, not brushes.

How to do it yourself decoupage balloons for the New Year

If you want an amazing and wonderful world on the tree, then get ready to buy acrylic primer paint, beautiful napkins, PVA glue, varnish and brushes. If someone wants to make a Christmas ball with snow, then you can make an imitation of a snow cover with salt and glue.

First, they clean the surface of the toy if any irregularities are suddenly found on it. For this, sandpaper zero is suitable. Then the workpiece needs to be primed.

Once the layer is dry, you can start the creative part of the process. The whole napkin is not needed, we look after the desired image and carefully pull it out with our hands. Then a piece with a picture is applied to the ball and very carefully begin to smooth it with a brush with PVA glue. This is a crucial moment - haste will damage the napkin.

To create a New Year's ball from fabric you will need:

Foam ball with a diameter of about 7 centimeters;
- colored synthetic fabric;
- a lot of safety pins;
- a thread of white beads;
- scissors, thermal gun.

Christmas balls made of fabric step by step:

Cut the fabric into squares with sides about 5 centimeters. For a special texture, it is advisable to use squares of two shades (photo 2).

To simplify your workflow, draw median lines directly on the styrofoam ball. In total, you need to make eight lines located to each other at an angle of 45 degrees (photo 3).

Take a square of fabric and fold it in half, then in half again. Attach the square to the axis of the intersection of the median, pin with a safety pin (photo 4).

Also, fold the squares of a different color into four parts and each pin the balls crosswise to the surface (through one median) (photo 5).

This is followed by a layer of squares that need to be pinned in the same way as the first, but stepping back a little from the center and closing the gaps (missing medians) (photo 6). Continue pinning the fabric squares to the balloon until you cover exactly half of the balloon's surface (photo 7). It is advisable to make the other half a single color (photo 8).

On the back side of the surface of the ball, glue a string of beads using hot glue, twist this element in a spiral (photo 9). During work, a cobweb of glue may remain on the beads - this is not scary. After a few minutes, when the glue is completely dry, the cobweb can be easily removed (photo 10).

The fabric Christmas ball is ready! As you can see, there is nothing difficult in this technique. With a great desire and perseverance, you will receive an originally decorated Christmas tree.
Author of MK: Madame Gritsatsuyeva (Margarita)

New Year's patchwork ball.

To make a New Year's patchwork ball, you will need:

Scraps of fabric;
- blank foam ball (any size);
- pins;
- felt-tip pen / pen;
- tape measure / centimeter;
- glue stick;
- wooden skewer;
- model knife, compasses, scissors;
- lace, ribbon, etc. for decorating the ball.

New Year's patchwork ball step by step:

Take a foam ball as a basis, in this case 60 mm in diameter. Using a centimeter, mark the center line on the ball, halve the circumference, mark with pins - this will be the lower and upper points of the ball (photo 1). Draw another line through these points using a centimeter, dividing the ball into four uniform parts (photo 2). Similarly, halve each bead of the ball, so you divide the bead into eight equal beads (Photo 3).

Now draw a cross line down the center of the ball. To do this, divide each line from the bottom and top points of the ball (where it was marked with pins) in half, and draw a transverse line along the marks (photo 4-5).

Next, take a compass, set it first at the top point of the ball, draw a circle, then do the same on the other side (photo 6). As a result, you will receive a blank, as in photo 7. Make cuts along all the lines (which were marked) with a clerical knife approximately 1-2 cm deep (photo 8).

You will need two templates, one in the shape of a triangle and the other in the shape of a trapezoid. Draw the templates on the paper, adding an allowance of about 7-8 mm. We advise you not to rush and not cut out all the elements at once. First, try to cut out one piece, and fix it on the ball. It is likely that you will need to adjust the template, increase or decrease the stock.

In this case, only two types of fabric were used, therefore, 8 triangles and trapezoids were cut from a plain red fabric and the same number of elements from fabric with branches (photo 9). To fix small elements, use a glue stick, which fixes the fabric parts and prevents them from moving (photo 10).

Then, using a wooden skewer, begin to carefully tuck the excess fabric into the slots, paying due attention to the corners. For convenience, use a large, blunt needle. For large items, a sandwich knife with a rounded tip is suitable (photo 11-12).

By analogy, fill in all the parts (photo 13). And after a couple of hours admire the result (photo 14-15). Now it remains only to decorate the ball with ribbons, cords, beads, bells, pom-poms, bead hats (photo 16).

Christmas balls made of threads.

To create Christmas balls from threads, you will need:

Air balloons
- dense decorative threads or thin multi-colored cords
- PVA glue + container for glue, in which you will need to make holes
- needle, scissors

Christmas balls made of thread step by step:

Take a balloon and inflate it to a suitable size. Tie up. You can wrinkle the ball a little in your hands to give it a more rounded shape.
Thread the decorative thread through the needle and poke through the empty plastic container for glue. It is better to do this closer to the bottom of the container.

When the thread passes through, pour PVA glue into the container, which will take quite a lot. It is not advisable to dilute it with water.

If using a thin ribbon, you can soak it completely in the glue (Figure 3).

Pull the thread through the container with PVA, saturating it entirely with glue, and wind it around the base ball. When winding the thread, the ball must be turned frequently. At the same time, do not forget that the balloon will need to be removed in the future, so leave a little space in the area of ​​the balloon tie.

When the desired tightness of the ball is achieved, cut the thread, leaving a small tail to create a loop (for suspension).

Next, the ball must be left to dry completely for 1-2 days or dried with a hairdryer for about 5-10 minutes. After the glue is completely dry, pierce the balloon with a needle and carefully remove it. It is more convenient to do this through the place of its tie. Make a loop from the remaining tail of the thread, tie it to the ball.

Decorate the resulting ball as you see fit. You can paint it, trim it with sparkles and sequins, or leave it without decor.
The ball is ready!

Christmas ball made of fabric

To create these Christmas balls, you will need:

Styrofoam ball with a diameter of about 10 cm
- tailor's needles with a metal cap
- three types of fabrics (three colors).

The process of creating Christmas balls from fabric:

First thing you need to do is cut a lot of fabric squares. If your ball will be 10 cm in diameter, then cut the fabric into squares with sides 3 inches. Make 8 squares from one fabric and 16 squares each from 2 other fabrics.

You can also use two small pieces of the first type of fabric so that the foam ball does not show through the first layers. First, we will make one half of the ball.

Pin one of the 2 fabric squares to the center of the ball, it may bulge a little, but in any case it will be completely covered by the next layer (Figure 2).

Then take one square of the first material and fold it 4 times to determine its center (Figure 3). You need to stick a pin into the center of the square from the inside out (Figure 4). Stick a pin with a cloth square into the foam ball (Figure 5). The fabric must again be folded in two, pinning the corners (Figure 5).

You need to pin three more fabric squares (first material) to the ball. The result should be a completely closed fabric tip (Figure 6).

Take squares from the second cloth and start pricking them onto the ball (Figure 7).

Start with 4 squares, which are like a continuation of the previous layer. Make the distance between the layers as desired. In this case, it is about 1 cm. Use something like a template to keep the same distance for all pieces of fabric.

Attach four more fabric squares between them, as in Figure 9-10.

You can stop at two layers or make a third layer by analogy with the previous one (Figure 12).

Next, the ball must be turned over and the above steps must be repeated with the second half of the ball. However, when placing pieces of fabric on the second side of the ball, the first half must be taken into account, but 100% compliance is not necessary, since the joint will be covered with fabric.

So, the excess material at the junction of 2 sides can be cut off. Then you can close the joint with the material of the second layer, decorate with an organza ribbon. Pin one end of the tape and sew on the other.

You can also make a bow from a ribbon, for which the ball can be hung on a Christmas tree.
Glue or sew on as desired.

Ball made of fabric using artichoke technique. Master Class.

An excellent master class on creating a completely textile ball with your own hands from scratch.

To create a fabric ball using the artichoke technique, you will need:

Base fabric;
- template paper + pencil;
- needle + thread, sewing machine;
- stuffing (sintepon / cotton wool).

To decorate a fabric ball:

There are two red squares on the lining, 8 beige squares measuring 5 * 5 cm, 16 squares of the same size, but of a different color (in this case with green stars), 16 squares of the third color.
- beads for decoration.

Artichoke fabric ball step by step:

1. Creation of a tissue ball - the basis.

Prepare a pattern out of paper (Figure 1). Transfer to the wrong side of the fabric (Figure 2). You will need to create 4 petals. Cut out, remember to leave a seam allowance (Figure 3). Sweep the petals together in pairs (Figure 4-5).

Sew on a typewriter on one side (Figure 6). As a result, you will get "pockets", as in Figure 7. Fold them together with the front side (Figure 8-9).

Sweep or pin off. Then we grind (Figure 10-11). Leave a hole on one edge of each petal through which the future ball will be turned inside out and stuffed (Figure 12-13).

Fill a ball with filler, and then sew a blind seam (Figure 14-15). As a result, you will get a ball, as in Fig. 16.

2. Ball decoration:

Take all the squares for decoration (besides those for the lining), fold in half and iron (Figure 18).

Lining squares - place in the middle of the ball, and pin with pins so that they do not fidget (Figure 19).

Then take the ironed beige squares (rectangles) and fold them into triangles (Figure 20-21).

Place such a triangle in the middle of the future fabric ball, as shown in Figure 22 and pin it with pins.

Pin the 4th triangles and get a blank, as in fig 23. Start sewing the corners of the triangles. Sew the opposite corners of some triangles (Figure 24) and then others (Figure 25).

Sew on a beauty bead at the junction (Figure 26). Withdraw the needle under the triangles as shown in Figure 27. And carefully sew the triangles along the edge to the base of the ball (Figure 28).

As a result, you will get, as in Fig. 29. Proceed by analogy with the rectangles with asterisks. Fold them into triangles first, then place them on the ball and pin them. Arrange the triangles in the proper order (Figure 30-31). Sew in the same way as in the previous steps (Fig. 32-34).

Apply triangles of the third color (Figure 35-38).

As a result, you will get just such a half of the ball (Fig. 39), by analogy, make the second one.

After that, cut the strips 5 * 10 cm in size and fold them, as in Fig. 41. Iron everything. Attach to the ball and pin with pins (Figure 42). This must be done in order to decorate the sides of the ball.

Cut the strips 5 * 10 cm long again and fold them as in Figure 43-44.

Place these triangles on top of the previous ones, as in Figure 45. Overlap (Figure 46). Scalle everything with pins (Figure 47) and sew on (Figure 49-50).

The ball made of fabric using the artichoke technique is ready!
Thanks to the author Natalia Semenova for the excellent MK.

Bump using the kanzashi technique. Master Class.

To create a bump using the kanzashi technique, you will need:

Satin ribbon about 2.5 cm wide (two colors);
- ball-base for ping-pong;
- thread, monofilament or thin line;
- thermal gun;
- tweezers;
- a bead or attachment to Christmas tree decorations.

Kanzashi bump step by step:

Initially, cut squares from ribbons of two colors with a side of 2.5 cm and fold them in half into triangular modules (photo

1). One cloth square needs to be fixed on the ping-pong ball, having well glued the center and edges (photo 2). The base ball must be placed on a small jar, for example, from under the cream - this way it will not roll on the working surface.

Fold the triangular modules in half again (photo 3). Then make the first row - glue four modules at once on the surface of the ball so that it looks like a square (photo 4). Subsequent rows should consist of 2 parts, four modules each.

Glue the second row of modules. Glue the first part of four modules between the details of the first row (photo 5). And glue the second part between the parts of the first part so that the lower part of both parts of the second row is on the same level (photo 6).

Also glue all subsequent rows, alternating the colors of the modules (photo 7-8).

After gluing the penultimate row of modules, glue a piece of satin ribbon, hiding the surface of the ball (as well as at the beginning of the working process) (photo 9-10). Next, glue the last row of modules (photo 11-12).

The almost finished kanzashi cone needs to be decorated, starting from the top of the Christmas tree toy. For this, collect a satin ribbon on a thread and pull it off, forming such a bow (photo 13). Hide the middle of the bow by gluing the holder for the Christmas balls to it (photo 14).

A pine cone using the kanzashi technique is ready to decorate the New Year tree.

Ball on a Christmas tree using the kanzashi technique.

To make a ball on a Christmas tree, you will need:

Satin ribbon 2.5 centimeters wide in the main color (about 2.7 m) + ribbon for spirals (about 1.1 m);
- ping pong ball;
- wire, awl;
- decor: sequins, beads, pin, string for hanging;
- thermal gun and all other tools for kanzashstroyeniye.

Ball on a Christmas tree using quillig technique step by step:

The base will remain inside the Christmas tree, so inexpensive ping-pong balls, which are very light, are best suited. The ball tolerates hot glue well, so there is no need to wrap anything and you can glue the "petals" directly onto it.

You will also need to securely attach the hanging strap. Of course, you can just glue the bead, but you can also fix it more securely, for which roughly mark the middle on both sides and pierce it through with an awl (photo 1). Then fix the wire with the fixed bead (photo 2). Try on the top (photo 3).

Glue on a sequin or other decoration, form a top (photo 5). And start glueing the petals.

1st row: 2 white, 2 red, 2 white, 2 red
2nd row: 1 white, 3 red, 1 white, 3 red
3rd row: increase, glue 2 petals. 2 white, 6 red, 2 white, 6 red

Continue in the same spirit without increasing the amount.

In photo 10, it is noticeable that the petals are beginning to "crowd" too much, it is clearly necessary to reduce to the original 8 petals. And the last row is also 8. It took 144 petals to make this ball.

You can, of course, take not 8, but 10 petals in the first row, and then the ball will turn out to be more magnificent, since the petals will be attached in a more dense way.

The ball on the Christmas tree using the quillig technique is ready!

New Year's toys from sequins and beads.

To make Christmas toys, you will need:

Foam ball (about 6 cm in diameter);
- sequins and beads;
- needles with a pearl.

Christmas toys made of sequins and beads step by step:

Sequins on a foam base can be fastened in a chaotic manner using accessories of various colors. So, take a sequin and put it on your pearl needle. You can also fix several sequins of different shapes at once. For example, first put a blue sequin in the shape of a snowflake on the needle, and blue and / or purple on top.

Begin to gently stick the needle into the foam ball, trying to fill its entire surface without gaps. You can go one sequin over another, but in this case, you need to make sure that all sequins are located at an equal distance from each other.

Christmas toys made of sequins and beads are ready!

DIY unbreakable Christmas balls

To create shatterproof toys you will need:

Floss threads of different colors + needle
- a foam ball, you can cut it yourself from foam or make it from foil, newspapers, tightly tied with threads. You can use different materials, just be careful not to make the balls too heavy.
- all kinds of decor (you can even use ready-made New Year's applications)

Unbreakable Christmas balls step by step:

The first things you need to do is wrap a round workpiece with threads, for which take it and start winding it crosswise several times. You need to rewind tightly enough. Finally, lock the end of the thread to prevent unraveling.

Now we start decorating the ball (everything here will depend on your imagination and the availability of decorations). If you know how and love to embroider, then you can embroider all kinds of New Year's ornament. You can also sew a suitable applique to the toy, decorate with beads, beads, fabric flowers.

In the end, do not forget to make a holder for the finished Christmas tree toy in the form of a rope, for which the ball will be hung on the tree.

Sweet Christmas balls. Master Class.

To create Christmas balls, you will need:

Chocolate glaze;
- Balloons;
- kandurin;
- soft wide brush;
- baking paper;
- mastic / marzipan;
- wire;
- colander.

Sweet Christmas balls step by step:

Fill a balloon with water, tie and send to the freezer for 24 hours. Melt the chocolate frosting and fill the baking paper bun with it. Remove the ball from the freezer and remove it from the ice ball formed from the water in the freezer.

Place the ice ball on a piece of baking paper and paint the ball on all sides with chocolate icing. Any glaze that accidentally fell not on the surface of the ball, but on the baking paper, after hardening, remove from the paper and use again.

While the ice is melting and flowing through the holes in the chocolate painting, prepare the top for the balls. Twist a loop out of the wire, and blind the top from mastic or marzipan. Cover everything with silver / gold canandurine. Combine the tip with the ball using melted chocolate.

Note: For pearlescent and silver balls, we recommend using white chocolate icing.

New Year's openwork paper balls.

We suggest you make such bright, openwork Christmas balls for the New Year, which will perfectly fit into the interior or help you decorate the New Year tree.

To create openwork Christmas balls, you will need:

A4 sheets of thick colored paper;
- knife for artistic cutting;
- a needle and thread;
- glue, scissors;
- beads for decoration;
- template (presented at the end of the article).

The process of creating Christmas balls from paper:

First thing you need to do is print the templates on paper. If desired, you can resize the template proportionally.

Next, start cutting out the patterns using your breadboard knife. Part of the paper with a pattern can be covered with a sheet of paper in order not to accidentally overwrite the circuit during operation (Figure 2-4). After cutting the pattern, start cutting the sweep of the ball along the contour (Figure 5).

Now you need to give each part of the cut out scheme a rounded shape, for which you can use a round pencil (Figure 6-7).

Then punch holes on both sides at the end of each petal (Figure 8).

Roll the cut paper into a ball and glue the edges of the reamer (Figure 9).

It remains to make a loop from the thread - and the New Year's ball is ready for hanging.

Author of MK: Olga Kachurovskaya

Christmas ball made of fabric and foam.

To create these Christmas balls, you will need:

Foam ball with a diameter of about 7-8 cm;
- satin fabric or other at will;
- braid or ribbon, decorative beads;
- glue pistols;
- scissors, knife.

Christmas ball made of fabric and foam step by step:

First, mark the ball. To do this, take a thread, wrap it around and tighten it so that a small groove forms on the ball for further work. The ball can be divided into any number of parts - 4, 6, 8, etc. In this case, it was divided into 4 parts. You can draw the lines with a pencil, for convenience.

Then, using a knife / scalpel, make cuts along the marked lines, with a depth of about 7-8 mm. This should be done quite carefully so that the ball does not disintegrate in the hands, especially with its small diameter (less than 6 cm).

Cut a petal out of the fabric that is larger than the wedges on the foam ball and start tucking the edge of the satin fabric inward in a neat way. Insert to a depth of about 3-5 mm first. After going around the entire contour, cut off the excess fabric, and hide the edges. Thus, cover the entire surface of the ball wedge by wedge.

Then start decorating. Tuck the ends of the beads into the inside of the ball. Secure the loop with drops of hot glue. From glue of the "Moment" type, the foam can begin to melt. Pull the beads tightly so that they do not dangle when finished. And also with the second half of the beads.

Cut the eyelet to the desired length, drip glue, insert the ponytails, press down.

The New Year's ball made of fabric and foam is ready!

You can tie a bow, draw snowflakes, or glue on sequins!

Such a ball will be a great gift for the New Year!

Decoupage of Christmas balls.

To decoupage Christmas balls, you will need:

Plastic balls with a diameter of 8 cm;
- three-layer napkins with a pattern;
- acrylic paints of different colors: white, blue, yellow + brush;
- PVA glue;
- acrylic lacquer;
- a little semolina;
- sparkles;
- contours for ceramics and glass;
- a piece of a sponge for washing dishes;
- plastic board for modeling.

Decoupage Christmas balls step by step:

You can purchase simple balls without a pattern in any color (gold, purple, silver, matte or glossy.

Take a ball and a piece of sponge, put a little white paint on the board, blot it with a sponge in the paint and apply it with dotted movements on the ball. Make sure that there is always paint on the sponge, then you will get the effect of a snow deposit on the ball.

Paint in this way, hang all the balls to dry for about an hour.

In the meantime, prepare napkins. To do this, separate the upper bright layer from the white one. Cut out the design carefully.

Dilute PVA in half with water and glue the drawing to the ball. Begin gluing from the center of the pattern, gradually moving towards the edges. Do this action with all motives.

For the balls with bunnies, make a light yellow paint and apply it with “banging” movements around the motif on a white background.

After the paint is dry, cover the ball with varnish.

Next, we will create a winter effect, for which take a small amount of white paint and mix it with semolina until you get a thick porridge. Using a thin brush, apply to the ball in the places where we will have snow.

Let dry. Then take varnish and small silver sequins, and cover the semblance of "snow" first with varnish, and then apply sequins.

Decoupage of Christmas balls is over!
Author of MK: Slastina Elena

Woolen Christmas ball.

In this master class, you will see the process of making New Year's wool balls. The process is quite simple and does not require you to master the skills of felting from wool.

At first glance, it may seem that it is very difficult to learn how to felted felt toys. But such beautiful things can be done without certain skills and special tools. However, in this case, you still need to purchase wool from a needlewoman store, and then you can make exactly the same woolen Christmas ball. Children will be delighted with such balls - they can be removed from the branches and played with snowballs right in the apartment!

To make woolen Christmas balls you will need:

Felting wool of different colors;
- synthetic winterizer (other filler ");
- sewing needle + thread, scissors;
- pins with pearls;
- nylon stocking;
- optional decor: beads, sequins.

Woolen Christmas ball step by step:

Form a ball of padding polyester, tie it with threads so that it keeps its shape. Then evenly wrap a padding polyester blank with colored wool for felting, fix it with a felting needle or ordinary pins.

After you completely wrap the ball with wool, put it in a nylon stocking and tie a knot. All you need is to wash the workpiece in hot water (in a washing machine) on the "boil mode" and squeeze it out at maximum speed. Then remove the ball from the stocking and dry it.

Start decorating - mark the future drawing with pins. Decorate the ball with woolen threads, securing them with pins with pearls, thereby laying out the desired pattern. Fix the resulting decor using sewing threads, while decorating the ball with beads and sequins at the points where the pattern is fixed.

Attach a loop of beads on top of the Christmas ball and you can hang it on the Christmas tree.
Happy Holidays!

Painting a glass ball on a Christmas tree.

To paint the ball you need:

Glass bowl;
- contour for glass and ceramics;
- lacquer-based stained glass paint (here from Hobby Line);
- paint to create pearls (here from Viva Dekor);
- thin synthetic round brushes number 1 or 2 (ideally, each color has its own brush);
- the most inexpensive nail polish remover (acetone);
- cotton pads, rag.

Painting a glass ball on a Christmas tree step by step:

First, think about what you will represent on the ball. Here, lace elements were used as inspiration (photo 2). Draw with a silver outline. Previously, you can draw a schematic drawing using a washable marker and make sure that the outline is located next to the line, and not on it. During painting, the ball can be put on a mug or glass - this way it will be fixed and will not turn over (photo 3). Since the ball is round in shape, first paint one part and let it dry (so you do not happen to overlap the drawing in the process) (photo 4).

After you have painted the entire surface of the ball and let it dry completely, proceed directly to painting. White and blue stained glass lacquer paints were used for this ball. For the third color, they were mixed together in the lid (photo 5). Gently drip paint onto a section of the drawing and stretch to the edges. The advantages of varnish paints include fast drying and the complete absence of air bubbles on the surface, which is quite important when painting small elements (photo 6). Let the paint dry before starting to paint the adjacent element so that the colors do not mix (photo 7).

Take your time to paint the entire surface of the glass ball. Let it dry by hanging it somewhere, just make sure that the paint does not flow (photo 9). Decorate the balloon with pearl paint (Pic 10). Place droplets of different sizes wherever you like. Let dry.

Clean paint brushes with nail polish remover and cotton pads. By changing the color of the outline and paints, you can paint a couple more balls.
Author MK: Hamster Paradise (homorai)

Decorating a Christmas ball with polymer clay.

To create such a ball, you will need:

Clay of two colors (in this case red + white);
- glass ball;
- two 18-inch strips about 2x4 long;
- extruder;
- waxed paper;
- glue;
- rope / ribbon for suspension.

We decorate the Christmas ball with polymer clay step by step:

Drill a hole at the top of the bar, which should be slightly larger, of your extruder. Fasten the two planks with a connecting loop. Next, you need to close the planks and create a shallow hole in the lower plank in the same place. This will prevent the piston from slipping. To use this design, simply insert the clay extruder into it.

Then put together two pieces of clay of different colors and wrap them in waxed paper, the ends of which should be slightly longer than the "sausages" (Figure 8-9).

Now, using the extruder, you need to extrude the two-color stripes of clay (Figure 10). Then clean the piston from the extruder and proceed to the next step (Figure 11).

Take one of the thin resulting strips and lay it out on your work surface. Cut one end and start twisting into a spiral (Figure 13).

Then place the twisted spiral of clay in the lower center of the glass ball and gradually begin to wind this strip around the ball in a spiral (Figure 13-14). Use glue to hold the clay to the surface of the ball. When you have covered half of the ball, carefully cut off the end of the "sausage".

It is easier to work with clay not raw, so hang the ball on a wooden stick or toothpick and place the ball in a glass container and bake in the oven for 30 minutes at 265F. After the ball has cooled, remove its iron top-mount and continue wrapping it with clay.

Continue until you completely cover the surface of the ball with clay. Try to connect the "clay sausage" as clearly and evenly as possible. Then replace the iron ball mount and bake for 30 minutes.

Decorate the finished ball with a beautiful bow!

Before the New Year holidays, shop counters amaze with a scattering of bright Christmas tree decorations. Therefore, you can choose a decor for a Christmas tree in absolutely any style and for a different budget. Christmas balls delight the eye and delight with original solutions.

And only true connoisseurs of exclusiveness pass by, because they know that it is better to create a real festive decoration for the most magical holiday with your own hands. Only then do we get unique toys that convey the warmth of hands, creativity and respect for tradition.

Variety of material, wealth of ideas

Working on Christmas balls is a pleasant surprise from the very beginning. To implement the most daring options, not so much money will be required. And almost all technologies allow for the active participation of all family members, including the youngest. They can be entrusted not only with painting or sprinkling - let them make their own, baby balls. These masterpieces will be the beginning of a family collection.

The custom of decorating the house, and later the New Year tree, came to us from antiquity. Celebrating the change of times, branches of evergreens were hung on the walls as a symbol of the continuity of life. Gifts to good spirits were placed on them. Most often they were. From this tradition, the rounded shape of the most popular decoration of the New Year tree remained. Only other materials were used - glass, porcelain, wood,. Then various polymers were used, which made it possible to obtain shatterproof balls. Many factories churned out inexpensive and colorful balloons.

Interesting! But at all times there were special Christmas tree decorations. Those that were made in a single version are handmade. We are not talking about designer gizmos, expensive and luxurious. Much more expensive are often not the most perfect toys, but made by the united efforts of the whole family or prepared as a gift to friends.

There are many ideas for implementing such an idea. You can pick up the technology that is available, or you can swing at something more complex and impressive. There are plenty to choose from! Christmas balls are made from:

• thread;
• paper;
• wool;
• foam;
• fabrics;
• satin threads;
• silk and polymer laces;
• chocolate and more.

Passionate craftsmen are ready to work with decoupage, artichoke, shabby chic or origami ideas. Several ideas are worth exploring in more detail.

Styrofoam, fabric and fantasy

Such balls are attractive because all the scraps of fabric that can be found in the house will be used. The kimekomi technique is somewhat reminiscent of patchwork, or patchwork. If you plan to make balls as a gift, you can come up with several patterns that overlap in color and texture, then it is better to look for a suitable fabric already in the store.

A foam ball is taken as a basis. The larger it is, the easier it is to work; for the first experiment, a ball of at least 8 cm in diameter is better suited. These balls are sold in art stores. You will also need:

• fabric of several patterns and textures. It is good if at least one flap is brocade or velvet;
• decorative braid;
• English sewing pins;
• a fabric ripper or utility knife;
• skewers or nail scissors;
• decorative elements (beads, sequins, buttons, etc.).

Foam blanks are solid or with ready-made grooves. The smooth ball will have to be marked with a marker or rubber bands, after which the slots are made with a clerical knife. Cutting depth up to 7 mm. Beginners are unlikely to aim at a complex drawing, a simple division "into slices" is enough. The incisions are slightly widened and compacted with a stripper, with its blunt side.

Pieces of tissue are cut out slightly more than the resulting segments. In order not to be mistaken, it is better to prick the fabric directly onto the ball with needles and cut it off with an allowance with manicure scissors. Then the edges of the flap are carefully tucked into the incision, holding it with your finger. The more accurately this stage is performed, the more magnificent the foam ball will be with your own hands, not even everyone will understand that it was not bought in the store. The decor completes the work. The slots are masked with braid or a thin shiny cord, beads or sequins are sewn on, charming bows are made of lace.

A much easier way is to use sequins and bead-headed tailor's pins. It is enough to place a shiny circle on each pin and stick it into the ball. We place the pins close to each other, chaotically, until all the foam is hidden under the sequins. Some pins can be additionally decorated with long bugles, turning the ball into a kind of hedgehog.

Idea! Styrofoam can be beautifully wrapped with braid or cord. The coils are glued from the top, close to each other, then decorated with beads or sequins.

Well, the easiest option is to glue the ball with buttons or paint it. Entrust this to children and admire the result. To add a New Year's flavor, you can apply mother-of-pearl or sparkles.

Artichoke is not just a vegetable

This technique is becoming more and more popular. It got its name for its obvious resemblance to an artichoke. The work requires a fabric or braid, a base (foam blanks or ping-pong balls). Cut the fabric or braid into squares. One is glued to the base. The following pieces are glued in layers, gradually closing the base, placing the elements in a checkerboard pattern. In this case, the pieces are glued or folded triangles, or rolled in the form of a cone (petal). Transparent dewdrops look very impressive on the "petals".

The finer the elements, the more luxurious the final product is. The top is decorated with or beads. The step-by-step instructions are quite simple, they can be easily found on the pages of the thematic portals for needlework and decor.

Old becomes vintage

There are probably old glass balls in the box with Christmas decorations. They are no longer so elegant, with scratches or even cracks. This is ideal for decoupage. It is not difficult to choose a picture on the topic, since there are a lot of postcards or napkins with New Year's ornaments. Now you need to prepare glue, brushes, glitter, paints.

Old balls are cleaned with sandpaper and acrylic primer is applied. It is more convenient to do this with a sponge: this creates an interesting textured layer. Remove the eyelet and put the ball on the pencil to make it easier to work. Separate the napkins by removing the patterned layer. The selected fragment of the picture is glued to the ball. The rest of the space is painted over with paint that matches the color. After drying, the ball is covered with a layer of varnish. Then New Year's notes are added. To do this, PVA glue is mixed with semolina and a brush, "drifts" or snowflakes are drawn. After drying, all that remains is to insert the fastening loop into place.

Decoupage of Christmas balls in vintage style is easy to work with, but its advantage is that the pictures can be selected specifically - cute bunnies and kittens for children, travel photos for friends, beautiful landscapes for nature lovers. These gifts are much more soul-stirring than the most luxurious store items. It is also a great idea for a corporate gift, because you can make a balloon with a company logo. Colleagues will also like the idea of ​​their portraits on Christmas balls next to the brand name. The portraits and logo are pre-printed on a color printer.

Thread, wool, paper ... and a little mischief

PVA glue, threads and a balloon are all you need for such a decoration. The ball is inflated, coated with glue, the threads have chaotic turns. Then the rubber base is blown off, and a nice ball of threads is left, which can be decorated with pearls, beads, bows.

Foam balls are also wrapped with threads, complementing the decoration with decorative elements. But in this case, the turns are placed without gaps, achieving this by winding in several layers.

Those who are familiar with the felting technique can be offered to make an original ball. They can even be played, and felting skills are not required. A foam ball is taken as a basis, on which wool is strengthened with a felting needle. The whole structure is hidden in a stocking and ... put into a washing machine in boiling mode. After the balls are taken out, dried and decorated to your liking. If such a ball is supposed to be given to children, you can simply use multi-colored wool.

Paper provides a huge amount of creativity. These can be openwork paper balls (they are cut out according to patterns in the form of a garland of petals, which are slightly twisted on a stick and pulled together by the tops below and above).

Christmas balls glued from many cut out cones or bells look no less original. You can fold the sheet according to the origami scheme, however, the ball is already faceted. And if you ask the children to cut out a mountain of snowflakes or flowers, then you can attach them to the foam base with pins and beads.

Attention! There is another way to make an unbreakable Christmas ball out of paper, and even newspapers are suitable for this.

The paper is cut into thin strips, which are twisted into flagella. The harnesses can be glued onto the foam base. This is done in a spiral, intertwining the bundles like willow twigs in a basket, or by arranging them vertically or horizontally. Then such balls are decorated with pictures, decor, lace.

As the saying goes, "at the request of the workers" I am posting a master class on making balloons with a photo.

girls, I tell you how I did it. I hope you will have your own ideas (I like to be an inspiration)))))) for the ball we need

A blank of a plastic ball (for Lipetsk, I also bought the store "your hobi" I have a size of 10 cm in diameter, it cost 75 r, but they also have a smaller size)

Glue (I have "the moment the crystal is TRANSPARENT" (it is important, when you dry it you cannot see it)

Ribbon for framing

You can hang a ribbon for later

Fishing line (you can use threads in the color of the ribbon)

Nail polish

First of all, I painted the part of the ball that is INSERTED from the inside. for this, I poured the nail polish straight into the half and twisted it so that it spreads evenly

At the same time, the varnish slightly melted the plastic and got a very cool effect. I let it all dry well. in the end it turned out like this half

while it was drying, I cut out the photo along the contour of the other half (I did a little more, a couple of mm, so that later it was more convenient to glue)

when the painted half of the ball dried out, I carefully smeared its edge with glue

and actually not him glued the photo. then I “forgot” about her for at least half an hour, so that everything would stick well

the edges that I left for the reserve were neatly cut off with scissors (so that it was completely "zero"). for this it is probably more convenient to use a clerical knife, but in the absence of it, I coped with scissors).

in fact, when everything was cut off, I put on the other half.

in principle, the ball is already ready. but I also wanted to decorate it. so it's up to the tape. I measured the length necessary for the tape (with a margin), passed it through the existing hole on the ball, but did not tighten it yet. so that it was fixed in place, I greased the edges of the ball at the joint with glue and actually glued the tape in tension.

After that, I tied the ends of the ribbon into a knot, cut off what was unnecessary and burned it with fire so that the edges did not fall off.

the next step I had was making a bow. actually everything in the photo

then I sewed this bow to the neck (knot) of the ball, while grabbing the tape on which the ball will not be held by the tree. There were a lot of stitches done to keep everything well. in principle, if you have a hot glue gun, then all this could not have been glued to it.

so that is all. the ball is ready))))

in general, you can not steam and paint half of the ball. you can make a double-sided ball. just glue the photo together (for example, on a double-sided scotch), insert it into the ball and woo a la

In general, girls fantasize! good luck!!!

Our site publishes materials for those who want to make Christmas and New Year a real holiday for their children, a holiday that they will remember for many years. Here, to help parents, we publish articles and materials on the preparation and conduct of the New Year holidays. Including these are New Year's master classes on making original Christmas tree decorations and Christmas decorations with your own hands. If you start making New Year's decorations, Christmas decorations and gifts for friends and relatives in advance, then by December 31, your house will turn into a real New Year's fairy tale! on the tree. You will learn how to make a Christmas ball with your child with your own hands, get acquainted with the schemes of Christmas balls made of paper, photos of decorations on the Christmas tree.

1. DIY Christmas ball (option 1)

To make this Christmas decoration, you will need colored paper, thin wire, stapler, glue. The balloon you see in the photo above was made from paper in three different colors (pink, blue, and cyan).

Work plan

1. Take a small glass or glass (wine glass) and trace it on paper with a simple pencil 12 times. You should have 12 circles (4 circles of each color). Cut out the circles with scissors.

2. Fold each circle in half and stack them together as shown in the illustration below. We use three colors of paper (A, B and C) to make this Christmas ball. Stack the mugs in the following sequence - ABBCCAABBCCA. If, when making a New Year's ball, you used paper of two colors (A and B), then in this case the circles had to be folded in the following sequence - ABBAABBAABBA.

3. Fasten the circles of paper together with thin wire wrapped around them along the fold line. Twist the ends of the wire together. If you don't have wire, you can use a regular stapler to staple the circles together.

4. Straighten the circles and glue the adjacent halves of the circles together. Each half should be connected to one adjacent at the top, and to the other at the bottom.

2. DIY Christmas balls (option 2)

Cut out three circles of the same size but different colors from colored cardboard or heavy paper. In the first of them, cut a cross (Fig. A), in the second circle make a horizontal incision in the middle and two cuts perpendicular to it in the direction from the circle to the center of the circle (Fig. B), and in the third - four cuts in the form of a cross, also along direction from the circle to the center (Fig. c). Pass the circle "c" into the circle "b". In the circle "a", bend the corners formed as a result of its notch; you get a square hole. Pass the circles "b" and "c" into it, having previously folded them. Then unfold the corners again (Fig. D). Attach a thread to the resulting ball.

3. Paper Christmas balls (option 3)

From old postcards or colored paper, you can make such cute Christmas toys - Christmas balls.

You can print ready-made colored circles for making a colorful New Year's ball using this technique.

4. Making a New Year's ball (option 4)

A very easy-to-make New Year's paper ball. To make it, you need colored paper and glue.

Work plan:

1. Cut eight identical circles out of different colored paper. Although, in fact, the number of circles can be any, but not less than three.

2. Fold each circle in half, facing inward.

3. Glue the halves of the circles together as shown in the photo below. Glue is applied to the seamy side of the halves of the circle.

4. Before you finally glue the New Year's ball, thread a thick thread or ribbon through it. You can also make a wonderful Christmas tree garland from a large number of paper balls.

Note: such a Christmas decoration can be made not only in the shape of a ball, but also in any other shape. Use different stencils for this.

5. DIY Christmas ball (option 5)

To make these wonderful Christmas lanterns, you will need to cut colored paper into strips of the same length and width. The length and width of the stripes depends on the size of the flashlight you want to make. To make one paper lantern, you will need an average of 14-16 strips of paper.

When making Christmas balls, you can use strips of paper of different colors and beads to decorate Christmas toys with your own hands.

If the strips of paper are bent in the middle, then you get such a New Year's decoration.

6. How to make a New Year's ball (option 6)

We invite you to make such a cute and easy-to-make New Year's craft from old postcards together with your child.

1. Using a small glass or wine glass, draw and cut out eight identical circles.

2. Using another object with a round base, but with a smaller diameter, draw and cut out two small circles.

3. Fold each large circle in half and then in half again.

4. Glue the four folded large circles onto one small circle and the remaining four onto the other. As a result, you will have two halves of your future Christmas tree ball.

It is very IMPORTANT to correctly position the quarters of the large circles on the small circle. Try to gently straighten the "pockets" of the folded circles and in advance, before gluing, estimate the correctness of their location. In this case, be guided by the very first photo, which shows a ready-made ball.

5. Now you just have to glue the two finished halves together and, when the glue dries, straighten all the pockets. The Christmas ball is ready!

7. A ball of threads with your own hands (spiderweb balls)

Balls made of threads look very attractive, do not require special skills and money. Many did them at school in labor lessons. And the use of these spiderweb balls is endless: just as an element of decor, and as a lampshade, and as New Year's toys. From several of these balls of thread, you can make all kinds of toys: snowmen, birds, fish. In general, everything that has enough imagination.

Making balls from threads:

1. You will need: scissors, balloons, fat cream (petroleum jelly), any yarn, PVA glue, a bowl.
2. We dilute PVA glue with water, approximately 3: 1.
3. Inflate the balloon to the desired size, give it a round shape, tie it with a thread.
4. Having unwound the required amount of yarn, put it in a bowl and leave for 5 minutes.
5. Smear the ball with a fat cream and wrap it with yarn, for a start leaving a large distance between the thread.
6. Gradually reduce the distance between the threads until the ball is completely wrapped in yarn and resembles a cocoon.
7. Cut the thread and glue it to the ball. We leave it to dry (for at least a day).
8. Gradually untie the balloon, gently blow it off, then remove it from the thread cocoon; we tie a rope for fastening to the thread ball from above.

When making a ball, you can use yarn (threads) of any color or paint with any paint or sparkles (spray). Especially for the New Year, you can decorate this thread ball with tinsel, stars. Hang small balls on the tree, decorate the room with large ones. Dream more daringly!

If you are unable to wind the glue-soaked thread around the ball, you can wind the dry thread, and then thoroughly saturate it with glue using a brush or sponge.

Sugar syrup or starch paste can be used instead of glue. To prepare the paste, take 3 teaspoons of starch in a glass of cold water, mix thoroughly and bring to a boil. Instead of a thread, you can take a thin copper wire and wind it around a ball in the same way.

Old Christmas balls can be updated by wrapping each of them in a piece of beautiful fabric and tied with a ribbon.

Website: http://adalin.mospsy.ru