DIY sunflower from plastic bottles. Sunflower with your own hands from improvised materials. How to make a sunflower from various materials with your own hands in MK

Surely, every craftswoman always wanted to make some piece of furniture with her own hands. But how to do it in such a way that it is both beautiful and not too expensive, since many materials are now very expensive. Therefore, in our article we will tell you how to make a sunflower from materials that do not require special material costs and will definitely be found in the household chest of every needlewoman, with your own hands.

First, we propose to make sunflowers from plastic bottles which are always at hand. Such flowers are perfect for decorating a country yard, flower bed or playground, as they withstand any weather conditions, thus giving the plots an original look all year round.

How to make a sunflower from various materials with your own hands in MK

To make these sunflowers you will need:

• plastic bottles preferably yellow;
• the bottom of a brown bottle;
• glue Dragon;
• scissors;
• yellow enamel paint (in the absence of yellow bottles).

First of all, with the help of scissors, we cut off the bottoms and necks of two plastic bottles, the third bottle only needs to cut off the bottom.

After that, we proceed to the formation of the petals. To do this, we cut the previously prepared blanks into strips 3 cm thick, not cutting to the edge of 1.5 cm. From these strips we model the petals of the future sunflower. One blank is ready. But to create a full-fledged sunflower, we need as many as three of these blanks.

If you did not have yellow bottles, do not despair too much and give up. In this case, you just need to paint the blanks with yellow enamel paint.

Next, we connect all three blanks together with Dragon glue. A blank with a neck should be the last one, because in the future, it will be possible to attach a stem and material to it that seems suitable to you. After connecting the blanks, cut off the bottom of the bottle dark Brown and with the help of the same glue, glue it in the middle of the flower.

Summer, bright sunflower is ready!

Another great addition to your garden will be pumpkin seed sunflowers, which are very easy and quick to make, but look just great.

For work you will need:

• pumpkin seeds;
• onion seeds;
• old CD;
• glue;
• paper;
• thermal gun;
• scissors;
• acrylic paints;
• tassel;
• colorless aerosol varnish.

So let's get started. First, seal the disk with white paper. After that, you need to peel off the film on the pumpkin seeds and use hot glue to glue them in a circle of the disk, with sharp spouts up.

We paint over the seeds with yellow paint and let them dry for a while. Then we well coat the middle with PVA glue and sprinkle abundantly with onion seeds so that the white paper is not visible. We process the finished sunflower with aerosol varnish for better fixation of all details. Let the flower dry. The work is finished, now you can place such beauty in any corner of your garden.

Also, very popular is the creation of sunflower flowers from ribbons. Such flowers can be made in any size and you can decorate anything with them. Often, they are used in women's jewelry, and sometimes in the manufacture of topiaries and various flower arrangements.

And now we offer you detailed wizard a class on creating a sunflower from ribbons with your own hands. For this work we need:

• yellow satin ribbon 4 cm wide;
• green satin ribbon 5 cm wide;
• green satin ribbon 1 cm wide;
• cardboard;
• scissors;
• candle;
• plastic ball;
• green fabric;
• thermal gun;
• coffee beans.

We begin work with the creation of petals. To do this, cut the yellow ribbon into segments 13 cm long and fold them in the middle at an angle of 90?.

Now we fold the tape corner to corner, so that we get a triangle on top.

We connect the lower tips of the petal together and solder with a candle. We need to make 24 such petals.

Similarly, we make sunflower leaves from green satin ribbon, only the length of the initial segment at the same time should be 20 cm. We need 3 such leaves.

For the leaves of the lower cap of the sunflower, we will cut the green centimeter tape into segments 14 cm long. Then these segments must be folded in half, cut off the corner with a soldering iron from the side of the fold line and unfold the petal. In the absence of a soldering iron, you need to fix the edges with a candle.

To get a complete sheet, bottom edges we also connect with each other over the flame of a candle.

Next, we cut out a circle with a diameter of 12 cm from cardboard and fit it with a green cloth, collecting it on a thread along its circumference. For reliability - glue.
now we move on to attaching the petals. First, glue the green narrow leaves evenly, and then the yellow ones between them.

The second circle of petals is slightly shifted to the middle. All yellow petals should be staggered. We do the same with the third row of petals.

Cut a plastic ball with a diameter of 10 cm (for example, from a children's pool) in half and glue one half with coffee beans. Glue the finished center into the sunflower. The flower is ready, if desired, you can make a stem out of wire right size wrapped in green ribbon.

Actual video on the topic of the article

For more curious needlewomen, we suggest watching an interesting video on this topic.

Our today's instruction for creating a product from plastic bottles is a great idea to use it for a summer house or a house with an adjacent piece of land.

If a lawn grows on your summer cottage, select a part of it under a field of bright sunflowers made by yourself. We are sure that you will be pleasantly surprised at how your yard will change after you land two dozen of these beautiful flowers, and your guests will be delighted and ask you to conduct a master class on their manufacture.

Required materials (to create one sunflower):

• Three plastic bottles for water or other drinks;
• Acrylic paints (yellow, green and brown);
• Paint brush;
• Black marker;
• Finishing knife or scissors;
• hot glue gun;
• Bamboo sticks for garter plants (it's cheaper to buy a package right away).

How to make a sunflower from plastic bottles - step by step instructions with photos

1. Carefully remove all labels from bottles. We have also removed the plastic rings from the necks of the bottles, but this procedure is optional.

2. Cut off the base of one of the bottles. Try to do this along the lower transverse line of the recess - so the cut will turn out to be more accurate. You may need to shorten the bottle a little more in the future.

3. Using a black marker, draw small dots on the inside of the base cut from the bottle. In the future, this will be the center of your sunflower.

4. Paint two whole bottles with yellow acrylic paint. The third bottle - the one from which you cut off the base - color in green color. Color the outer part of the base of the bottle, on which you drew the dots earlier, brown. We painted everything in two layers and after applying the final layer left the parts overnight to dry completely.

5. Cut off the bases of the bottles painted in yellow.

6. Next, you must cut the walls of each bottle into 12 narrow strips (these will be petals and sunflower leaves). Leave uncut 3.5-4cm from the top of the bottles. To make 12 strips the same in width, the easiest way is to first cut the bottle into two parts, each of them into two more parts, thus dividing the bottle into quarters. Cut each quarter into 3 more pieces. Bend each strip slightly towards the outside to "open" the flower.

7. Sharpen the outer edges of the strips so that they look even more like sunflower petals. To do this, cut them around the edges.

8. Now you must put all three parts of the flower together: first the green part, then the two yellow ones. Use a hot glue gun to fix the details of the product. Apply glue to nested bottle necks so that the glue is not visible from the outside.

9. Carefully glue the brown core into the center of the resulting flower.

10. Finally, place a bamboo stick at the bottom of the flower (in the neck of the bottom bottle) and glue it with a heat gun.
One sunflower is ready. Similarly, you can make as many colors as you like. Decorate your garden, lawn or flower bed under the window with them. In addition, you can find and watch a video tutorial on creating sunflowers from plastic bottles.

Since the creation of even one flower takes at least a day (taking into account the drying time of the paint), you can make sunflowers (and other flowers) in winter time gradually, as empty bottles and free time appear, and with the onset of warm weather, “land” on a summer cottage or a plot adjacent to the house immediately a large number of colorful picturesque hand-made plants.

If you want to decorate your garden with a sunflower that will never wither, then check out this simple master class and create imperishable beauty with your own hands!

To make such a wonderful, sunny flower, you will need:

• two and one and a half liter plastic bottles (fifteen pieces are transparent, one brown and two green);
• a radio-technical soldering iron with a thin tip, or as a substitute for it, a set of devices consisting of a gas burner, a long nail and pliers;
• old kitchen or tailor's scissors;
• coil fine copper wire;
• tea saucer;
• kit acrylic paints;
• stationery knife;
• drawing brush.

Progress

1. For a transparent bottle, cut off the bottom and neck. Cut the remaining plastic cylinder lengthwise and unfold it into one rectangular sheet. Using the saucer as a template, cut out a round blank from the middle of the bottle and make one radial cut on it.


2. Heat up the soldering iron, or clamp the head of the nail with pliers and heat the end of the nail in the flame of a gas burner. Move the edges of the cut on the round workpiece so that they overlap, firmly clamp the joint and pierce both PVC surfaces with a soldering iron tip (or a nail). After 2-3 seconds, when the edges of the holes are melted and welded together, remove the sting and check the strength of the connection. To securely fasten the edges of the incision, fix them in 2-3 more places.


3. From the upper parts of transparent plastic bottles, cut the semi-finished leaves of the corolla of the sunflower. To make the petals have a beautifully curved shape, use for their manufacture that part of the plastic container where it begins to taper steeply towards the neck. To do this, separate the bottom and the screw neck from the bottle, and cut the remaining cup-like blank into 6 segments 13-15 cm long each. With scissors, shape the segments into pointed petals with a wide middle and a narrow base.



4. Do a similar operation with 2-3 more bottles, and in the end you will get 18 or 24 petals of the lower level, however, the work on the production of corolla leaves does not end there - in order for the sunflower to turn out lush and beautiful, it must be equipped with three rows of petals. Therefore, before proceeding with the assembly of the flower, use the same technology to make semi-finished leaves of the 2nd and 3rd tiers (their length should be 11 and 7 cm, respectively).

5. Having spread the blanks of the petals in size, turn on the soldering iron and, when it warms up well, start using it (as described in the first paragraph of the instructions) to attach the leaves to the inner surface of the round cone-shaped core.

6. First, form the first row of the corolla from the petals turned outward. To do this, attach the leaves to the outer edge of the core, placing them in a circle close to one another and fixing them in a given position with 2-4 touches of the soldering iron tip.



7. Cover the finished row of petals with golden yellow paint, when it dries, stick the second tier (this time already bent inward) leaves on the middle of the sunflower. Attach this row a little closer to the center of the workpiece - this way it will cover the mounting holes of the previous level.



8. When you have completed the second tier, paint it yellow, and make the third row of petals in the same way.



9. Using the same saucer, cut out two more plastic circles - one green and the other brown. Cut the green circle to the middle, fold it with a funky, put the resulting cone-shaped blank on the back of the whisk and fasten them together in 3-5 places with a soldering iron.


10. From the upper part of the green vessel (the one with the neck) make the base of the sunflower - a receptacle with sepals. To do this, make 5 cuts on the sides of the bottle and sharpen the edges of the segments, giving them a triangular-convex shape.


11. Attach the receptacle to the wrong side of the corolla, and at equal distances from the center with a soldering iron tip, make two small punctures through both parts.
12. Pull the wire through the holes, bring its ends to the back of the sunflower, tie them there with a tight knot and wrap the remaining excess around the screw part of the bottle neck.


13. Turn the flower facing you, put a brown blank on its core and weld it to the edges of the cone with 3-4 touches of the soldering iron.

14. For more credibility, cover the middle of the sunflower with black paint, and on top of it, with brown and dark yellow dots, draw concentric rows of seeds.

15. Mount the flower on a stick and set it up in your garden.

Today I suggest you make crafts from plastic bottles to give. A suburban area is often used entirely as a garden, and the monotonous appearance of the beds is a little dreary, reminding us of our labors. Therefore, we decided to propose "planting" bright tall sunflowers. Decorating the garden with such crafts will noticeably refresh the landscape, and make it much more attractive and elegant.

Method 1:

We need paint, wire, a metal rod and imagination. The main tool is scissors, sometimes an awl is required.

From sheets of plastic, which will turn out from the side surface of the bottles, we cut out large petals. Their shape can be different - we make large sunflowers from strongly elongated ovals, and more rounded ones are suitable for “kids”. How many you need is up to you. Small enough 5-8.

Color the petals yellow on both sides. Someone will use spray paint, but I took acrylic.

• When the paint dries, use a heated awl to make neat holes at the base of the petals. Pass the wire through these holes and connect the petals into a flower.
• The remaining bottom of one of the bottles is useful for the core of a sunflower. The fact that it is figured is even more interesting. Paint it black or dark gray color. Then connect with a thin wire to the petals.
• We will make stems from strong metal rods and paint them green. With the free ends of the wire, which were used to collect the petals and attach the core to them, carefully fix the bud head on the top.

Craft for a summer residence is ready! Sunflower from plastic bottles sprouted and ready to move to the lawn.

Method 2:

There is a way to make sunflower petals without cutting out each one individually. Photos clearly show you all the stages of production.

1. Cut off the bottom of the bottle. The height of the cut bottom depends on the length of the petals that you want to get. The longer the petals, the shorter the bottom of the bottle.

2. Cut the side walls with scissors into 10-15 parts along the bottle.

3. Cut out the petals from the strips.

5. It remains only to straighten the petals and attach to the cut out bottom, painted black.

We plant sunflowers

Where to "plant" these man-made garden flowers?

I propose to assemble a composition of several sunflowers of different sizes. Place it near the seating area. Put there a few barrels, pots, boxes - "beehives". It's great if a few bees fly into your "apiary"!

By the way, in the next article I will tell you how to make crafts from plastic bottles for giving in the form of bees, large and small. Such garden decoration will bring a lot of joy to children, and adults will smile more than once, looking at cute bees.

Craft sunflowers with their own hands will certainly captivate every child. Sunflowers are bright, expressive flowers that retain their attractiveness even after fruits appear in them - seeds loved by children and adults.
It is not surprising that these plants attract attention and arouse interest in children, who are happy to try to convey their images in their work.

This craft will be relevant for kindergarten- sunflower can be made in various techniques, including one that does not require constant supervision and assistance from an adult. Children in a small group will be able to repeat the actions of the teacher. For pupils of older groups, you can organize a master class on the topic of how to make sunflowers with your own hands, and reveal in it several ideas for creating unusual images.

A very bright and beautiful sunflower can be made from plasticine. In order to mold sunflower petals, we need to mix three colors of plasticine - yellow, brown and orange. Do not mix them into one mass. Let the veins of each color be preserved, then the sunflower petals will look very impressive.

We decorate a brown plasticine cake with small cuts - this is the middle of a sunflower.

Glue the petals to the middle. We supplement the craft with a green leaf. Plasticine sunflower is ready!

Sunflower pattern

Drawing its core, you can use various improvised items round shape- even a cardboard roll from toilet paper or disposable paper towels. And if you bend this roll on both sides, you get an excellent stamp for drawing petals: just dip it in yellow paint and apply prints around the core. Look what a wonderful sunflower you can draw using this technique! We covered the center of the sunflower with glue and sprinkled with real black pepper. The drawing turned out to be voluminous and very natural!

Depicting flower petals, you can also give freedom to your imagination. For example, you can draw petals with a toothbrush. If at the same time the core is made from a circle of black colored paper, it will turn out to be quite simple, accessible to children younger age, but interesting craft.

The leaves on the stem can also be drawn in an unusual way. For example, the original leaves are obtained from the prints of children's hands made with green paint. You can also draw the flower itself with handprints, using yellow paint for this.

Application "sunflower"

Sunflower seeds glued to the core will decorate such a pattern. There are also different methods for working with the application. For example, as a basis for creating a three-dimensional flower, you can take a disposable white paper plate. We glue a cardboard green stem and leaf to it, and inside we distribute yellow pointed petals in a circle. Pour the seeds into the center of the plate - you're done! The kids will be happy to enjoy a treat from such crafts.

Seeds can not only be poured, but glued to the center of the flower. If at the same time to make its petals voluminous, bending each of them in half, you get a spectacular appliqué.

Application "sunflower" from pieces of paper

You can make the whole flower voluminous, using pieces of colored napkins or corrugated paper for flower wrapping or scrapbooking. We cut a napkin or paper into small squares, crumple each of them into a ball and paste it into a pre-drawn outline of a sunflower.

Like a mosaic, lay out the whole pattern in lumps.

If you want to complicate the work a little, you can lay out the middle of the sunflower with pieces of paper. Coloring the bottom of the plate

We cut out oblong leaves from the newspaper and paint them yellow. We decorate the brown center with black beads. Glue a green stem with a leaf.

Another version of the sunflower, make it in the form of a picture of buttons.

After watching the master class, the children will be able to choose which work technique they like best, and if they wish, they will combine several techniques in one craft. Having created such a rich ground for creativity, educators will only have to organize a place in order to place the fruits in the most profitable way.