DIY anti-slip shoe attachments. What to do with shoes when there is ice. Useful tips. Least slippery shoes

A transition period has arrived. It's icy outside.

Even the softest sole on a shoe may not save a person from ice and slipping. The risk of falling and getting injured in these conditions is very high.

Now we will look at several options - how to make anti-slip pads for anti-slip shoes at home with your own hands. And if you don’t have the opportunity to buy these pads, we’ll tell you how to make sure your shoes don’t slip in icy conditions.

How to cut a snowflake from paper in 1 minute: .

1) Option 1.

We take an old felt boot. We cut a piece from it and nail it with small nails to the sole of our shoes. Or glue it to the sole. Typically, this option using an old felt boot (a piece of felt will also work) will help prevent shoes from slipping if there is no rain (not damp) outside, if there is no snowfall. If all this is present (snow or rain), then the felt will simply form a small crust and will also slide along the road, as if you were skating. This method protects shoes from ice for 7-10 days. Then the felt is washed.

2) Option 2.

To make your own anti-ice shoes, you will need Moment glue. Apply glue to the sole of the shoe with a snake. Let's let it dry a little. Then, using a match, we spread it over the sole with a small snake. After a day, when the glue has dried, we rub it a little with coarse sandpaper so that its surface becomes rough. Typically, this method protects against ice for 4-6 days (a week).

3) Option 3.

Simplest. Take a large adhesive plaster and stick it in pieces to the sole of your shoe. The effect is approximately the same - you will have enough protection from ice for 3-4 days. But it is necessary that there is no snowfall or rain so that the adhesive plaster does not crust over.

4) Option 4.

The hardware store sells special strips with sticky sandpaper (see photo). They are usually used near shops, stuck on the porch to prevent visitors from falling in the winter. In the same way, they can be glued to the sole of shoes, like a patch. Usually this method lasts for 2-3 days in case of ice, since the sandpaper quickly wears out when walking on asphalt or in the entrance of a house.

5) Option 5.

Use of various polyurethane heels. This material is soft, like silicone, and it does not harden when there is ice. Therefore, it clings well to the ice and protects a person from slipping on it. Typically, such heels last the entire season.

6) Option 6.

Metal heels. They are manufactured and sold specifically for those regions where ice is frequent. Or for special services that work in the mountains or in conditions where shoes often slip. These can be special heels with spikes, with nails, heels around the perimeter of shoes, etc. But in the city, where people come indoors after going outside, these heels are somehow inconvenient; they rattle like metal horse shoes. Therefore, they should be used only as a last resort when other methods do not help.

7) Option 7.

Special anti-icing pads for shoes. They are rubber. And on the bottom they have metal spikes, like a studded car tire. By wearing woven pads on shoes, a person will be able to walk very steadily on ice and not fall.

And the most important thing. How to avoid falling in ice.

First tip . You need to choose shoes specifically for winter. That is, the sole should not be made of plastic, which in the cold becomes “oak, wooden” and glides like skates. And it should be made of polyurethane, which remains soft in the cold.

Second tip . The sole of the shoe should be grooved. Then it will “grab” the ice, preventing it from sliding.

Third tip . Develop the habit of walking in icy conditions in a special way, not like in the summer. How to walk in icy conditions? It’s very simple: a) bend your legs slightly at the knees and don’t straighten them completely until you step on a normal, stable surface. b) take small, short, slow steps. If we walk quickly, wide, if we run, then we will quickly fall into the ice. C) be sure to look under your feet, noting areas with ice. If we don’t watch our step, we won’t be prepared for dangerous areas, and the risk of falling in this case is very high.

We all know firsthand how housing and communal services work in our cities; work to take measures against ice is not always carried out on time. And it happens that they do nothing at all, hoping for spring and waiting for warmer weather. The reasons are different, there is not enough material to sprinkle the pedestrian paths, there are not enough workers. Whatever these reasons may be, and whose fault this is, you must admit that you will have to solve this problem yourself, take full responsibility for your health, and take measures to ensure safety. The simplest and only way to protect yourself from injury is to wear anti-slip pads on your shoes, they are also called winter boots.

Frequent fall injuries

Falls on ice often do not go away just like that, but lead to various injuries. Here are some of the most common injuries that can occur as a result of falling on ice:

Ice drifts (anti-ice) for older people

Everyone is at risk of injury from a fall on ice, but falls are most dangerous for older people. The resources for repairing damage in the body are becoming less and less every year. After 45 years, when it would seem that you feel young, bones grow together much more slowly than, for example, in a person 20 years old. And in people over 60 years of age, a fracture can cause disability and put a person in a wheelchair for several years or even for life. After all, with age, bone tissue loses its elasticity and strength, the bones of an elderly person become fragile, and when they fall, they literally crumble, they can break in several places, and crack the bones. By buying anti-icing ice access products, you will take care of yourself and your loved ones and prevent terrible consequences.

It’s very easy to fall in icy conditions in winter; everyone has probably experienced this themselves. In order to feel solid ground under your feet and feel confident on ice, you need to wear anti-slip pads on your shoes. They are made of high quality elastic rubber and studded with hardened steel studs. They will reliably protect you from falls and injuries in icy conditions.

  • If you wear shoes with flat soles, we recommend purchasing ice slides with an anti-slip surface on both the toe and heel. This will ensure the best grip on the surface (ice).
  • For women, it is better to buy ice shoes with an anti-slip surface only on the toe; such ice shoes will be discreetly attached to high-heeled shoes. Anti-ice pads are very easy to put on and securely attach to your shoes. When worn they are not noticeable at all.
  • All anti-slip shoe pads are suitable for any size from 35 to 45.

In winter, slipping is a piece of cake! Ice-resistant shoes will at least somehow protect yourself from falling. To give regular shoes anti-slip properties, it is enough to strengthen special pads under the sole!

These linings are very diverse, and have varying degrees of reliability and service life, but they are definitely better than nothing! You can make them yourself or buy them. And since everything is quite clear with the first option, we just go to the store, select the desired model, select it by size so that nothing stings, and buy! The second option needs to be considered in more detail, because there are quite a lot of homemade devices:

1. The simplest and most effective way is to cover the sides with tape strips (snake, ladder, stripes). This method should last three to five days, but you need to be careful and make sure that nothing comes off (especially if it gets wet), and if this happens, stick on a new patch.

And better use patches with hydrophobic adhesive, for example domestic plasters with glue based on natural rubber. Such glue When wet it only holds on tighter!

2. You can also glue felt to the sole (7-10 is enough). You can also cut out the sole from an old unnecessary felt boot. But, you need to remember that if such a sole gets wet, then ice may form on the felt, and the shoes themselves will turn into some kind of skates, moreover, in this situation, they may even fall off.

3. Or buy sandpaper with an adhesive base, which must be secured to the sole. After some time (several days) it should be replaced with a newer one. In general, nothing prevents you from using ordinary sandpaper glued to glue.

4. Glue is often used (for example, “moment”), which is applied to the sole in random lines and patterns, which are either sprinkled with sand, or after drying, a little coarse sandpaper is passed over it, creating a rough surface. According to those who use this method, it lasts about a week.

5. This is a purely inventive method; all you need is your imagination and desire to do something good. That is, you can make a removable shoe pad, similar to a store-bought one, using available materials: fasten a plate with spikes from screws, put on a spiked strap under the toe, or use some other design.

But, even if you use shoes with anti-slip attachments, you still need to be careful and move as carefully as possible. Don't run, don't make sudden movements, watch your step.

Winter has come, the time of New Year's decorations, romantic warm lights, snow flakes falling from the sky. However, very soon the fairy tale turns out to be not the most pleasant side: due to temperature changes, the streets turn, literally speaking, into an ice slide. Traveling along such a road is very dangerous, and sometimes simply impossible. Of course, they are often sprinkled with salt and sand in order to ensure at least a minimum level of safety, but every now and then you come across areas that resemble a skating rink. How to escape from this scourge and calmly walk along the city streets, admiring the magic of winter? Ice drifts will help for species, producers - all available information is presented below.

Types of anti-slip devices

Ice drifts for which people are convinced of the need for such a “winter accessory” are truly a real godsend, allowing you to protect a person from falling on the ice and getting injured. Are there any particularities in choosing these devices, or are absolutely any models suitable for a safe walk? Manufacturers most often present several varieties of this product:

  • Ice shoes with four studs: all studs are located in the toe area, suitable for both wearing with flat soles and with heels.
  • Ice shoes with six studs: all studs are located in the toe area, compatible with heeled or platform shoes, provide lasting grip.
  • Ice shoes with ten studs: studs are placed over the entire surface from toe to heel, compatible only with shoes with flat soles.

This device is attached to the heel and toe, and allows you to confidently move on slippery surfaces without the risk of injury. Are snowshoes really necessary? There are several categories of citizens for whom it is simply dangerous to appear outside in winter wearing shoes without anti-slip pads!

Who will benefit from ice drifts?

The first category of citizens for whom ice drifts are a necessity in winter are pensioners. Age, unfortunately, makes itself felt - when falling on a slippery surface, the risk of injury and sprains in older people is many times higher than in young people, and the time for rehabilitation and restoration of motor function also increases. Ice drifts will also be useful for lovers of winter walks, fans of active recreation, and travel enthusiasts. Young mothers also appreciated the usefulness of such a device as ice drifts for shoes; reviews and recommendations confirm their delight. Due to the climate of our country, most residents are advised to have at least one pair of safety shoes with anti-icing spikes in their wardrobe in case of sudden temperature changes. Thus, a person will be able to protect himself and his loved ones from the risk of injury from falling on a slippery surface, moving freely on any road.

Manufacturers and brands

There are various types of domestically produced anti-slip devices on the market, and some foreign companies also supply ice drifts for shoes to Russia. Anti-icing de-icers "Magic Spiker", reviews of which can be found on the Internet, are a fairly popular model, but you can also find brands such as "Nevalyaysy", "Winter Horseshoe", "Five Spikes", "Devisys", "Steady Grip". The differences between the models are in the number of studs, the material from which they are made, and the placement of the studs on the foot. Prices for de-icers vary from 200 to 800 rubles, depending on the type of model and point of sale. What do people who purchased ice drifts for shoes think?

Consumer Reviews

“Having put on ice shoes for shoes once, we couldn’t refuse them and went through the whole season with them!” - people leave such rave reviews about anti-ice pads for shoes. Winter walkers allow you to walk safely on any road in winter, and even when going out onto a solid skating rink, a person may not be afraid of falling. “Ice drifts for shoes, ice climbers, winter walkers” - reviews are full of different variations of the names of this device. Most buyers noted that with the purchase of ice drifts, their lives and the lives of their loved ones during the winter period have improved significantly. Some people recommend choosing models in which the spikes are located along the entire length of the foot, since such ice access can reduce slipping, for example, when turning the legs. People usually buy ice drifters for elderly family members, children, and young mothers. Is there really not a single negative review written about the anti-slip device - ice drifts? Alas, not all models were equally effective and convenient for consumers. Most complaints are related to the inconvenience of use: with the spikes located in the toe area, it is impossible to wear ice shoes on a completely flat sole; a small heel is required. In addition, people were confused by the feeling of the presence of something foreign while walking on the ground or on the floor in rooms.

How to choose the right anti-slip pad for shoes

First of all, you should pay attention to the quality of the material from which the ice access shoes are made. The fact is that some are not designed for operation at subzero temperatures, and their use in ice drifts leads to a short service life of the product. The material simply cracks in the cold, the steel spikes slip out of the grooves, and the effect of wearing such a pad may simply not be noticed. It is for this reason that you should refuse to buy the cheapest models. Ice access points must be made of a special rubberized polymer, and sharp elements that provide traction on a slippery surface must be made of a special steel alloy. It is this combination of materials that will ensure the durability of the device.

Important to remember

Alas, methods such as sanding the sole of a shoe, gluing it to its surface, and other dubious ideas will not help reduce the risk of falling on a slippery surface, but will only irrevocably ruin its appearance. Ice drifts for shoes (reviews of various varieties are mostly positive) provide reliable protection without spoiling the appearance of boots.

Add to cart

Shopping cart Continue shopping Place an order

Anti-ice shoe devices

The approach of snow season is not only joy. At such times, due to periodic thaw and freezing, as well as as a result of wet snow, thick ice forms on the surface of the earth. She knocks everyone off their feet - both physically disabled and healthy people. And there is no escape from it. More precisely, there is, but, unfortunately, not everyone tries to use it. What is this? Ice access shoes and crampons are classic anti-icing devices for shoes.

What are ice drifts?

Accessories that are simple in design and allow you to stay on a large area, avoiding injuries and falls. Known for a very long time - approximately from the 4th century AD.

The first examples were a sandal or leather shoe with a rope wrap. It was positioned in such a way as to form a protector in the toe area. These harnesses were practiced by military climbers until the 40s.

Then urban ice access shoes appeared - with a miniature lining made of elastic rubber, into which spikes made of plastic or metal were built-in. When walking, they crash into the ice a few millimeters, allowing you to avoid falling.

Types of ice access

They differ in several ways: method of fixation, material of manufacture, number of spikes. Moreover, the more points of contact between the shoes and the icy surface, the higher the stability.

So, based on the number of spikes, ice drifts are:

  • multi-spike;
  • for 10 spikes;
  • for 6 spikes;
  • for 5 spikes;
  • for 4 spikes.

There is also a spikeless device for shoes (anti-ice option). It is provided with 4 protrusions and is attached to the heel and toe. Designed for shoes with flat soles.

Models with 6-lug pads maintain fairly high stability. These are compatible with shoes with platforms and heels.

10-spike samples are also fixed to the toe and heel. At the same time, the lugs are dispersed over the entire surface of the sole, so they can only complement flat boots and boots.

According to the method of fastening, ice accesses are:

  • classic;
  • round;
  • on belts.

Based on the material used, anti-icing devices for shoes are divided into:

  • metal (steel and cast iron);
  • leather (from natural and artificial material);
  • silicone (elastomer);
  • rubber (rubber).

Which ice drifts are better?

The best are steel ones. They are not subject to abrasion, fit well into ice and are resistant to stress. At the same time, the type of this metal should be taken into account, since the spikes can be made of hardened or unhardened steel. The first ones are preferable, as they are much more reliable. They are easy to recognize by their black color, which appears naturally at the moment of calcination.

Another significant difference is in length. Protrusions made of unhardened steel are much wider in diameter and have a smaller point, so this anti-ice shoe device clings worse to slippery surfaces.

But on the other hand, rubber samples are much cheaper. Moreover, there are combined models in which rubber is combined with metal spikes. Therefore, the key guideline is the scope of application.

For urban conditions, options with fewer protrusions (up to 6 inclusive) or even spikeless ones with a metal frame are suitable. They are not bulky and lightweight. Equipped with a classic rubber mount. Designed for a large range of shoes.

Samples with 6 or more spikes are suitable for women who prefer to wear high heels. Multi-spike ice accesses are designed for climbers.

Under what conditions are ice drifts used?

It doesn't have to be ice. A device for shoes (anti-ice option) is also used when driving on compacted snow roads, when crossing frozen ponds and slopes.

They also help out when hiking over rough terrain, during the autumn-spring period with sudden thaws and cold snaps, and when moving through areas with abundant inclusions of ice formations - frozen small streams and puddles.

Advantages of ice access

The main advantages they provide:

  • increased frost resistance (up to –40º);
  • affordable price;
  • compactness (easy to remove, hide in a bag and put on when returning home);
  • versatility (designed for a wide size grid);
  • durability (anti-ice shoe device is used for more than one season);
  • aesthetics (invisible and do not spoil the appearance of the shoes);
  • confidence when walking on slippery surfaces;
  • easy to take off and put on (this can be done quickly, in a couple of movements);
  • protection from injury during icy conditions.

Note that ice drifts perfectly relieve injuries to the spine, coccyx, skull, fractures of the limbs (especially in the area of ​​the hip joint and hands), as well as sprains and ruptures of ligaments.

The use of site materials without the consent of the author is strictly prohibited. When copying an article, a link to the resource is required.