Poncho from coat fabric pattern. Sewing a poncho with your own hands using our patterns is as easy as shelling pears! Trying out all the different looks

I'm in Lately I got hooked on all sorts of ponchos, capes, capes. Comfortable things - throw them on and go))) And for me to see off my child to school in the morning - that’s it)))
Moreover, you can not only knit, but also sew - easily and quickly.
In the new season (from those on sale in February 2016 in boutiques), most designers offer ponchos, capes, capes - so this is still fashionable and relevant.)
Eg. by RALPH LAUREN BLACK
Asymmetrischer Pullover im Cape-Stil,1.187.37 €

Mostly the models are simple, no frills - apparently the emphasis is on quality and color..

Below is a selection of my hamster supplies collected in a folder on my computer)))
Donna Karan leather trim poncho, $1645

More from CHLOÉ

St.John F/W 2012

Lauren by Ralph Lauren

Allow 1.5 cm for the connecting seams, and 4-5 cm for the hem, if the bottom of the poncho will not be framed with fringe, fur or treated with bias tape.
The length of the poncho can be changed as you like, depending on your height and the intended model; it can be from hip to knee level, but these are average figures. You, knowing and remembering the uniqueness of each figure, will choose your length.

We fold the fabric in half and draw a semicircle, by the way, it somewhat reminds us of a drawing of a skirt - the sun, doesn’t it? We cut out the shape of the neckline, the cut for the fastener and that’s it – the cut is complete!

Next, there are “variations on the theme”... You can model a poncho in such a way as to make a belt and stretch it through through cuts at the waist level, treat them with elements of suede or leather, or you can simply leave it as is (if you are sewing from thin fabric and not think about the indispensable warmth of the product). The poncho option with a fastening bar along the entire length of the front is also very beautiful.

Cape pattern. It is built on the basis of a base pattern


We close the shoulder dart by converting it into a waist dart. Now, we combine half of the sleeve (set-in shirt) with the base and outline everything with a general outline. We do the same with the back, raising the pattern of the base of the back a little, combining it with the back half of the sleeve and outlining everything together.

We cut out the parts from the main fabric, process the slits for the hands, it can be in the form of welt pockets with a leaf, we connect side seams, sew on the bottom of the collar and bend the bottom. We cut out the lining parts and connect them in the same way with the upper part of the collar and the lining parts and also fold the bottom. Now we sew the lining to the main fabric. To do this, we apply them “face to face”, connect them, do not touch the bottom (in our case, the lining will not be connected to the main fabric at the bottom of the product), turn them inside out, punch through the loops, sew on the buttons and the cape is ready!
http://portnishka.tv/kak-sshit-nakidku-i-poncho-chast-2/
Poncho coat pattern from korfiati.ru

Back neckline: From point B down, set aside 2.5 cm for all sizes. Draw the back neckline according to the pattern.

Additionally, construct a collar for the poncho coat with a length equal to the length of the neck according to the pattern without a collar.

Poncho coat pattern: cutting
From the main fabric, cut out:

2 parts of the front half of the poncho coat (with a fastener and a one-piece hem)

1 piece of the back of the poncho coat - with a fold (without going to the fastener!)

Stand-up collar of a poncho coat - 1 piece. with a fold.

Belt - 2 children. 20 cm long and 10 cm wide (in finished form you should get 2 belts 20 cm long and 5 cm wide)

From lining fabric - the front half of the poncho coat - 2 pieces. (cut to the blue construction line, without taking into account the opening of the fastener and the hem), the back of the coat - 1 piece. with a fold.

Stand collar - 1 piece. with a fold.

How to sew a poncho coat
On the parts of the front and back of the poncho coat, make shoulder seams from the main and lining fabric.

Press seam allowances. Turn the one-piece collar to the wrong side and iron it.

Place the lining of the poncho coat face to face with the garment and baste it to the lining along the longitudinal seams.

Sew, turn right side out. Allowances for bottom edge Tuck the poncho coat and hem it by hand.

Reinforce the stand-up collar made of the main fabric with an adhesive interfacing, fold it with the lining collar face to face and stitch along the short and top edges.

Turn, iron, stitch. Sew the collar into the neckline, place the lining on top and sew in one line, stitching the lining along the neckline.

Sew both belts, topstitch them along the edges, baste them according to the marks, and stitch them.

Sew the loops along the markings, sew on the buttons.

As easy as pie! This original poncho coat from Baby Phat can be sewn according to the pattern even by a novice dressmaker. However, it will look gorgeous!

Note the contrasting, fiery red fabric of the poncho coat lining and gold buttons. It is these details that can turn a simple poncho coat into a luxury item.

Rice. 1. Military style poncho pattern

Poncho coat pattern: construction

From the upper right corner - point B - draw two lines - horizontal to the left and vertical down. From corner B along the horizontal line, set aside 7.5 cm (1/3 of the half-circumference of the neck plus 1.5 cm: 18/3+1.5=7.5 cm) and down 7.5 cm (1/3 of the half-circumference of the neck plus 1 .5 cm: 18/3+1.5=7.5 cm). Using the pattern, design the front neckline.

Back neckline: from point B down, set aside 2.5 cm for all sizes. Draw the back neckline according to the pattern.

Additionally, construct a collar for the poncho coat with a length equal to the length of the neck according to the pattern without a collar.

Poncho coat pattern: cutting

From the main fabric, cut out:

2 parts of the front half of the poncho coat (with a fastener and a one-piece hem)

1 piece of the back of the poncho coat - with a fold (without going to the fastener!)

stand-up collar of coat-poncho - 1 piece. with a fold.

Belt - 2 children. 20 cm long and 10 cm wide (in finished form you should get 2 belts 20 cm long and 5 cm wide)

From lining fabric - the front half of the poncho coat - 2 pieces. (cut to the blue construction line, without taking into account the opening of the fastener and the hem), the back of the coat - 1 piece. with a fold.

stand-up collar - 1 piece. with a fold.

How to sew a poncho coat

On the parts of the front and back of the poncho coat, make shoulder seams from the main and lining fabric.

Press seam allowances. Turn the one-piece collar to the wrong side and iron it.

Place the lining of the poncho coat face to face with the garment and baste it to the lining along the longitudinal seams.

Sew, turn right side out. Fold the allowances along the bottom edge of the poncho coat and hem it by hand.

Reinforce the stand-up collar made of the main fabric with an adhesive interfacing, fold it with the lining collar face to face and stitch along the short and top edges.

Turn, iron, stitch. Sew the collar into the neckline, place the lining on top and sew in one line, stitching the lining along the neckline.

Sew both belts, topstitch them along the edges, baste them according to the marks, and stitch them.

Sew the loops along the markings, sew on the buttons.

They come back into fashion every five years. And this is not surprising - no complicated cutting lines or measurements. The base of the coat is a simple rectangle. In order to create an interesting voluminous silhouette, you can use double-sided fabric.

What is a poncho

A poncho is a rather unique piece of clothing that is gradually penetrating more and more into the fashion world. Previously, it was considered the traditional attire of the inhabitants South America, and now confidently wins the hearts of fashionistas from catwalks and glossy magazines.

It is worth noting that not a single fashion show in the last couple of years has been complete without this original garment.The main distinguishing feature of a poncho coat from a regular coat is the absence of sleeves.

Although lately designers have been slightly modifying this robe, and some semblance of sleeves is sometimes visible.

Previously, ponchos were worn everywhere by both men and women.

Nowadays, female models are more popular. It has changed quite a lot and acquired many new varieties.

The most popular models are:

• knitted ponchos that don't have to be warm. There are also lighter models that can be worn with pleasure on a cool summer evening;
• that will help create a luxurious image for its owner;
• fashionable ponchos with checkered prints, which appeared thanks to the efforts of designer McCartney;
• classic and cropped cashmere ponchos that will be incredibly practical in rainy weather autumn time and shelter from wind and rain.

We will tell you how to sew a poncho with your own hands below. First, let's decide how and what to wear it with.

Choosing a poncho style

A coat-poncho is already enough bright element image, so it's not worth it once again overload with bright accessories.

Its main advantage is that it suits almost everyone. In it you can imagine both a young girl and overweight woman and both of them will look elegant and sophisticated.

The main rule when wearing any poncho is the priority of shoes with heels. Even if it’s not big, it must be present.

The best option for any figure and build is a classic poncho. It is usually mid-thigh length. Worn with almost everything: jeans, trousers, skirts. It is recommended to complement the outfit with a beautiful cap or hat, as well as gloves.

More modern models, which boast a hood or fur trim, are usually shorter than classic ones. They have become most popular among young representatives of the fair sex. They are combined with tight jeans and leggings, skirts and even dresses. Shoes are chosen depending on preferences and the overall outfit: these can be comfortable low-top boots and high-heeled shoes.

Most short models or mini-ponchos are worn more as an additional element in the image. It will look great with both a dress and jeans. With such attire you get an incredibly wide range of possibilities.

An undeniable advantage, even in the absence of much experience in sewing, you can create DIY poncho coat, complementing and diversifying it additional elements to your liking.

If you are determined to start sewing such a robe, you should first choose a style. It is best to choose simpler styles for the first time, without a hood or additional elements.

Few people have any idea how to sew a poncho, but it is quite simple if you follow a few simple tips:

• Correctness is of great importance taken measurements. If you doubt your abilities, ask a friend or family to help you and take measurements as accurately as possible.
• For materials, choose wool fabric. You can also take felted cloth or good quality fleece
• To begin with, choose models where you don’t need to make a shoulder seam or fuss with sleeves. You need to create a simple cape from a simple piece of fabric.

According to the simple option For a poncho coat pattern, you need to take several measurements, namely:

• measure the shoulder length and sleeve length;
• neck circumference;
• measure the length along the back.

The first time you look at the pattern, you might think that everything is very complicated. However, it is not. To begin, make a rectangle whose width will be equal to the sum of 1.5 cm + the length of the shoulder, sleeve and a third of the semicircle of the neck. The length will be equal to our measurement for the length of the back and do not forget about the seam allowance of 3-4 cm. Pattern of a poncho coat (diagram 3)

Finish the drawing here. You can roll up your sleeves and start cutting out the details. We make the following details:

• the two front halves must be one-piece with a hem;
• one back piece (back);
• neck – 1 pc. with fold;
• pockets: top – 2 pcs. and bottom – 2 pcs.

You also need to remember that you will need to make belt loops both at the back and at the front.

How to sew a poncho coat

Let's start sewing

Now that all the details are ready and your hands are already itching, you can proceed directly to sewing according to the following instructions:

1. You need to prepare the side seams: you need to baste them, then stitch them, but leave the bottom of the sleeves untouched. Once everything is ready, iron all the seams thoroughly.
2. Now you can start sewing the facing of the neckline of the front and back of the poncho. Turn it right side out, then carefully sweep and iron.
3. The pockets need to be tucked and sewn with neat hidden stitches. This will have to be done manually without the help of a sewing machine. First, they are tucked in according to specially left allowances, and then applied to the poncho according to the markings made. After this, we baste the pockets and sew them directly by hand.
4. Let's start decorating the bottom part. Fold in the seam allowances and sew with neatly hidden stitches.

The last step is sewing on buttons or buttons (depending on what you chose). And this is where the work is finished: you can please yourself with a new thing.

How to sew a poncho coat

Coat-poncho in an hour

Poncho is a wonderful option for outerwear. It suits any body type and goes well with trousers or a skirt. It does not restrict movement and hides figure flaws. Depending on the fabric from which the item is made, it can be worn both in winter and summer. Whether you're tall or short, thin or curvy, this piece can transform any woman. In addition, a poncho is a practical thing. Not having large quantity fasteners, it is put on in an instant. But its most attractive quality is the simplicity of tailoring, which will allow any representative of the fairer sex to special effort and the cost of updating your wardrobe.

There are several points in sewing a poncho that directly affect the final result. This is taking measurements to create a pattern, choosing fabric, color and style of the future item.

Are measurements needed?

The main indicator on which the pattern is based will be the chest circumference. That's why Taking measurements is mandatory.

On a note!

To measure chest circumference, pass the measuring tape so that it covers the back of the shoulder blades and passes through the top of the chest in front.

You will also need the following measurements:

• arm length (measured from the top of the shoulder to the wrist);
• Waist;
• shoulder (measured from the base of the neck to the shoulder joint);
• neck circumference (measured at the lowest point).

Attention!

Don't forget to add a couple of centimeters to the measurements you received for a loose fit.

Selecting fabric for a poncho

One more important point is the choice of fabric. It directly depends on what time of year the selected model is intended for. For cold weather, warm, dense fabrics are better suited: drape, wool, velvet. For lightweight options, choose linen, silk, satin. For those new to sewing, for the first pattern, it is better to choose a fabric that does not require much skill in finishing the edge.

On a note!

For the winter model, you can choose a fabric that is not very thick; just duplicate it with a lining.

Color and style play an important role

Next, decide on the style and color. This can be a semicircular model or a traditional rectangle. With a hood or a collar. With and without sleeves. A bright item or one decorated with sequins and beads will look more elegant. Everyday clothes can be trimmed with fringe. An effective move would be to finish it with a contrasting material.

Sewing a poncho: the first stage

Having decided on an option, the first step is to make a pattern for the future product. It is from this stage that the quality fit of the item will depend. After all, it is on it that you will cut out the details of the future product.

To create a pattern for a classic model, you need to follow simple steps:

1. Measure the height of the future product: from the top of the back to the desired length.
2. Take measurements from the shoulder and arm, as well as the neck circumference.
3. Draw a rectangle in which one side is the height of the future product, and the width is equal to the sum of the measurements of the arm, shoulder and 1/3 of the neck circumference.
4. Draw a neck line in one corner.
5. Make any necessary adjustments to the pattern.

If you want to sew a poncho with a hood, then take the classic pattern as a basis and add hood details to it.

To create a hood pattern, you will need to take measurements from your head and use the sample provided below. Sometimes this detail is cut out together with the main elements.

Creating a pattern for the sleeve option will be a challenge. But the result is worth the effort. The proposed sample is supplemented with pockets, but you don’t have to use them. Sometimes it is easier for the craftswoman to knit the sleeves. This option will also look good.

Patterns of new poncho models for women

The variety of variations of this clothing is very large. And for each, individual changes must be made to the basic pattern. Yes, for models with stand-up collar, you need to add the necessary detail to the basic pattern. You can also complement this item with a stylish belt. It will be especially interesting to sew it from contrasting fabric.

How to sew a poncho with your own hands: step-by-step guide

Anyone can sew a poncho on their own. To do this, it is enough to be able to hold a needle in your hands and do the work accurately and accurately.

Cutting the fabric is an important part of making this item. Moreover, it is important to take into account the correct layout of the pattern according to the prepared material. It will depend on the width and length of the fabric cut.

Important!

When placing parts on the canvas, do it in one direction.

We sew a poncho with our own hands

The simplest version of a poncho does not require creating a pattern. Just follow the instructions below:

1. Take a piece of fabric measuring approximately 120x120 cm.
2. Cut a round hole with a diameter of 20 centimeters strictly in the center.
3. Make a small cut (about 10 cm) in the center of the front from the neckline.
4. Finish all sides with bias tape.

If you wish, the resulting item can be decorated with fringe or elegant embroidery along the hem. A decor made from appliqué, a pattern of sequins or beads would look good. If you combine fabric and decor correctly, you will get a wonderful new thing for a festive evening. For everyday use, you can make simpler models.

For cold weather, sew yourself poncho made of warm fabric with faux fur trim:

1. Buy warm fabric (fleece works well).
2. Cut it according to the pattern below.
3. Sew the side seams.
4. Connect the front and back neck facing pieces together.
5. Next you need to sew the neckline.
6. Turn over and sew the bottom.
7. Sew fur trim and outer fasteners, preferably unusual shape.

Now you can sew a poncho for any weather.

How to easily sew a poncho with your own hands

Not all needlewomen have enough sewing experience to make complex poncho models. But it doesn't matter. After all, there are quite simple types.

The simplest thing is to sew a round poncho.

1. Take a piece of fabric and shape it into a circle.
2. Then draw it into four equal parts.
3. Draw a circle for the neck in the center.
4. Cut on one side, this will be the front line.
5. Finish the edges with bias tape.

If desired, sew on a stand-up collar. If you want, you can decorate decorative elements. This type of tailoring can be used to create both warm and light clothing. It is comfortable to wear. Hides figure imperfections.

Another option for a fur poncho would be a model with a one-piece hood.. By adding elegant clasps, you will get a very elegant item.

Another interesting option for this thing is if you make it double-sided. For this:

• cut from two different materials identical parts;
• then fold them with their front sides facing each other and sew them together, except for the neck area;
• turn the resulting part inside out and iron it;
• carefully sew up the neckline.

It is advisable to trim this item with contrasting material along the neckline and edges. The beauty of this type is that this thing can be used in two variations, which means you won’t get tired of it for longer.

Important!

When selecting fabrics, consider the compatibility of the two selected colors.

You can also decorate this model with lace or ready-made applique. This model will be well complemented by faux fur trim.

How to sew a poncho from what you have on hand

If you have two identical large scarves at home, then you can build an interesting version of a poncho from them. It will be enough to sew them together leaving the neckline. A brightly colored scarf in combination with fur trim will look especially wonderful. It will fill your look with the traditional charm of Russian beauties. And lined with a warm lining, it will warm you up in the autumn.

Another option for sewing a poncho would be to cut the neckline in the center of a large scarf and trim the cut edge with bias tape.

When joining two scarves, it is not necessary to cut off the corners in the neck area. By turning them inside out, you get an interesting variation with an unusual asymmetrical collar.

Sewing a poncho is half the battle done. It still needs to be properly combined with other clothes and shoes. Here are some recommendations for using this wardrobe item:

• When putting on a poncho, try to wear models with heels. This will give your figure more slimness and stature.
• When wearing colorful clothes, take a plain poncho. Wear an item made from scarves with plain options.
• When choosing a fabric for sewing a summer version, take one that is more airy.
• The poncho sleeves can be knitted or made with clasps.
• The neckline can be redrawn from the finished item that fits you best.
• The poncho can be belted. A contrasting belt will look especially interesting.

As you have already seen, this thing is very beautiful, functional and easy to implement. It is perfect for pregnant women. Will serve as an elegant addition to an evening outfit. Will warm you up in chilly weather. And most importantly, without extra effort and costs will replenish your wardrobe. Imagine how your heart will be warmed by praise for your appearance And skillful hands. Even if you have never held a needle in your hands, take a risk and you will succeed.

We sew the most fashionable coat this season... a cape, poncho or just a cape

Even a beginner can sew a cape coat, poncho or cape... choosing a style “within his strength”! Effectiveness and simplicity of execution are what attract and maintain constant interest in their cutting and modeling.

The simplest option is the absence of a shoulder seam, creating a cape with a minimum of funds from a cut of the required length and width.

FIRST OPTION

This fur cape coat from Jaegar London is a real find for budding dressmakers. And sewing and cutting such a coat is as easy as shelling pears. In addition, if you sew it from soft fleece, you can do without a lining. We offer you our own, simplified version of this masterpiece.

How to model a coat

In order to create a pattern for this coat, you need take a few measurements namely:

Shoulder length + sleeve length
Back length of coat
Neck circumference

The main advantage when creating a coat pattern is its simplicity! Draw a rectangle with a width equal to the length of the shoulder + sleeve length + 1/3 of the neck semicircle (SNC) + 1.5 cm and a length equal to the length of the coat along the back.

Draw the neck of the back of the coat and the neck of the front of the coat according to the pattern as shown in the pattern drawing (AB1 = 1/3 POSH + 2.5 cm). Add 5-6cm along the front of the coat and draw a new line for the middle of the front of the coat. Draw a one-piece border. Dotted line of blue color The facing of the back of the coat is marked.

How to sew a coat

From the main fabric, cut out:

The front half of the coat - 2 parts, one-piece with a selvedge

Coat back - 1 piece. with a fold.

Coat back neck facing - 1 piece with fold.

Top coat pocket - 2 children.

Bottom coat pocket - 2 children.

Important! Make loops for threading the belt both on the front half of the coat and on the back of the coat. The belt is threaded along the back and front over the coat.

Description of work:

Baste and stitch the side seams of the coat, leaving open areas along the bottom of the sleeves. Stitch the facing of the back neckline to the facing of the front neckline, and press the seams.

Fold the hem along the middle front line face to face, sew the facing of the front neck and back of the coat with one line. Turn right side out, sweep clean, iron.

On the back of the coat and the front half of the coat, sew stitches into the frame.

Fold the seam allowances along the tops of the pockets and sew them by hand using blind stitches. Fold the pockets in according to the remaining allowances, place them on the coat according to the markings, baste and sew by hand using blind stitches.

Fold the bottom of the coat and sew with hidden stitches. Sew the hem allowance to the coat allowance using a flexible stitch.

Sew buttons according to the marks.

SECOND OPTION

As easy as pie! Even a novice dressmaker can sew this original cape coat from Baby Phat. However, it will look gorgeous! Note the contrasting, fiery red lining fabric and gold buttons. It is these details that can turn a simple cape coat into a luxury item.

How to cut a coat:

From the main fabric, cut out:

2 parts of the front half of the coat (with a fastener and a one-piece hem)

1 piece of the back of the coat - with a fold (without going to the fastener!)

Belt - 2 parts. 20cm long and 10cm wide (in finished form you should get 2 belts 20cm long and 5cm wide)

From lining fabric - the front half of the coat - 2pcs. (cut to the blue construction line, without taking into account the opening of the fastener and the hem), the back of the coat - 1 piece. with a fold.

Stand collar - 1 piece. with a fold.

How to sew a cape coat:

On the front and back parts of the coat, make shoulder seams from the main and lining fabrics. Press seam allowances. Turn the one-piece collar to the wrong side and iron it. Place the lining of the coat face to face with the garment and baste it to the lining along the longitudinal seams. Sew, turn right side out. Fold the allowances along the bottom edge of the coat and hem them by hand.

Reinforce the stand-up collar made of the main fabric with an adhesive interfacing, fold it with the lining collar face to face and stitch along the short and top edges. Turn inside out, iron, topstitch. Sew the collar into the neckline, place the lining on top and sew in one line, stitching the lining along the neckline.

Sew both belts, topstitch them along the edges, baste them according to the marks, and stitch them.

Sew the loops along the markings, sew on the buttons.

THIRD OPTION

Modeling a cape (poncho)

A poncho looks impressive, and it is much easier to sew than a jacket or coat. Depending on the fabric and finishing, both casual and dressy options are possible.

Features of the pattern: To create a cape pattern, a pattern with a set-in shirt sleeve is used, and with a slight change in the back.

Building a shelf
We close the chest dart of the shelf.
Due to the closed chest dart, the waist dart opens.

We combine the front half of the shirt sleeve with the armhole of the front.
We outline a new contour.
We received the front part of the cape.
Building the back
Similar actions must be done with the back and sleeve. But the back must first be changed, as for constructing a kimono, i.e. Raise the neckline and shoulder line as follows:

move point A up 0.7 cm,
move point A2 up 1 cm,
move point P1 up 2 cm.
By combining the back half of the sleeve with the back and outlining a new contour, we get a pattern for the back of the cape.

FOURTH OPTION. Circle cape!

Yesterday I tried on a similar cape made of double-sided wool, dark and light gray, it looks amazing. If you are short and wear it with the long part down, you get a long vest, but if it’s the other way around, the collar covers your arms and “sleeves” appear. This versatile cape will be useful both in your wardrobe at home and at work!

Recommended material: woolen fabric, felted, mohair or, as a cheaper option, good quality fleece. It can be sewn together with cutting in half an hour. Armholes are processed like framed loops.

Take a circle with a diameter the width of the fabric, say 140 by 140.
Divide it in half horizontally and vertically. In the second half, we draw two vertical segments that start from our horizontal line. We will place the segments on both sides of the vertical at a distance of 20 cm, i.e. between segments - 40cm.

Considerations were expressed regarding the possible use of sleeves in the model:
Gold fish: Sleeves can be tied.
Renata: since the shoulder line is horizontal and the item is quite voluminous, a sleeve in the form of a rectangle and an armhole in the form of a slit are absolutely suitable.
I propose to make the sleeves fastened with buttons.
Without sleeves, you can wear it “upside down” and determine for yourself where your legs are. If you sew sleeves like a kimono, then this possibility remains, but if you sew “correct” sleeves, then you cannot wear them “upside down”.

FIFTH OPTION. Cape with vest from Burda! Two styles!
Unfortunately, I didn’t find any ready-made patterns, I searched the entire Internet - all the magazines for downloading without patterns. But actually redoing your base pattern after looking at the description from the magazine won’t be too difficult. If, however, someone discovers ready-made patterns to this magazine, I will be grateful if you give me a link.

SIXTH OPTION.
Schemes and description from a foreign site. Automatic translation - please don't judge too harshly))

Modeling

front half:
AC = 1/4 chest circumference
CM = 1/4 circle. Chest cm.3 +
RP = 1/7 circon.torace
AB = toe length

Rear half:
AR = 1/12 of a circle chest
AC = 1/4 chest circumference
CM = 1/4 circle. Chest cm.1 +
KP = 1/18 of a circle. Breast
RP = 1/7 of a circle. + Cm.1 chest, 5
AB = toe length behind

Creating the base explained above, with the length of the cape which you want to achieve and trim, draw at a right angle, lay the template on the vertical side of the front and along the horizontal axis of the model by matching the point behind the shoulder, drawing a curved line B to B Tracing the contour as it appears in the drawing Here. To cut the handrails, mark 50 cm distance D from C and continue as described in the drawing.

Draw a slit in the skirt about 8-10cm wide (follow the instructions on the design side, the pocket in the skirt is part of the painted in green color, white part of the liner model)

Cutting and sewing: crop model, target with contacts on the fabric already treated, point in front of the front pocket in the skirt and in the center of the wire on the back doppiofilo. Go around the soft points, remove the pocket in the skirt and go even centrodavanti, cut the line of the railing and go slowly to the points in the slot. Cut with a margin of 5 cm from the rim line, 1 cm from all others. Make a cut at the beginning and end of the attachment collar.

Make a small cut in the center of the back of the collar, pocket in the skirt and cape (see blue dots in the first picture). Open with two layers of fabric and cut long strands twice. Intelinare trim and collar (1 only). Sewing pennies on the shoulder, back pocket in a skirt. Place straight with straight lines on both sides of the collar, sew the sides and more curve, add to the side of the cape does not fit intelinato nicks, and the other to the pocket in the skirt, sew the other side of the pocket in the skirt, like the blue lines of the second design, turn to the right.

Intelinare patina, fold their lengths and sew them inside out to 1 cm from the 2 short sides, turn one and sew them right according to the instructions shown in the picture. Sew hem. Focusing on the SPP, switch brands into a braid, cut with a margin of 1 cm. Sew a pocket in the skirt and with a slit along the edge of the brands around the hole and secure the cape with small 1 cm points, tucking in with your hand. inside. Make loops along right side and to attack the button.

Vassa's poncho

The poncho is incomparable in terms of convenience and comfort; you can wear any thing under it - both elegant and simple jeans.

I “torn off” a 1.90 m piece of fabric in the store. It was a pity to cut the fabric - such beautiful stripes. A 0.25 m strip was cut along the entire length of the fabric for a scarf collar, and I tied tassels at its ends.

The fabric was a little short of what I wanted, so I had to knit the tassels at the bottom and the cuffs on the sleeves.

In the center - inserted detachable zipper and placed the entire product on the lining.
To complete the set, I knitted a bag with peonies and tassels, and embroidered it with glass beads and beads.

Poncho from Kitti

The entire creation process took about 4 hours. A poncho with fur trim is sewn easily and simply, but it turns out spectacular!

You need 2 meters of soft, double-sided, well-draped fabric with a width of 140-150.

We fold the fabric in half along the length of the cut and boldly make an incision along the fold exactly to the middle! View of the poncho unfolded.

During the fitting, we will clarify the outline of the poncho. The original model has square tails.

You can round them by drawing lines in front of the mirror. To ensure that the lines are symmetrical, before cutting off the excess, first fold the workpiece in four.

We determine how much fur is needed for finishing. We measure the length of all cuts.
The finishing width is 10 centimeters. I needed a piece of fur 70 cm long.

We cut the fur with a razor from the wrong side. The villi should look down, not to the side! We sew the fur strips by hand using large, sparse stitches. If you sew with small and frequent stitches, the fur may wrinkle. First we sew the fur strip on the bottom, then on the top.

Cape poncho from Helena

The poncho is one-piece, only the neck (“Dracula collar”) is formed with raised seams. The pattern is inscribed in the fabric pattern - the central figure and the ornament forming a rectangular carpet. Photo of the back.

Material: carpet 100 by 110 cm, double knitted weave. On the wrong side there is a light knitted base, on the front side there is a woolen, velvet type. All together creates the impression of a tapestry and the effect of heavy stretchy fabric. Hence the problems - the fit of the shoulder and the calculation of the lining.

I took the pattern from Burda. I built it directly on the fabric, relying on the proven method of changing the pattern, because only the shoulder seams are important. Well, it flew by with the shoulder: it turned out to be longer than necessary, I had to hem the shoulders, put the seams on the binding...

The fit is good, but because of this cutting error, the “sleeve” itself turned out to be a little small. I spent a long time choosing the location of the slots for the hands. It seems convenient.

I sewed on the lining - and the whole cloak was warped! It turned out that I didn’t take into account the elasticity of the fabric, a few centimeters were missing vertically. I had to re-pair it and add 10 cm in the shoulders (I decorated them with parallel gathers). Now it fits like a glove.

More about the fabric: the salesman in the store said that they usually take two carpets and sew them together, leaving a hole for the head - they get a loose “Indian” poncho. I was the first to come up with something unusual from this fabric.

Puppeteer's Cape

The silk-lined cape was sewn because “I just wanted to.” Now she is decorating a mannequin in a store :) The interesting texture of the material is given by a layer of lace on a brocade base.

If the cape is unfolded, its length will be 180cm and width 90cm.
The cape required: 2 meters of silver brocade with a width of 90 cm. 180 cm of lace fabric, about 4 meters of lace with beaded embroidery. 2 platinum foxes.

The pattern was made by eye. Before modeling, the batwing cut was taken as a basis.
Decorative stripe: the same brocade, but covered not with lace fabric, but with a ribbon with beads. The width of the finishing fur strip is 10 cm.

For fur trim, only embroidered ridges were used. “In stitching” means that the plate consists of fur strips sewn together. This allows you to make the thin flesh stronger and more elastic.
The fur was too thick for a stole, so thin strips of leather were placed between the strips of fur. On a furrier's machine, the strips were stitched at a distance of 1 cm.

Creation of fur trim: The fur is sewn together at a furrier and moistened with a special compound. Then it is stuffed from the inside out with small nails onto the board according to the shape of the pattern. After the fur dries, the fur accurately holds the shape of the pattern and does not crawl. The fur strip is sewn to the cape by hand.

Circle cape from Tanja.

This model is different from previous ones original idea creating an unusual shape. It has kimono-type sleeves (an option without them is also possible). Depending on which side is chosen as the “top,” the length of the product and the shape of the collar change.

Tanja tells... The model was sewn spontaneously, in 1 night, on a virtual model. In the morning, the cape was instantly bought from my store by a very nice lady.

The fabric is pure wool, quite thick, double-sided. The edging is viscose braid, lace. I folded it in half and edged the edges.

The distance between the armholes is 50 cm. The sleeves are almost a kimono, slightly narrowed at the bottom. The sleeves are sewn with a linen seam. Photo unfolded.

Since the fabric is double-sided and the seam is chosen correctly, the cape can be worn on the light or dark side. The ability to choose a long or short part of the cape as the “top” adds options for its use.

OPTIONS for patterns from different magazines.
Here mostly knitted models, but the patterns are also suitable for sewing from fabrics.