Santa Claus from Polyfoam with his own hands. How to make Santa Claus do it yourself, detailed master classes with photo ideas. From cotton disks

Always waiting for the magical holiday, the whole family is taken for the manufacture of Christmas decorations for green beauty and dwelling. And the most beloved handicraft rightly is the main symbol of the New Year holiday - Santa Claus.

We suggest you to make Santa Claus from paper. With this simple material, you can create real masterpieces with your own hands. It is only necessary to pay a little time to this lesson and show all your limitless fantasy.

Explore our master classes for the manufacture of Santa Claus with their own hands and you can please our close-old New Year's gifts, made with soul and attention.

Modular origami Santa Claus - master class

We will need: A4 paper sheets: blue - 14 pieces for 211 modules, white - 13 pieces for 207 modules, pink color - 1 sheet for 17 modules.

Each sheet is divided into 16 rectangles, of which we will make modules.

Step one. Bend a rectangular leaf along in half. With the help of another fold we plan the line of the middle.

Step second. We drive the edges of the folded along the rectangle to the middle, as shown in the photo. We turn the part and bend the lower edges upwards.

Step Three. We fold the corners, running them through a large triangle, and then we sweep these corners inside. Bend the resulting figure in half - so we learned to make the module. Now in the same way we make the required number of modules, designated above, from the rest of the paper.

Step fourth. Getting to make crafts. We take 5 white modules and have, as in the photo (the upper row module has a smaller side up). Next, we collect a chain of 3 rows of white modules. Each series consists of 25 pieces.

Pitch fifth. We clicze the chain into the ring and turn it over it. Next, we perform 3 rows of blue modules. From the seventh row we make a beard. To do this, insert 2 white modules with a smaller side out. The remaining blue modules of 7 rows insert, as usual.

Pitch fifth. In 8 row, we fix 3 of the white module, as usual, the long side, the remaining modules are blue. With each following next to add one white module on each side of the beard.

Step six. In 11 row insert one red module in the middle of the beard - this is a mouth. 12 row consists of white modules. We dress them on the blue modules with a smaller side outside, on the white modules (beard) - the long side, as usual. In 13 row opposite the red module, we dress the white long side to the outside, and 2 modules of pink color - smaller side (see photos).

Step seventh. In 14 row we dress 6 pink modules with a smaller side, and white modules wear as usual. 15 row - wear 17 white modules and 8 pink. In 16 and 17 row we dress all the white modules with a smaller side out - this is a hat.

Step eighth. The last 18 row consists of blue modules smaller side out. Hands collect 3 white modules and 5 blue. We glue the finished eyes and insert the spout (the detail of the children's mosaic). Santa Claus from paper in the technique of modular origami is ready. We hope that after studying the master class, a snow maiden, made in the same technique, will appear next to your Santa Claus.

Santa Claus from paper in Origami technique - master class

We will need colored paper and some patience. We offer you several schemes for which you can easily make Santa Claus with your skillful hands. You can hang it on the Christmas tree, decorate the greeting card to them or give it to friends for the New Year.

Santa Claus with her hands from colored paper - master class

We will need: red paper, pink for face, white beard paper, wool, markers, scissors and glue.

Operating procedure:

With the help of a circulation or a small plate of blacks on red paper semicircle. Cut it out, fold into the cone and glue.
Cut from pink paper oval, draw on it a felt-tip pen of the eye and nose and glue the face of Santa Claus to the cone.
Next we glue the beard and a cap from white paper. To do this, cut out white stripes, cut the fringe on them and tighten it with scissors. We glue the strips with a swirling fringe to a cone at the bottom of the face in several rows, giving a beard of pomp. From the same strip we make a hat. Beard, a hat and a fur coat for Santa Claus can be made of cotton, which is glued to the cone along its lower edge, on the face and top of the cone. Elegant Santa Claus made of paper, made with your own hands, ready. With the help of a cone, applying fantasy, you can make a snow maiden.

Santa Claus From Colored Paper Striped - Master Class

We will need: dense colored paper, white corrugated cardboard, scissors and glue.

Operating procedure:

Cut from red paper 6 strips with a size of 1 cm for 15 cm and 6 strips of 1 cm in size by 10 cm. Glue them into rings. Of the 6 large rings we collect a ball, fastening it with glue in the upper and bottom. Of the little rings along the same scheme we collect a smaller ball. It turned out torso and head of Santa Claus.
From pink or orange paper cut out a small face for face. Cut out the arbitrary size of a mustache, beard and a hat from corrugated cardboard and make them face. Cut and glue your eyes and nose. We glue your face to a small ball, which is then glued to the body. Cut from cardboard mittens and boots and glue to the craft. The symbol of the new year of paper, created by their own hands, is ready.

A few more ideas for creating a ship of Claus do it yourself.

Applying the fantasy and using the schemes offered by us, you can make Santa Claus, even from a paper napkin.

Paper cone allows you to make many options for Santa Claus with your own hands.

And this family of santa frost is made of ordinary sleeves from toilet paper.

Santa Claus and Snow Maiden in popular modular origami technology.

We hope that our master classes helped you understand the technique of making Santa Claus from paper and combined to work. Attach a little fantasy and create your own kind grandfather or even a few. They will decorate your holiday and create a magical mood!

Schemes, Prints, Pictures

Olga Malafeev

Material: Ceiling tiles, construction glue, knife, wool, plastic bottle of yogurt, old doll (Pups, red fabric, drink tube, tinsel, white yarn, cardboard box.

Initially, invent the plot. From paper I make templates of the desired size and cut out from the tile parts.

Blooming with the help of construction glue. You can use "Titan", but it dries long.

The box will cut the upper part, leave only the bottom with low sidelights,

purchasing cotton. Here I use PVA glue.

With the help of the construction glue, I fix the figures based on.

For grandfather Frost. I used an empty bottle from the yogurt, the details from the old pupse (head, hands, red fabric, cotton wool, white yarn. For a drink, a tube for drinking, tinsel, flower tape.

Now I create a plot. I install the grandfather Frost., Sani bag with gifts And we decorate the Christmas tree with multi-colored beads.

Hush hush!

Grandfather Frost We are going to the holiday.

He is lucky gifts in

Everyone, everything, in the world!

Happy New Year, dear colleagues!

Publications on the topic:

The new year is getting closer, care is more and more, we need to think about it, and to prepare for the holiday, and take care of costumes. And here also.

I invite all colleagues and friends to the master class "Santa Claus" - South Origami, who will show you Susanna. For work, we need a sheet color.

Master class "Santa Claus". Hello, dear colleagues, parents and children. Soon the new year, and all are waiting for the miracle and Santa Claus. Expensive.

Master class "Santa Claus from Ladoshek" prepared: Maslova N. V. To work, we need: Color paper glue white paper, for cutting.

Doll "Santa Claus", made by her own hands, will bring a holiday to any house. And it does not matter, you believe or not in the magic grandfather with a bunch of gifts.

Soon, soon a fun holiday New Year! Christmas tree, rain, tangerines and, of course, Grandfather Frost with gifts! Dear colleagues, I suggest yours.

Decoration of the group: "Our favorite Santa Claus!". Good day colleagues! Already coming soon the new year comes. I would like to share with you like us.

The beautiful figure of Santa Claus, made on our master classes with photos and videos, is suitable for submitting to the contest and decorating your home for the new year. For adults and small handicrafts, we collected a lot of instructions for tailoring toys from fabric and felt, salty dough laying, assembling from a plastic bottle, paper or cardboard. Step-by-step master classes will be understood by children from school and kindergarten and can easily make it their hands Santa Claus from various purchased and girlfriends.

Santa Claus with her hands from improvised materials to kindergarten - step-by-step master class with photos

Using different sweater materials and fabric you can easily make a pretty Figure Figure Frost to the New Year. For the smallest handicrafts, we picked up an interesting instruction telling about the rules for making such a craft. More details to learn about how to make it step by step to make out of the girlfriend in kindergarten of a pretty Santa Claus, our next master class with a photo will tell.

Materials for making for kindergarten Santa Claus do it yourself

multicolored felt;
silicone glue;
bank from under juice or cardboard roll from toilet paper (for base);
lace;
red and white pumps;
scissors.

Master class on making with their own hands Santa Claus from girlfriend

Prepare materials for work.

The size of the stuck cylinder is cut from the red felt rectangle.

Glue the red felt to the base.

From light pink felt cut a large face for future figures and glue with glue, as shown in the photo.

Lace decorate faces: gluing lace along the contour of the light pink felt.

From the black felt cut a couple of eye mugs. Glit mugs and red pompon-nose. From the pink felt cut a couple of cheek mugs, from red - smile.

Glue the cheek and smile figure.

Cut from a red felt triangle, as shown in the photo. To glue the triangle edges to obtain a cone cap. Glit white pompon from above. Then glue the cap to the previously harvested figure.

Volumetric Santa Claus with their own hands from Kapron Tights - Master Class with Video

A funny cracker in the form of a Frost's grandfather can be made using ordinary categories. Of these, interesting bulk figures are obtained, which can be submitted to contests or use to decorate their home on the eve of the New Year. To learn more about how to make your own hands from the Konron Tights of the Beautiful Santa Claus, our step-by-step master class will tell.

Master class with video manufacturing with their own hands from Kontaic Tights Santa Claus

In the next video, the stages of manufacturing a bulk toy from pantyhose are considered in detail. It is important to follow all instructions of the author, then the obtained handicraft will be beautiful and neat. You can use the finished figurine to decorate the rooms for the new year or just put under the Christmas tree.

Funny Santa Claus with their own hands from plastic bottle and spoons - master classes for kindergarten

Parking, painting plastic bottles is a fairly simple task with which the student of the middle and older kindergarten group will easily cope. Therefore, for babies and their parents, we picked up interesting workshops for the new year to make crafts from such simple girlfriends. In the next photo instructions, you will learn how to easily and quickly make a large figure of one of the main symbols of the new year. On our master class, Santa Claus from a plastic bottle and spoons is made with their own hands without much difficulties.

Materials for the manufacture of cool Santa Claus from plastic bottle and spoons

large plastic bottle of 5 l;
plastic spoons;
scissors;
white and red tape;
glue pistol;
rain;
circle of pink fabric;
wool;
white cardboard and black paper.

Master class with a photo of manufacturing with their hands Grandfather from a bottle and spoons

Start a five-liter bottle with red and white scotch.

White scotch, attach the front central part, as shown in the photo.

Red scotch tape make a neat frame of the previously glued white scotch. Also attach red scotch all the backs of the made figurine.

Plastic spoons trim sticks. Start gluing the obtained billets on a five-liter bottle with a glue gun. Plug, so the lid and make a strip of spoons on the neck.

Print blanks from spoons to the bottom of the bottle (under the white scotch).

At the bottom of the bottle, glue the billets of spoons into several tiers, as shown in the photo (so that the bottle itself is not visible).

From white cardboard and black paper make eyes for figures.

Of the pink fabric, make a spout, filled with cotton.

From pieces of pens from plastic spoons to make brings for figures. Printed eyes and throws on a prepared plastic bottle.

Decorate the bottle of rain.

Video for making your hands cool santa frost from plastic bottle

More simple, but no less cool feature you and your children will be able to do according to the next workshop. A detailed video will tell about how from an ordinary plastic bottle to make for the new year of the cool grandfather Frost. The bulk exercise can be used to decorate the room, and you can also put it under the Christmas tree. The original figure is suitable for participating in the competition at school or kindergarten.

Original Santa Claus from wool do-it-yourself - master class with video for school

From ordinary wool in the USSR there was a large number of toys. At the same time, they were not just beautiful, he and very original. Now using this technology, you can also make an unusual decor to the new year. And with the help of our next master class with the video you will learn to make your hands the cool Santa Claus from Wat.

Video on self-making from Vat Santa Claus do it yourself - for school

Following the instructions of the author in the next video, you can easily make a real toy from ordinary wool for the new year. The finished figure can be painted with paints or covered with varnish. Such an exercise will look original and bright against the background of modern purchased toys. In addition, it can be used not only to decorate rooms, but also for decorating the Christmas tree: put under the Christmas tree, Grandfather Frost and Snow Maido from Wat and create a real festive atmosphere of the New Year.

Simple Santa Claus with their hands from paper and cardboard - Templates for kindergarten and school

From ordinary cardboard and paper, it is easy and simple to make many different figures of the Frost's grandfather. In this you and your children will be helped by the patterns selected by us. You only need to print them, and then proceed to cutting and gluing the figures. And literally in 10 minutes a beautiful handicraft for the new year will be ready. Choose a template for cutting with your hands from paper or cardboard Bright Santa Claus you can in our collection of pictures.

Collection of templates for paper and cardboard with Santa Claus for elementary school and kindergarten

We have proposed templates for cutting can be used both at home and for kindergarten or elementary school. From simple billets, children will be able to independently do cool and pretty grandparents. Also, such an original craft together with the baby from the younger group of kindergarten, you can submit to the exhibition held in honor of the New Year.

Original Santa Claus with her hands from fabric and wool very simple - patterns for beginners

Sewing volumetric figures and toys requires certain skills to work with tissues and sewing machine. But in our next master class you will find the most simple master class on making a toy from the fabric. In it, the main task of the needlewoman will be a neat redrawing of the workpiece based on the basis and its bright coloring. To learn more about how with your own hands it is very easy to sew a Santa Claus from fabrics and wool, you can in our next workshop with patterns for beginners.

Materials for tailoring with your own hands of the original Santa Claus from fabric and wool

linen or cotton fabric;
paints for drawing on the fabric;
paper (for printing outs);
cotton wool or holofiber;
scissors.

Master class on independent sewing from fabric and wool original Santa Claus

Print the proposed patterns, transfer the contours of the figure (or both figures on the fabric). To transfer both the drawing itself for the manufacture of original suspension toys.

Coloring the front part of the figure with fabrics.

Make the back of the figures: re-redraw the contour (turning the pattern) and paint the colors on the fabric.

Make the bottom of the toys and paint them, as shown in the photo.

Cut blanks with an indent of 1-1.5 cm.

Fold the workpieces with the front parts and sew them using a sewing machine or manually. Additionally sew a ribbon or decorative lace for hanging the figure.

Remove the workpiece.

Send the bottom of the toy (not completely - half).

Fill the toy with cotton or holofiber.

Snake the second half of the bottom of the toy.

Video on the sewing from the felt of the original Frost Grandfather - with patterns for beginners

Sewing another grandfather to decorate the house for the new year will also help you and the following video. In it, step by step tells how novice craftsmen make a simple toy. The patterns proposed in it are quite easily redrawn, so even students of the middle and older school will be able to make a crawler.

Funny Santa Claus from salt dough with their own hands - master classes with photos and videos

From salt dough you can make a lot of different cool crafts. Such work will definitely enjoy the kids from the kindergarten, and students of primary classes. And with our next instruction, you can make original pendants with painted prints with your own children. A simple master class with a photo will help you easily and easily create your original Santa Claus from a salt dough.

Materials for self-making funny Santa Claus from salt dough

flour - 2 glasses;
small salt - 1 cup;
water is about 1 cup;
rast. oil - 1 tbsp.;
foil;
acrylic paints.

Master class with a photo of making salted dough with their own hands Grandfather

Prepare everything for the manufacture of salt dough. Mix ingredients and thoroughly knead to obtain a homogeneous mass.

Prepared salt dough roll out into a subtle formation (not thicker 2 cm). Cut from it small ovals or circles (kids handle placed and a neat side remains).

Make on the surface of salt test prints.

Carefully cut down the extra dough, leave near the print side of about 1 cm near the print. At the top of the workpiece to make the hole with a hole for the subsequent fracture of the cord or tape.

Share the blanks on the foil and put it in the oven. Bake crafts at a temperature of 120 degrees for 2 hours.

Coloring the workpiece of white paint and give it to dry. Then draw the face of the grandfather Frost, his beard. Rent through the harder-hardened hole with a tape or lace.

Video on the independent making of a salted dough grandfather

The bulk figurine in the form of a Frost's grandfather your children can make both the next workshop. Step-by-step video will help them create a very cool New Year's craft. It can be used to decorate the house for the new year or to decorate the class at school, kindergarten. Simple and fascinating work with a salt dough will definitely enjoy all children.

Bright Santa Claus with her hands for kindergarten - crafts for exhibition on master classes

In the manufacture of crafts, together with the child, it is not necessary to use only infringement materials. For example, in the next workshop, a wooden workpiece in the shape of a man is used as a basis. You can buy it easily in modern shops for needlewomen. The figure itself with such a workpiece turns out quite easily and simply, so the work itself will enjoy every child. About how to make a bright and cool craft for the new year in the form of Santa Claus with its own for the exhibition in kindergarten, you will tell you the next master class.

Materials for the manufacture of bright sheds of frosts for the exhibition in kindergarten

wooden blanks "Men";
acrylic paints;
yarn for felting (can be replaced by sintepsum);
white and red felt;
silicone glue;
scissors.

Master class with photos of bright crafts in the form of Santa Claus to the exhibition in kindergarten

Coloring the body of a wooden billet in red.

Wait for drying the workpiece.

From yarn for felting or syntheps, make a hair figurine and beard.

Take a trickle billet belt and buckle. Glue hair and beard with silicone glue.

Draw a film figurine.

Cut the triangle from the red felt.

Sew (or glue) from it with a hat.

From white felt cut thin strip. Glue it to the hat as a framing.

Wear a hat on the finished figure.

Video manufacturing video in the garden Bright crafts of Santa Claus

Alone to make bright crafts in the form of a Frost's grandfather, it is from other materials. For example, a very interesting cracker for the new year, children together with parents can make from ordinary light bulbs. At the same time, such blanks can be painted with different colors, and you can also make various clothes and decor for them. But it is necessary to carry out such work only with adults.

Big Santa Claus from a fabric with their own hands to school on the competition - step-by-step master class

It will help you with our next master class on the competition to the school of great and beautiful Santa Claus with your own hands. Make a toy calendar easily will be able to students of high schools. But the guys, students in high school, such work will be quite complicated and in the manufacture of toys they must help parents. Stitched by our exercise, the exercise by the new year is very easy and simply will help your children to take prizes.

Materials for the manufacture of fabric grandfather frost at the competition in school

cut red and black fabric;
sewing supplies;
white felt and ready-made white felt digits;
linen or cotton fabric of physical or light gray, light pink.

Master class with photo sewing grandparents with their own hands on the competition for school

Cut out the tissue with a strip with a width of 11 cm and about 100 cm long. Take carefully on one side to eliminate the tissue satting: to turn it on 1 cm and repeat the odd, leaving the edge inside. Fit the workpiece. Make folds, as shown in the bottom photo: retreat from the edge of 4-5 cm, turn the cloth under the bottom, making a fold of 2 cm. Repeat the operation until the end of the cut. All flavored bends should stroke.

Folded folds on top to fix stationery cloves, and at the bottom of the pins.

Sew details together and turn off the workpiece.

Cut another big triangle, to sew finished handles and legs.

Creap the front and back of the workpiece.

Flash the connected details. And then sew your head. On the pockets themselves glue felt numbers (make a calendar).

Using our master classes with photos and videos, you and your children will be able to make your own hands Santa Claus from different submitted materials: paper, cardboard, plastic bottle. We also picked up simple instructions for sewing toys from fabric and felt with patterns. They will tell how to make a figure of Santa Claus for a competition to school and kindergarten, as well as what decor can be made to decorate your home for the new year.

New Year already on the threshold! Do you feel like in the air, the spirit of magic and nascent miracles are hidden?

And by the way, you yourself can participate in the creation of a miracle - to sew your own Santa Claus under the New Year's Christmas tree!

After all, every child and even adult people are secretly waiting for a good wizard for the battle of Kurats to bring a bag of gifts and a whole oha of happiness.

So, for our work, we will need the following materials and tools:

X / b white or beige fabric for the base of the body
X / b Multicolored fabric for pants, cap and mittens
Fleece of two colors (white and red)
Felt for appliqué
Hollofiber for stuffing and a piece of lining syntheps
Wool for felting (ribbon)
Porolon for shoes
Threads Moulin, Buttons, Beads, Beads for Decor
Wire thick, well holding shape, and thin copper
Tight cardboard
Acrylic paints, brushes
Needle for felting
Pliers, wires for wire, stationery knife
Adhesive gun, glue "Moment-crystal"

1. Preparing pattern. Initially, we are determined with the diameter of the bottom of the cone and its desired height and, on the basis of this, in any convenient way to build a scan. Formulas for calculating and ways to build easily found on the Internet. Hands pattern draw arbitrarily.

2. Cut from dense cardboard a circle, spend through its center a line that divided into three equal segments. On their joints cut hole holes. We apply a synthetic circle and a circle of colored fabric slightly larger diameter. We are tightening the cloth around the cardboard.

3. Thick wire bend P-figuratively, pushing it through the holes in the cardboard, sintepon and fabric. Wire ends bend in "Ankles" and make the "feet". We screw the thin copper wire longer to the jumper than the height of the cone, about 10 centimeters.

4. Important! We carefully glue the wire to the cardboard and sample the wire joint. At this stage, the design should be well balanced and stable, the cardboard should not fall down the wire!

5. From colored tissue, we cut out two rectangles with a length of about one and a half times the length of the legs and a width of about 4 centimeters. We put along in half, we flash, turn it out. We stretch on the legs and sew to the bottom of the secret seam.

6. From cotton carcini for the torso, we cut the cone scan. We fold in half and flash around the edge, leaving the last couple of millimeters in the top of the top. Penitate the edge around the circumference, hover. Soak the resulting cone from the fabric.

7. We put on a thin wire cone, withdrawing its free end through a hole on the top. Pick up a hollofiber torso. Watch that during the wires of the wire remained at about the center of the cone. We sew a fitted edge of the body around the circumference to the bottom of the secret seam.

8. From the cardboard cut out the soles. Draw them arbitrarily, the main thing is that it is a little longer behind and in front than wire loops. We glue the soles to the wire with a thermoclaster, following their stability.

9. Cut with the help of scissors and a stationery knife "Boots" from the foam rubber. Cut from below the recess for the wire and cut the rear of the slit in order to insert the "ankles" into it. It is more important not accuracy, but the symmetry of the "boot". We glue the foam rubber.

10. Cut from the red fleece two oval of this size so that it was enough to cover the porolone "boots" with a slight margin. One of the elongated vertices oval cut the sector in the form of a triangle, we put the fleece on the foam rubber, we sew the backdrop of the secret seam and tighten the fleece around the cardboard sole.

11. From the felt of the appropriate color, we also cut two oval with a size of a little more than a cardboard sole. Do not cover the felt to the sole of a thermoclaster, cut down too much, we enhance the felt to the fluxe of the secret seam.

12. We plan on the torso approximate lines of the top of the jackets and the bottom of the cap. Between them there will be a person. From the fabric cut out a small circle, we put the ball of synthesis inside the ball, we are tightened along the edge. It turns out the nose that needs to be sewn on the face of a secret seam.

13. Bashed face with white acrylic paint. We try not to go too much to the territory of future beards and hair, so that there are no difficulties with their admission in the future. What exactly to draw face is the case of your taste and fantasy.

14. We cut the jacket in the form of a truncated cone from a red fleece, we fold on the edge, turn out. From the fleece and colored fabric sewing the knobs in the mittens, leaving the holes for packing, turning, stitching, sewing the holes with a secret seam.

15. We stretch the jacket on the torso, sew bottom and the neck of the secret seam. Temporarily pour the handles in order to smoothly distribute the application. Cut the parts from the felt, we rush to the body, we finally think over the arrangement of the composition.

16. The details of the appliqués first fix the "moment" drop on the fleece, so that they do not shift, and only then sew. Optionally, use buttons, beads, beads, decorative elements. We sew secret seams of the ribbon "snowdrifts" from a white fleece.

17. From the white fleece, we cut out the tensions of the shoe and cuffs, fold in half, stitch along the edge. We stretch on the handles and legs, sew manually.

18. By the same principle of cutting collar sewing. To maintain the "snowfall" style edge of the collar, cuff, shutter boots and a cap can be made wavy.

19. Send the handles to the body with a solid thread with a button-molding. Thread slightly tighten, tie the knot and sample it for the strength of the "moment" glue.

20. From the comb ribbon, we tear about 10 centimeters of wool, we collect it in a bundle of the desired thickness and thoroughly admit a needle to felting like a beard. Then we tear off the wool bundle 2 times thinner and about 20 centimeters long, we apart in the middle under your nose like a mustache.

21. We tear two more wool bundles, along the length and thickness of equal beard, we apart from both sides of the face. The reverse side of the needle for filling carefully comb and lay the wool into the salary beard.

22. Also exercise and form a hairstyle on the sides and on the back of the head. If you need, you can hang a little scissors and sprinkle with ordinary hair varnish so that the wool does not fluff out.

23. Based on half of the cone, we cut out of the colored fabric strongly elongated and the fastened cap. The height of the cap must correspond to the length of the free end of the wire plus 1-2 centimeters for freedom of bends. We flash the items, leaving the top open.

24. Soak the cap, we put it on the head, pulling the wire through the top hole, sew along the edge to the head. The end of the wire bending the loop. Send a white fleece and pompon, hiding in it the end of the wire.

25. Santa Claus is almost ready. If necessary, add the decor, completing the image. If you want, you can additionally sew a bag with gifts, a Christmas tree or, for example, a couple of year.

Santa Claus is ready! More than you real miracles!

Want to give a new year a great souvenir made with your own hands? Are you planning to master the manufacture of the original home decor on the eve of the new year? Or maybe you want to learn how to make home toys together with children? If at least one of these questions you answered in the affirmative, then you will certainly be read by our today's article. In it, we have collected very simple step-by-step workshops with photos and videos that will help you master the manufacture of Face Figurine Claus from Primary Materials. Agree, Santa Claus with her own hands is a wonderful gift, and the original decor and a fun toy in one "bottle". Santa Claus costume can be sewn around the pattern, and make it a figurine from unnecessary things, such as kapron tights, or made of paper, bottles. Even a conventional plastic cup can be taken as the basis of Santa Claus with their own hands, and his beard will be built out of cotton. The main thing is to show fantasy and make a little effort - and the thematic souvenir for the new year 2017 will be ready!

How to make Santa Claus from handicraft materials with their own hands, master class with photo

We offer your first to your attention a master class with a photo, how to make Santa Claus with their own hands from girlfriend. A very simple and affordable items will perform in the role of infringement materials: egg shell, paper, cotton wool. As a result, a very original figure of Santa Claus, which can be supplied or simply put under the Christmas tree will be obtained from such an uncomfortable set. Instructions, how to make Santa Claus from handicraft materials with their own hands in the master class below.

Necessary materials to make Santa Claus do it yourself

paper napkins
watercolor
a pen
paper red

Instructions for a master class, how to make Santa Claus from handicraft materials with their own hands

We take a raw egg and with the help of a knife we \u200b\u200bmake a small deepening from above. Gently pour the contents of the egg to the plate, trying not to damage the shell. It will be the basis for the body of Santa Claus.
Thoroughly my egg from the inside and outside under running water. We try not to damage the integrity of the shell.
Let the workpiece completely dry. Then we need to strengthen the base of the figure. Therefore, infeating the shell of the layer of glue and on top pinning pieces of torn paper napkin. Let me dry a little, and again we apply a layer of glue and napkins. At the same time, the hole through which we poured yolk and protein, we also close with napkins.
From the red paper, we make a blank clothing of Santa Claus. To do this, cut out one wide strip, the length of which will correspond to the diameter of the widest part of the shell. Also cut the semicircle with the base equal to the diameter of the upper part of the egg.
We take a paper strip and wipe it inner with glue. We glue in the middle of the workpiece.
From the semicircle we form a cone and glue it.
We give the cone the shape of the Santa Claus caps and glue to the top of the workpiece.
Add the header of Santa Claus Pompon from a small cotton ball.
We take cotton and roll long strips from small pieces. With their help, decorate the base of the header and the fur coat of Santa Claus, sticking onto the glue.
Beige watercolor paint paint empty space - the face of Santa Claus.
After complete drying, the paint is drawn by a gel handle or a felt-tip pen face the face of the grandfather of frost.

Original Toy Santa Claus from Capron Tights With Your Hands, Master Class

And you knew that from ordinary kapron tights you can make your own hands the original toy, for example, Santa Claus? Such a toy is very funny and it can easily be given to a new year to a child or an adult. True, to make the original toy of Santa Claus with their own hands from the kapron tights, it is desirable to possess at least minimal sewing skills and needlework. Therefore, if you are not friends with threads and needles, you first practice on the sewing parts of the body of the doll.

Materials for the toy Santa Claus from Kapron Tights with their own hands

capron tights
porolon
velvet red fabric
threads and needle
termoklay
artificial White Fur
foam ball
roll of cardboard
buttons, pins
paper

Instructions for Master class of Santa Claus from Kapron Tights do it yourself

To begin with, we make blanks for the body of Santa Claus. To do this, take the cardboard sleeve from the paper towel and glue it with two layers of the synthetic procession. The length of the synthet should exceed the roll of approximately 1/3 of its length.
After drying, we tie the foam rubber in the place where the sleeve ends. Inside put a foam ball and glue the free edges of the foam rubber, so that the round is the round.
We stretch on the basis of the basis of a light piping stocking and tie tensely thread at the bottom of the neck toy.
From below, free space in the cardboard sleeve fill in a crumpled newspaper paper. Then we cross the free edges of the Capron and glue the cardboard circle to the base.
We take several sewing pins and with their help, proceed to the formation of the features of the face. In order to make the nose, fix two pins in the middle with a slight gap. Then, we flash the locations of the clips to the thread so that it is necessary to give the desired volume of the nose. In addition, the principle form the cheeks and chin of Santa Claus. Instead of eyes, sew small buttons or beads.
Two small pieces of foam rubber we turn into two rolls and glue. Then we wrap the workpiece into the fabric and flash. We also form large mittens from the foam rubber and fabric, decorate the fur.
From the red velvet fabric, cut the rectangle, which will be the basis for Santa Claus fur coat. Send it to the base toys. We glue a strip of fur in front. Also made from fur and finish Santa Claus cohesion from below.
Send your hands to the body of Santa Claus. From the remains of the fabric and fur we sew a hat and glue it to the head.
Fur remnants cut with scissors and glit to a piece of capron cone-shaped. Let me dry, dry, and glit on your face - it will be a beard of Santa Claus. At will, decorating a fur coat with snowflakes, sequins, beads, make a bag for gifts with your own hands.

Bright decor for the new year Santa Claus from plastic bottle with their own hands, master class

An ordinary plastic bottle can become a bright decor for the new year, if you make a south frost from it with your own hands. Our next master class is very simple in performance, so it can be realized in reality with children. For details on how to make a bright decor of Santa Claus from a plastic bottle and breeding materials for the new year, read next year.

Required materials for Santa Claus from plastic bottle do it yourself

plastic bottle
gouache and brush
black and White Fleece
termoklay
colored paper
faux fur
plastic ball
cover from shampoo

Instructions for a master class, how to make Santa Claus from a plastic bottle with their own hands

To begin with, we remove the label and well my bottle outside and inside.
Then we take the red gouache and paint the bottle and the lid from the shampoo. Let give a completely dry.
In the meantime, we cut out of the white fleece from the white fleece: one length in the height of the bottle, and the second must match its width. We glue - one vertically in the middle of the bottle, and the second bottom horizontally.
From a black fleece, we make a belt, and buckle cut out of colored paper. We glue in the middle of the bottle.
Plastic ball gluing a bottle neck. From cotton or artificial fur we make a beard Santa Claus. From the beads we make your nose and eyes.
Cover from shampoo from below glue with cotton and fix the resulting hat with glue. Santa Claus from plastic bottle and girlfriend with their own hands - ready!

How to make Santa Claus from a cup do it yourself, video

Santa Claus with her hands from the primary materials - a universal souvenir, which can be made even from a plastic cup. As well as similar options for master classes of sheds of frosts from paper, kapron tights and plastic bottles, the next master class with video is most simple as possible. Beard and costume for Santa Claus from a cup with their own hands, of course, made from traditional wool and fabric, which can also be replaced by paper. There is no challenging pattern in this video, so children will also be asked such a crawl. For details on how to make the original Santa Claus from the cup, see your hands in the video below.