Traditional and original ways to shake a hole on knitted things. How to sew jeans to be unnoticed: useful tips how to sew a hole on the sweatshirt

Any clothing from our wardrobe can take place over time. The appearance of holes on the beloved thing makes it unsuitable for the sock. What to do? It is not necessary to throw it out for sure, you can try to reanimate it, because in the arsenal of real owners there are several ways how to return the work of the second life. In cases of the appearance of the hole to the aid, a needle will come with a thread, a sewing machine or a patch. Most often, the holes appear on trousers in as a result of scuffs from frequent wearing, it is also possible by chance or other clothes clinging for a sharp object or when falling that it is typical of children with active games. Only large holes in a prominent place are poorly repaid, then, most likely, you will have to say goodbye to clothing. The appearance of a small hole on clothes is not so terrible, because having a needle with a thread, you can skillfully get rid of the hole that appeared.

The most practical and comfortable clothing, but in the process of long-term socks, they have the property of being climbing, where holes are formed on the site of scuffs. There are several ways to get rid of the hole on jeans: to sew with a needle with a thread, to sew with a patchwork or turn a hole into a fashionable slot. Show a little fantasy, and any hole can turn into a stylish trouser decoration. In order to reanimate torn jeans, you can use various accessories, in the form of lace, buttons, ribbons, patches.

If the hole appeared on the knee, it can be hidden using a patchwork. Before you need to pick up the color of the fabric, which will be harmoniously combined with the color of the trousers. Patch the right patch form that you can take from old jeans, it can be lighter or darker on the tone, the main thing that looked well. In addition to the correctly selected patchwork, you need to correctly pick up the threads that will look good on the background of patchwork and jeans. The poppip is sewn with a lower case on the edges of the hole.

If the hole appeared on the back pockets, it can be hidden by appliques that do not need to sew. It is enough to put the applique to the place of the hole and move the iron. You can buy appliqués in special stores.

It is much more difficult to hide the hole that appeared between the legs. Such a hole can be sewn or a sewing machine. If we use a sewing machine, then you need to make lines in the form of a zigzag, in cases where there are no cars, then such a hole is sewn from the inside, capturing only the edges. The seam should be dense and durable. Below will provide full instructions, how to properly sew holes.

How to fool holes correctly: instruction

• Take the needle and thread that will be harmoniously combined with the color of torn clothes. If the material of clothing is dense, then need a needle thoroughly.

• Clean the thread in the needle, you can use the threader if the needle's ear is too narrow.

• Tie knots on the end of the thread.

• Strip into the holes of the hole. It is necessary to sew from the outstanding of clothes, along the edges of the seam, while tightly tighten the thread.

• In the process of sewing, see from the back, how the seam looks like. After the hole is sewn, make the knot and cut the thread.

Before sewing a hole on clothes, you need to pick up the thread that will approach the color.

If suddenly your favorite jacket broke into the most prominent place, and you do not know what to do, read our article in which we will tell how to sew a hole on the jacket so that there is no visible. You can make a hole in an invisible in several ways, most of which are universal. Therefore, you should not be upset because of a torn thing, since the situation is not the most terrible and completely solved, even without the workshop service. Today we will tell you how to repair a broken jacket, depending on the material of the product and the type of opening.

The jacket broke down - what to do?

Unfortunately, the quality of the material from which the outerwear is manufactured is not always satisfactory, sometimes even a new jacket, from a minor hook can break. To correct the situation, you can use in simple ways:

• Sew (to shabby) gap.
• Pack.
• Disconnect with braid or reflective tape.
• Impose a patch.
• Use thermal blinds and applications.

Of course, the choice of a method of repair depends not only on the material, but also from the location of the brackets. Agree, you can use a beautiful sticker only where it is appropriate, and it's not quite aesthetically stitching a bologne jacket. Next, we will introduce you to various methods of repairing outerwear, depending on the type of damage and tell how to make a bologna jacket at home. And in order for the thing at all, there are a few more secrets. For example, you can.

How to close a hole on a jacket on the seam?

The easiest method of repair is used if the jacket broke through the seam. In this case, nothing needs to be invented, because such a hole can be sewn with threads. Moreover, such a gap can be eliminated even without a sewing machine.

The repair process looks simple enough:

1. Select threads suitable for color.
2. Remove the product inside out and spread on the table.
3. If there is a lining, then write it to it more convenient to work with a damaged area.
4. Sell \u200b\u200ba thread in the needle and carefully squeeze. Try to sew so that the new line is the continuation of the old one, and the seams as small as possible differ from the factory.
5. Slit lining and remove the product.

If you do not want to break the lining, then squeeze the hitch jacket. For this:

1. Stick the needle with the outfit of the fabric (so that the node can not be seen on the thread) and with the front side, bypass with parallel stitches.
2. Distances between stitches must be the same.
3. After the hole is completely sewn, secure the thread and gently hide it inside.

Important! To disguise the broken seam on the jacket will help braid or reflective tape. You can sew the braid in different ways. During the decor, fantasy will help you. Similarly, you can sew a manually invisible suture hole under the arm. Do not be afraid to experiment with color and length:

• Successfully selected braid, can not only disguise the torn seam, but also make a jacket stylish and original.
• And the reflective tape, sewn to the place of defect or across the width (length) of the jacket, will look not only effectively, but will make the product more noticeable in the dark.

And maybe the knife appeared is just a reason to give things a new life? We offer you some interesting and fashionable ideas:

How to "hide" to band under zipper?

If the cut on the smoke is located in the place where the lightning is quite relevant, then use the following method: Insert the zip in the damaged place.

Important! For symmetry, you can insert zipper and on the other hand. This option will not only save the thing, but also give her a kind of originality.

To the torn jacket looked like a new, use the decorative buttons or rivets instead of zipper. To do this, close the spare piece of the fabric (usually sold together with the jacket) rubbing and run it with buttons. As a result, it will be a decorative element.

If you have a wardrobe, there is not one demi-season top item, but also high-quality, but not quite fashionable leather jackets, we will tell.

Repair of bologna jacket

Sealing artificial fabric - Bologna, made of polymeric threads treated with water repellent and airtight composition. Bologna jackets are perfectly protected from rain and raw fog, so perfectly suitable for a picnic and tourist.

Important! Invented the rubberized material Italian engineer Julio Natta, and the tissue received its name, thanks to the Italian city of Bologna, in which the inventor lived.

Clothing from Bologna has long gained popularity in many nations, as it is indispensable in the wet and cold season. Unfortunately, the rubberized fabric is not as high-strength on the gap, as I would like, therefore, it is necessary to hold the owners of such clothes, it is often necessary to solve the question of how to put a patch outside on a smoke from Bologna, because the material is not so easy to sew. And the causes of damage to clothing can be plentious:

• Burn a cigarette or hot object.
• Cut (blade or acute subject).
• Hooks from an acute subject, for example, nail.

Materials for work

In order to repair a polyester jacket with their own hands, you may need the following materials:

• Glue "Super moment" or KP-1.
• Acetone or gasoline for degreasing.
• A piece of fabric on a piping suitable in color.
• Polyethylene or Flizelin.
• Applique.
• Iron.
• Marley or soft natural fabric.

Light and comfortable jacket from Bologna can be sealed in several ways using the above materials. Consider in detail every method of solving the problem.

Method number 1. Repair with a patchwork of fabric

In order to flush the band, prepare suitable in size, texture and color piece of fabric and glue.

Act as follows:

1. Remove the product inside out and decompose on a flat surface.
2. Declaring the place of break from the wrong side with acetone or gasoline.
3. Apply the glue "Supermoment" (KP-1) thin layer on a patchwork cloth.
4. Couple neatly and smooth edges of the cutter.
5. Verify the patch.
6. Place the repairs for the press for a few minutes (according to the instructions of the glue used).
7. Remove the jacket and appreciate the result of the work. If the front side of the rupture of the break is visible, then disguise them with the help of an embroidered applique, which is sold in stores for sewing and needlework.

Important! If a sports jacket broke, the location of the rupture can be sealed with thematic inscriptions or pictures. You can also apply inner seams and thus sew a broken place on the jacket.

Method number 2. We use polyethylene or phlizelin

To make a jacket made of polyester, prepare: a special ribbon of dry glue (fliseline), a piece of fabric, suitable in color, iron and gauze.

Important! Instead of Flizelina, you can use the usual cellophane.

Step-by-step instruction:

1. Remove the product and decompose it on the table.
2. Write the lining to get to the place of the core.
3. Cut a piece of polyethylene or fliseline in size just less than patchwork.
4. Carefully connect the edges of the rupture.
5. Attach polyethylene (fliseline) from the offline and carefully crumple it.
6. On the phlizelin (cellophane) from above, impose a patch from the fabric.
7. Bind the place of connection with the iron using gauze or soft fabric. Polyethylene melts and reliably fix the patch.
8. Remove the product and admire the result.

Of course, the line can be visible on the rupture line, but it is not scary, because you will know only about it, and for the surrounding line will not be visible.

Repair of a burned hole

Regardless of the cause of the burden, the hole must be eliminated. The problem can be solved in several ways, depending on the size and style of the product, as well as on the volume of the cutters. Here are some options for solving the problem:

• If there are various rivets, embroidery or patterns on clothes, then at the problematic accessories, suitable style of clothing.
• If a whole hole appeared on the product surface, then disguise it with the help of patches from two sides (facial and invalid) and stripes suitable for color, shape and style. First glue one piece of fabric from the wrong side, and the second cloth flashers cut a little more holes. Stick the patch from the front side. Disguise the latch with a stripe or applique. For symmetry, you can make stripes and in another place of clothing.

As you can see, there are many ways to "give the second life" beloved jacket. Use the option you like, and wear an indispensable thing for a long time and with pleasure good luck!

You will need

• - Rutch for ducts;
• - thin synthetic threads;
• - needle for sewing;
• - Embroidery needle;
• - mushroom for ducting;
• - Little sharp scissors.

Instruction

Get the basic sewing set. You will need a set of threads of different thickness and structure, needles, a wooden mushroom for a duct, which can be with a light bulb or a special cutting device with an elevated illumination.

Most often it falls, stockings and other casual knitwear. Having found on the sock, pick up the ribs for the duct - they are more voluminous and soft. Select the appropriate color, remove the sock inside out, pull it onto a wooden mushroom or light bulb and start a duct.

For a start, cut into sharp scissors sticking threads. Walk to the "forward needle" seam by the perimeter of the hole, retreating from its edge by 2-3 millimeters. Slightly pull the thread, seaming the fabric. Secure seam with several small stitches. Run parallel stitches from one side of the hole to so that the thread is stretched through the hole.

Start a cutter with small stitches, capturing the edge of the fabric and laid threads. Enter the needle from one edge of the needle to another and back. Thus, position how much rows, overlapping one series of stitches on top of another. Make sure that the dysnity of the duct does not exceed the thickness of the tissue itself. Do not tighten the seams, stitches must go free.

Thin tights and stockings are sewn otherwise. Pick up thin synthetic threads in the color of the canvas. Remove the damaged stocking on the duct mushroom, find the navalized loop, picker it with a needle and secure several small stitches. So do with all the detected loops. If this is not done, the hole or the "arrow" will increase.

Small holes can be simply torn by paving several dense stitches through the hole. After that, lock the seam by making several small stitches in one place and knotting on the thread of the nodule.
"Arrow" stitch, putting small oblique stitches through it and tightening the thread. Do not pull too much, the seam should not be wrinkled and collected in the folds.

Similarly, you can also sew knitted knitwear - scarf, mittens or sweater. For volumetric knitwear, thick threads are needed in tone and needle with a blunt tip (for example, embroidery). The perfect choice is a thread, of which the product itself is connected.

Sewing cuts on the fabric, use another way. Roll into the affected area, in a needle of the thread of the required color in needle and pave along the cut of a number of small stitches with a "forward needle". Thus, you will lock the edges of the fabric and prevent it from squeezing.

As you work with an invalid of things, time from time to time inspect the front side by checking how the seam will look like. Run the glad of small stitches perpendicular to cut, without tightening the fabric. Stitches put in parallel to each other. Secure the seam and swallow it with an iron. If the threads are chosen correctly, the seam will be almost impaired.

Sometimes one small hole on clothes can spoil the thing forever and make it unsuitable for wearing. But sometimes the thread with a needle and other remedies still saves the situation when used by their use. How to sew a hole on different clothes, "let's tell about it below.

Get rid of holes on jeans

Not afraid of mistaken, let's say that jeans are in the wardrobe of every person. They became an indispensable element of clothing. Jeans are comfortable and practical, but you can easily break them, clinging for a sharp corner or falling. In the end, your favorite jeans come into disrepair simply from time to time.

Now consider different options for how to sew a hole on jeans. If the hole was formed in a prominent place, let's say on the knee, then you can get rid of it by putting a patch. The main thing is to choose the color of the fabric, so that it harmonies with the color of jeans, then the patch will look stylish and fashionable. Before you put a patch, the hole will need to give the correct form. The size of the patch itself should be a little more of the resulting hole. Pick up threads that would look imperceptible against the background of the color of jeans. Sew the patch must be strictly seam along the edge of the hole. Then the edges of the denim hole can be slightly swallowed.

The hole on the rear pockets of jeans can be removed by applique. You can choose it yourself and cut out of any favorite fabric, and you can purchase special stylish thermoapplication in the store. A simple application will need to secure small stitches, sewing it to jeans. The situation is much simpler: it is enough to simply stroke the applique imposed on the hole, the hot iron.

Often there is a question of how to sew a hole between the legs. Make it easy, especially if you or your friends know how to use a sewing machine. Using a stitching in the form of a zigzag, you can make a hole imperceptible. If there is no sewing machine, you will have to cope yourself. It is necessary to sew with an inside, capturing only the edges of the hole. Seam should be dense and durable.

Remove the hole on a T-shirt

Holes on T-shirts can be the most different. Sometimes a T-shirt looks quite new, but small, barely noticeable, but still unpleasant holes appear on it. How to sew a hole on a T-shirt to be imperceptible? First you need to carefully choose a thread, it should be tone into the tone approaching the color of the T-shirt. Remove the T-shirt inside out and start stitching small holes alternately. In this case, as if you feel the hole to the center, with the front side this repair will look like a small point.

If the hole is rather big sizes, it will not come to sleep imperceptibly, the T-shirt turns. There are two options here: you can try to put a patch by applying the art duct. The purpose of such a patch is not to make a hole in inconspicuous, but on the contrary - to emphasize and allocate, make a semblance of a stylish print from a patchwork. And you can, as in the case of jeans, use the application or decorative sticker.

Things have a feature to break, so how to sew a hole and breathe in the product the second life - the topic is relevant. Some hostesses prefer to throw out worn clothes, instead of reanimate it. Moreover, every house has a miracle box with a needle and filaments of suitable color. Oddly enough, but most often pants from daily socks and regular machine washing. And there are cases when the hole appears unexpectedly, for example, as a result of hooks for acute angle or children's pranks. And now about everything else.

If the moms were not sewn the things of small ruins, but threw out how much money would have to spend money from the family budget to update the wardrobe. A small hole is easy to dust with a duct, but it is better to impose a patch on big torn places. Talk to this a little later.

The favorite thing of all generations is jeans. They are comfortable, practical, but quickly rubbing.

1. Normal gap. When the trouble occurred along the seam, the thing turn inside out. Carefully connect the opposite edges of the holes and fasten them with the help of a lower case sink. Upon completion of the work, it will be necessary to process the edges of the circulatory seam.
2. Darn. If it is not necessary to hide holes, it does not work, then they will have to shave them. We have a ribbon plot so that the contour of the product is stretched. This will suit the convex subject (light bulb, ball). The thing should be rotated by the front side to the seam. Threads, which will be made of a duct, must be chosen in the tone.

Stitches take their origin in a strong part of the fabric and are directed in the opposite direction. Here the lines are made (small stitch), and the needle returns to its original position. The work first leads in one direction, then perpendicularly. The appearance of the stitch resembles a wave. The needle move is done on top of the thread, then under it. As a result, it should be lattice.

• successfully pick up threads;
• skat in a circle;
• make small stitches;
• cleat patience.

Severe two types of ducts, even an inexperienced hostess will be able to cope with the task, how to sew a hole on the pants, if the thing is sorry for the thing and it can serve in the harmonious form for a while.

Ensure the first help should be skilled clothes. This means that a young mother not only needs to know how to shake a hole on trousers, but also master the art manually put patchwork.

When a child, returning from a walk, brings the knoches of the cloth in the palms, and the blocks are wounded on his knees, you will have to put a beautiful patch. For this, the torn edge is given in accordance with the form resembling a geometric shape. In order for the insert to be relatively inconspicuous, it is recommended to select a fabric to tone the main color of clothes.

Prepared flap predetermined. If the fabric sits down, then make the allowances more.

1. Soak the product inside out and apply the front side of the workpiece. Check that the drawing on the fabric coincides or the equity threads are located in one direction.
2. We fasten the details of the steps.
3. Conduct the edges of the patch and fix them using the secret seam.
4. We masize the edges of the hole. We fell into them inside and stitch will be the same way.
5. Remove a contrasting hint thread.
6. Put insertion fragment.

It does not always work carefully and properly sew a hole. From this situation there is also a way out. Buy in the sewing unit the thermalclock and with the help of an iron, attach it to the place where the tissue was gap. When it comes to trousers, make symmetry on them using the same or different application elements.

Today there is a fashion for ribbon jeans and other things of the wardrobe. Therefore, from suddenly appearing holes, you can not get rid of it, but, on the contrary, add them. Thus, the old product acquires the second life and becomes trendy.

Sometimes the rupture appears between the legs, and put the hand seams difficult. Then use the sewing machine, which is probably in every home. Stop the Zigzag program and apply a line from the front side. Seam should turn out dense.

So that the pulbs are not visible, and the applique, masking them, did not move away, neatly around the edge of the insertion lock it with secret stitches. Do not forget to watch the sticker.

Sewing the torn edge along the seam, make sure that there is no involuntary tissue tightening. Otherwise, the product will lose its primary look.

In the process of sewing holes, show fantasy.

• accessories;
• ribbons;
• lace;
• sequins.

It is not necessary to select a tone cloth for patch, it can be a contrasting shade.

If there are old products in the house that are suitable for invoices, use them to fix the product failed. Especially relevant to do it with jeans. You beat the hole in the prominent place with a patch from old trousers.

It turns out, it is easy to reanimate the thing with your own hands. Now you know how to sew a hole, put a patch on trousers and from the pants left from fashion to make a trendy thing. And how to do, you will tell you the luggage of knowledge accumulated over the years. Especially since we all studied at school and visited technology lessons.