Where should the arrows on trousers. How to stroke pants with arrows? - Step by step video. Secrets of easy ironing

The distinctive feature of classic trousers is the arrows, but after the first washing they can disappear. In this case, you should not worry, because it is enough to hold the right ironing, and they will return. How to do this, consider further.

3 stages ironing trousers with arrows

1 step

Having created the necessary conditions, it is necessary to thoroughly try the pants themselves:

• Check the iron so that the surface for ironing is clean, and after setting the required temperature on the basis of the testimony on the label.
• Pants turn inside out and thoroughly stroke the fabric from the inside.
• From the wrong side of the fabric, they carry out a wet soap in the places where the arrows will pass. This will allow them longer to hold.
• Again turns on the outer side, they smooth pockets, but so that they are not imprinted, it is worth putting paper in them or a small towel.
• After the pockets stroke the belt.
• They stroke the pants on the central part and the seams. Watch not any dents remain.

Sometimes on trousers during ironing can form sides. You can get rid of them if they are lubricating a 2% solution of hydrogen peroxide, wipe this place and then rinse the pants in clean cool water.

2 step

If you do not have the experience of smoothing the arrows, then it is better to moisten the gauze in ordinary water, and we recommend cooking a special solution to the liter of water to add 1 tbsp. l. Cutlery 9% vinegar and a little liquid soap, mix well. But if black pants, it is better not to add soap so that the divorces do not appear. In this solution, the gauze is soaked.

After stroking this composition, the arrows are better fixed, but also get rid of them from them only after washing.

3 Step

• The first thing you need to do is to properly fold the pants of the trousers. To do this, drive each other side seams on the product. If the pants are sewn correctly, then they just coincide with the plots.
• You can additionally fix pants, connecting one pant with another to do not move, especially if the tissue is silky and slides.
• Everything is fixed and put the pants on the ironing board.
• Cover wet gauze pants and begin to stroke the arrows - first in front, then rear. It is important to know that the arrows should not be all over the height of the trousers. They must end with indents of 7 cm from the waist area.
• Turn the pants and repeat the movements. It is advisable to stake at the same time two pants. Some hostesses are trying to iron each other, but it is much more difficult.
• When smoothing the arrows, there is no need to often move the iron, even if the pants are fixed with the pins, the cloth goes away. Therefore, it is better to hold it for some time by moving very slowly.
• They stroke until the fabric is completely dry.

The fabric itself is of great importance. For example, if it is light and thin, then the arrow get easy. When the pants are sewn from thick fabric to achieve the desired result, you will have to disappear a lot longer.

How to remove the branded arrows on the trousers?

• It is important to choose the correct heating temperature of the iron - it must be close to the highest.
• Ironingly spend after washing when the product is a bit wet.
• It is stroking with an inside, and you can apply a moistened fabric again - impose on the arrows and disappear well.
• If the pants were dried, but the arrows remained, they can walk with a sponge moistened in the water and repeatedly try through the wet marry.
• Before ironing, the tissue can be abundantly moistened with a glass of water with a sprayer, in which 1 second was previously dissolved. l. Air conditioner for linen.

Video: master class on ironing trousers with arrows

The arrows on trousers can rightly claim the status of the main trend, since already throughout the sufficient amount of time are an integral part of the classic costume. But over time, before each question arises, how to properly swallow them so that the arrows at this endowment of the wardrobe were just perfect and harmoniously complemented our image. And just in this reader will help this article.

The beginning of its existence of the arrows on trousers was received at the end of the XIX century, at the moment when in foreign countries of Europe began a stormy tailoring and mass sale of finished clothes. Pants had special popularity - this product was manufactured not only for residents of the country's country. Its part of it was sent to other cities, states using for delivery, mainly water transport.

In order for transporting shipping ships, as many products as possible, it was sent for a powerful press before loading. Just because of this process, the pants had rigid folds, to get rid of which was the difficult thing. But buyers did not confuse such a defect, and soon he converted a fashion trend that does not lose its relevance to this day.

Preparation of trousers

Women and men's pants are made from a variety of fabrics, each of which has its own specific features. But the most important is that for each type of fabric, you need your defined temperature regime. To facilitate the task to the buyer, the manufacturer indicates all these information on the clothing label.

How to make arrows right times and eight?

Unfortunately, once and for all make the perfect lines will not work, but so that the pants are pleased with the eye, during ironing it is necessary to comply with some simple rules:

• Before you begin ironing, clothing needs to be inspected for the presence of spots. Since, at high temperatures, even a small one, barely noticeable stain turns into a further problem.
• First it is necessary to prepare trousers. From their surface, with a brush, a variety of pollution is removed in the form of a fur or pile.
• Pockets are cleaned of all unnecessary items.
• Iron should be carried out only on a solid surface.
• The base of the iron should not have any contamination on its surface.
• During irrigation of trousers and strokes, the lines should be used. This is a small fabric flap of gauze or sitz. Its use allows you to prevent the appearance of glossy traces on the surface of the fabric.
• It is necessary to prepare a capacity for simple water, because during irrigation, the flap of the fabric is wetted at mandatory.
• The process of irrigation of the trousers must begin with a back side, from its upper part.
• In order for the front of the fabric, the fabrics appear, under pockets there is a small terry towel.
• At the time of ironing should not be very pressing on the iron.
• After the pants stroke on the reverse side, they are turned on the front side.

Methods for creating arrows

To get the perfect lines on both halves of trousers, it is necessary to combine their internal and external seams.In the event that the wardrobe object is listed correctly, the arrow coincides with the lamination, which comes from the belt of the trousers.

You can stroke the arrows in various ways. Someone prefers to stroke both part of the pants, and someone does it in stages.

To achieve a good result, you must perform the following actions:

• A trouser is prepared, as described above, and is superimposed on it the fabric moistened in simple water.
• Based on the requirements of the temperature mode, which can be found on the label, the corresponding mode is set.
• As the launcher drying, it must be watched in water. If, of course, the ironing is not made with an iron, equipped with a steamer.
• To be much easier to try the arrows on the fabric, you can put the iron to a certain place and wait some time after moving its base. This method will be especially convenient if the trousers are made of slippery tissues.
• Inspagging one side of the trousers, make sure that the result is mandatory. The lines on the trousers must be perfectly even on all their length, ranging from the belt.
• Follow the second side by completing it thus ironing.

Look more in the video below.

The ability to receive after stroking the ideal result comes gradually. At first, many spend a fairly large amount of time for this process, but after each time it is reduced, and all of the above steps are performed with greater speed and efficiency.

How to remove glitter?

Often we are faced with the situation when the lighter traces remain during irony of the trousers on the fabric. And to prevent their appearance, you must comply with the following simple rules:

• It is advisable to stroke the trousers on the back of the road to avoid lightening traces.
• During the stroke of the arrows, use the Peremnuty. It is a small flap of fabric, which during irrigation is regularly wetted either in conventional water, or in a weak solution of the essence, which is compiled in such a relation: to a liter of water, use a teaspoon of acetic acid.

What if the arrows turned out uneven?

In the absence of great experience, it's not immediately it turns out to try on trousers perfectly smooth arrows, but do not be upset. If something does not work, and the arrows are irregular, you only need to repeat all the above steps again, smoothing from the reverse side formed folds.

To make up the creation of the arrows too much time every time, it is necessary to take care of maintaining the purity of the trousers after each socks. It is necessary to clean the pants from dust and fur with a special brush, and necessarily put them on the hanger.

Arrows on pants - an integral element of a business male costume and a female classic style in the trouser performance. They give stylish and elegance to their owner, emphasizing his attitude to appearance. And the process of ironing trousers with arrows has its own nuances requiring patience and skills.

Necessary accessories

Starting ironing trousers, especially when it is a classic version with arrows, prepare a pre-working tool:

• ironing board, be sure to ensure;
• iron;
• pC (preferably of cotton fabric);
• pulverizer with water.

Preparatory process

Ideal arrows - the result of the painstaking work of any woman. Experienced hostesses have already developed their strategy, and beginners will have to comprehend the basics and get acquainted with some tricks of difficult lessons.

When sewing trousers, various types of fabrics are used, and to facilitate the consumer care for this item of the wardrobe, manufacturers usually place all the necessary information on special labels seized from the inside of the product. Adhering to the indicated recommendations and several rules, you can achieve smooth, not increasing the long arrows.

1. Stick the temperature mode indicated on the label.
2. Pockets are free from all objects there, even small.
3. Inspect the pants for the presence of spots. It should be ironed with clean clothes, since even the inconspicuous spot will appear under the influence of high temperature. All Vile, Dust, Wool Clean the Clothes Brushed.
4. Prepare for ironing smooth surface. If there is no ironing board, adjust the table by covering it with a dense cloth.
5. Clean the sole of the iron thoroughly.
6. On the front side, the product is ironed through the retool, which use white tissue, for example, gauze or cooling. Compliance with this paragraph will create smooth arrows, and avoid the appearance of the glosk tissue.
7. The retool during ironing is recommended to moisturize using a special mode on the iron, or prepare water container.

By training, you can proceed to the process itself.

Observing a certain sequence developed by not one generation of the hostesses, it is possible to facilitate and speed up the trousers of trousers with arrows.

Ironing starts from the wrong side, from the belt. Processing pockets, show the accuracy so that the struggled tracks are not formed on the fabric. To do this, pockets are placed or a small towel. Announced thus trousers pull out.

Jeming the seams on the brothers, internal and external, get smooth, symmetrical arrows. This is provided that the sewing of the product is performed qualitatively.

Women with experience in this direction prefer to iron two pants at the same time. For those who are only mastering the equipment, it is better to iron every trouser individually.

A wet retool is superimposed on the pants, the temperature is set to the tissue type and the treatment begins. Watch that the fabric does not dry, periodically splash with water. And the iron itself is not moving along the arrow, so you can bring it down. It is safer to lower the iron on the thing, to hold a little and move to the next point. Having finished one side, proceed to the second.

After stroking, inspect the result, the arrows must be even over the entire length.

Useful secrets

1. Even if you have the newest iron model with modern equipment, the pants should be ironed only through the fabric.
2. Getting Started with the process of ironing trousers, start with your knees, which will allow you to save the arrows even along the entire length.
3. The arrows can be fixed with pins in order not to disturb the laid trousers. The only drawback when using this reception is traces from punctures on some tissues. Pre-test a test test on the place imperceptible to the eye, stuck needle.
4. Wetting the retreat of water with the addition of table vinegar, you can make the arrows with sharp and hard. In addition, this solution perfectly removes the plot stains.
5. If there is an economic soap from the wrong side along the fabric at the location of the arrows and only after that stroking, they do not lose their appearance for a long time.
6. After processing iron, the pants are not recommended immediately to wear. It is advisable to leave them until a complete burner on the smooth or on a special trouser hanger. Otherwise, they will instantly remember.

Do not despair if you spend much time from the first time, and the arrows will seem not perfect enough for you. The errors are easy to eliminate, smoothing from the inside a failed result and repeating each stage from the beginning. Digit a few pairs of trousers, you will gain experience, and in the future, it would seem that the complex process will be performed automatically in a few minutes.

Video: How to make arrows on pants

For business person, pants are almost the most important element of the wardrobe. The tidy look and flawlessly the smooth arrows will tell about their owner even more than he can tell about himself. For this reason, it is so important to learn how to correctly stroke pants to feel confident, and the colleagues had only a pleasant impression of you.

How to iron pants: necessary equipment and work algorithm

In order to hardly stroke trousers, it will take a good iron and properly organized place for ironing. Without all this, it will not be possible to get rid of folds and crumbos, as well as make beautiful, smooth arrows. Ideally, if the iron is equipped with a temperature switch and steam feed system. If you have an old Soviet iron - also not trouble. In this case, always use wet gauze, folded several times. If you are a happy owner of the vertical swap, then with it, you will be able to smooth out even the most difficult reference directly on weight.
With the help of a special nozzle, you can make smooth arrows without distortion

Pants are better stroking on an ironing board, but it is quite successful can be replaced with a kitchen table, covered with a dense bedspread. Subscribe and auxiliary items:

• peremnuty;
• portnovo pins or stationery clamps (binders);
• water pulverizer;
• terry towel;
• cardboard or tight sheets.

Pants, like other types of clothing, is recommended to iron from an inside or through a path. It will keep the fabric from the formation of Las, shine and subpalin. Pins and clamps will be suitable when the arrows are glad, because with their help the stepper and side seams are fastened. The pulverizer is used for additional wetting of the fabric so that the folds are better to run away, and the terry towel facilitates the process of ironing some hard-to-reach places. The cardboard sheet is put under the burlap pockets or seams so that they do not imprinted on the outside of the trousers after ironing.
For ironing trousers you will need an iron, ironing board, a switchboard and clips

Temperature modes for ironing trousers from different fabrics

Before you begin ironing, you need to get acquainted with the information on the label. There should be a composition of fabric and care recommendations. Depending on the material, you need to choose the optimal temperature mode.
The label shows the pictograms indicating the parameters of ironing and the care of the product

Knowing the composition of the fabric, it will be easier to choose the right temperature mode on the thermostat:

• wool, blended fabric - Wool mode, number 2 or two points;
• polyester - Silk, Nylon mode, number 1 or one point;
• cotton, flax - Cotton, Linen mode, digit 3 or three points;
• cotton + synthetics - stroke like wool, but with pressure.

Wool do not stroke with pressure, and steamed, barely touching the fabric of the okoga sole. Cotton and flax iron with pressure using a wet path. Synthetic fabrics are smitted with minimal temperature only through gauze. If it was not possible to determine the composition of the fabric, then ironing starts from the inside in the place of the poda trouser.

Also take into account the type of fabric. If there is a pile, then the product is stroking only with a pendant side. If this is not enough, the iron lead in the direction of the pile, that is, from top to bottom, slightly touching the surface of the fabric.

Algorithm of ironing classic trousers with arrows

Pants are stroke in the following sequence:

1. Soaked inside out.
2. First stroke the upper part: burlap pockets, under them.
   Burlap trousers stroke with inside
3. So that the pants were well sitting on the figure and do not frown on the seams, wean the side and stepper seams. The side seam is ironing from the belt of the book, stepper - from the bottom of the trouser up.
4. Pants turn on face.
5. Disseminate zipper, reveal its different sides and ironing the middle seam. Stroke in the field of buttocks.
   To renew the middle seam of the trousers, you need to open zipper
6. They smooth the belt first on the front half, and then on the back.
   Belt trousers ironing from outside
7. If there are folds that go into arrows, you also pay attention to them.
8. Stroke the side and rear pockets.
   Side pockets stroke with face, pulling the pants on the ironing board
9. Inside the trousers folded towel or put on the edge of the board.
10. They smooth the gulfik and the front of the trousers.
    Gulfik stroke the nose of the iron
11. Collect pants in half and proceed to the formation of the arrows.
12. after the end of the work, the pants are allowed to cool for 15 minutes, and better than a few hours.

How to make arrows on pants

For an inexperienced hostess or idling, male, ideally smooth arrows are quite difficult. If you do not want to spend money on dry cleaning every time, you should learn all the wisdom of impeccable ironing. There are two important points here: how to fold the trousers and where, in fact, these arrows should be.

How to fold the pants and where there should be arrows

For the formation of impeccable arrows without distortion, it is important to fold the trousers correctly. The product is twice as high in the middle seam. The trousers are aligned so that stepper seams completely coincide with the side. It is monitored that the side of the side seams coincide in the top of the trousers (they look at the edges of the belt). If the pants are removed correctly, then when combining the seams, the front arrow will begin with exactly the end of the front folding or fold.
To correctly form the arrows, you need to fold properly

The arrows as if "dissect" the front and rear halves of the trousers into two equal parts. Depending on the model of the trouser on the front, they can begin with an extract or fold. If pants with two folds, then the fold, which is located closer to the gulfik, goes into the arrow. As for the rear halves, there the arrow ends somewhere at the end of the back of the reverse or inner edge of the pocket, but does not reach the belt. Rear halves of trousers always iron after the first. On it, the arrow is formed quite easily, but only after you have fed the front.

Photo Gallery: where arrows are located on different models of male and female trousers

In such trousers, the front folds pass in the arrows arrows begin by the ends of the front twist

Is there a difference between ironing female and men's trousers with arrows

There is no significant difference in the iron and male models. The ironing occurs on the same algorithm: first ironing from the inside, then the upper part from the "face" and finally begged the formation of the arrows. The difference may be unless in the ironing technique. Women's pants can be tinned down the book or almost adjacent. In this case, when the inner seams are ironing, a fresh terry towel is invested, or stretch the same stem on the sleeveless chalkboard. Do it in order not to disturb the arrow fold line and do not make a fold from the inside.

It is also necessary to take into account the fact that not all models of women's trousers arrows reach the belt.
Arrows on female trousers visually elongate legs

How to try the arrows

So, you have traveled half the work and remained only for the arrows. Do the following:

1. Fold twice the pants, align the steps and side seams.
2. Create pants in the belt using clamping or pin (if the fabric is not too thin and punctures will not be visible on it).
   Belt Trousers Better Break through the Stationery Clamps
3. Unscrew the top of the trousers to the side.
   Arrows ironing on each trousers separately
4. Create at the bottom, after checking the matching of the seams line.
   With the help of stationery clamps, you can fix the bottom of the trousers and then the seams will not be erupted during ironing
5. If trousers on the lining, do not forget to push it as much as possible.
6. Cover the bottom of the trousers by the path and moisten with the water from the spray.
   Grid grid greatly facilitates the process of forming arrows on trousers
7. "Note" the front arrow line: Apply the iron in turn first in the knee area, then at the top and finally, in the bottom.
8. After that, boldly irrigate the arrows in the direction from top to bottom, slightly pulling the trousers with a free hand.
   First weeping the arrow on the front of the trouser
9. Find a stepper seam.
10. Start the formation of the rear arrow in the same way, only ironing should be in the opposite direction - bottom to up.
    The arrow on the back of the trousers is ironing only after they made an arrow on the front
11. Turn the trousers to the other side and join it again.
12. Give the trousers a little cool (15 minutes).
13. Turn the pants to the other side in such a way that the edge part turns out to be on the surface, and the stroke was aside.
14. Form the arrows in the same way.
15. Fold twice the trousers so that both pants lay on each other, and once again join both sides.
    To secure the result, both halves of trousers stroke together
16. Give the product to cool for an hour.
17. Hang the trousers on the hanger or wear.

The path can not be used if you have a high-quality steam iron with a ceramic sole, and the fabric from which the pants are sewn, it is good to be wet-thermal processing and resistant to the appearance of shine.

How to save arrows on pants to washing

Formation of smooth, beautiful shooters without a "doubling" and distortion is a painstaking business and requiring skills. Therefore, it is quite natural to want to keep this effect at least until the next washing. There are several tricks that will help fasten the arrows for a long time:

1. A piece of soap. Soap draw the line of arrows from the inside. Then the product is turned and ironed with steam.
2. Acetate solution. A tablespoon of vinegar will be needed on the liter of water. The solution can be sprayed or poured into the tank with water and stroke a "acetic" ferry. The bending of the arrows is obtained clear, even and resistant to deformities.
3. Starch solution. On the liter of cold water take a teaspoon of potato or corn starch. Boiled on fire for 2 minutes, and then allow to cool to room temperature. In the resulting solution wet the path. Use only for linen and cotton fabrics of light shades.

By the way, the vinegar solution prevents the appearance of shine and Las on the fabric. Thus, using vinegar when forming the arrows, you also protect the pants from the formation of ugly shiny spots.

Video: How to iron arrows on trousers and how to make them durable

Correct the errors of ironing: Las, Podpaled, Double arrows

Unfortunately, we often forget to use the path and the fabric remain ugly shiny stains. Fortunately, in most cases, such problems can be eliminated.

How to remove las and shine

Las are brilliant traces from the sole of the iron. Most of all, they are noticeable on dark tissues from natural, mixed and synthetic fibers. The problem is eliminated in the following ways:

1. If the cloth is made of cotton or flax, then almost always las are eliminated by steaming through a wet path.
2. If the tissue is blended, you will need to prepare a solution of water, vinegar and several drops of liquid soap. In the solution, wet the gauze and move through it a problematic place until the stain disappears.
3. From woolen fabrics to eliminate the gloss will help the ammonia alcohol. A few drops of the ammonia are bred in a liter of water. Then come in the same way as in the first way.
4. Las on synthetic tissues remove gasoline. The cotton disk is wetted in the medium, and then they are processed by a stain. After such treatment, the product is covered and dried natural through.
5. The shine from dark costumes also remove unsweetened black tea: watched the swab and process the stain.
6. You can also wash the pants again, and when ringed, add air conditioning for linen.

If it did not manage to eliminate Las alone, then the trousers in dry cleaning should be attributed. In the case of synthetic tissues, it happens that the shine from the iron remains. In this case, pants are spoiled forever.

Video: how to remove the brilliance with the pants from the iron

How to remove the fed from the iron

Podpaled are yellow spots that are noticeable most on white, light and colored fabrics. Eliminate them more difficult than las. To this end, the following ways are used:

1. Lemon and sugar powder. The stain is rubbed with a slice of lemon and sprinkled with powdered sugar. Give it to dry, and then partially caress the processed area or erased the product completely.
2. Lukovy Kashitsa. On the place of the scene is applied to onion casicia and leave until complete drying. Then erased and dried as usual. You can also use midwalks that thoroughly rub the spots.
3. Vinegar and salt. Make a solution of 9% vinegar and water in equal proportions. The place with the spade is wetted in the solution, and then sprinkle with salt. After the fabric dried, the product is erased.
4. 3% hydrogen peroxide. Use only on white tissues. The peroxide is applied to your cotton swab and handle the place with the fed. After the processed area gets free, it is rinsed in cold water.

If they are inseparal in their forces and are afraid to spoil the pants finally, then immediately contact dry cleaning.

The first time it does not always work out the right single arrows. If the pants slid along the ironing surface during the smoothness, then the formation of double arrows, which will clearly do not please the one who these pants are going to wear. Fortunately, remove the "homemade" arrows is much easier than sustainable industrial, formed under a special press. Do the following:

1. Remove pants inside out.
2. Expand so that the arrows are in the middle of the trousers.
3. Pretty moisture gauze and put it on a problem.
4. Ironing until the arrows disappear.

The disadvantage of the method is that, most likely, you get rid of the "factory" arrow and it will have to form anew. We advise first to try to fold the trousers correctly so that the seams coincide, and then go well with the ferry. Perhaps the excess arrow will disappear. You can also wash trousers, and then try to rejuvenate them better.
Excessive arrow can be tried to eliminate stroke through the wet cloth