What you need to buy for hardware manicure. Hardware manicure: step-by-step guide for beginners. What additional tools and materials are needed

The task of each girl is to maintain nails and hands in perfect condition, because our brushes are always in sight. Someone prefers to visit the masters, and someone likes to independently spend home treatments for their fingers. So that the hands always looked immaculately, it is important to take care of them regularly. How to use a manicure set? In this article you will familiarize yourself with the main types of instruments and their use. Useful video will help you choose the highest quality manicure sets.

Types of manicure sets

To choose a type of manicure set, you need to decide what manicure you prefer: a classic, hardware, unedged European. There is a general rule, regardless of the type of accessories - good quality, in connection with which the cost increases. If you are not a professional, it is better to give preference to a home use set, which will be convenient to help avoid damage and skin injuries, nail plate.

It should be paid to the material from which the working parts of manicure tools are consisting. They should easily succumb to boiling, sterilization. It is important if you use a manicure set alone. After, before applying, it is necessary to carry out disinfection of the tools, which prevents infection with infecting through blood diseases, reduces the risk of infection when the microtrauma is applied during the manicure.

Classic kits allow you to manually handle the skin of the hands, nails. In most cases, they are closed in a case or case. The classic manicure set includes: nippers or tweeters, scissors with straight ends, with thin and rounded, booksman, a sawmother, seabers, tweezers, trimmer.

In addition, they can be roads (includes the minimum number of tools that provide emergency Nails and hands), professional (for use by masters in salons), homemade (contain many devices for a full manicure).

Professional - consist of tools that are characterized for a long time Services, increased strength, expensive materials. In addition to the device, with the help of the care of hands and nails, pedicure accessories can be included. Designed for long-term operation.

Men's sets - include the same number of items that are included in the classic. The tools are larger, massive so that men are more convenient to use these accessories. Closed in a case or laconic design case, given the tastes of a strong floor.

Electric - the composition includes a portable device with different nozzles that lead nails, the skin into the proper look. With it, you can remove the cuticle, give the shape of the nails, polish them, perform other procedures for high-quality manicure. Adjustable speed, replaceable nozzles, special features make it possible to achieve high efficiency of the portable instrument. Electric manicure kits can be domestic and professional, which are different with each other.

What enters the mechanical set for manicure

The largest manicure set can include from ten or more tools, about some of which women can even know. The following list will allow you to familiarize yourself with each device:

Paths or nippers. For neatness, the manicure must necessarily process the cuticle. In most cases, it is postponed by an orange stick or clipped with scissors. Sometimes used tweezers that should be comfortably lying in the hand. When choosing, you need to try to open and close them so that there are no interference and sounds with these actions. Tweeders do not have to do, be too tight. The width of the sponges of this tool should be up to 0.5 mm, the joint without breaks, the stroke smooth, soft, and the cutting edges are sharp, smooth, without scratches, jar.
Scissors. May be different to perform certain functions: to give shape, cutting the cuticle. This tool is made of stainless high-grade steel hand sharpening. The main requirement is sharpness, since the blisted cutting edges can lead to injuries, burstles. If the cuticle is thin, choose scissors with narrow blades, for thick - with wide.
Knipser - designed to give solid nails of the desired shape, cutting them. It has a comfortable handle, innovative design.

Shaber - a blade, designed to pushing the cuticle. It is made of stainless steel, other durable alloy. Shabers can be bilateral when one end is used to move the cuticle, and the second is to clean the protruding tip of the nail. The handle of the tool should not slide in the hands.
Pilochka. IN big sets There are some different optionswhich differ in material, graininess. A tool with a diamond single-sided coating perfectly squeezes the nails, removes the dry old skin of the cuticle. The next appropriate material is a crystal or glass that is given to produce fracture in any direction, not harming the nail. Crystal or glass file durable, aesthetic looks. Metal is better not to use. Any tool for this kind should be durable, abrasive coating - to have increased resistance to abrasion, not to crumble at each application. To feed the nail from different angles, under all sorts of degrees, the sawo must have flexibility, so a paper-based tool is perfect. There are universal polishing saws with four working surfaces with different graininess.
The trimmer is an object with a split tip, designed to process burrs. It is not recommended to work with a duplicated tool. The second end of the trimmer can be made as a blade to move the cuticle.
The orange tree wand for the cuticle, which has a high softness, carefully moving the skin.

How to use a mechanical set

Before starting the nail care, you need to disinfect all tools or disappear boiling water. After you can proceed directly to the procedure. How to use a mechanical manicure set? The sequence of manicure is as follows:

First, the hands are sprinkled.
The nails are given the desired length, the basis under the future shape of the tweezers.
The pailer of the nail plate is fed throughout the edge, while removing irregularities after shorting.
Cosmetic scissors remove burstles.
The edge of the nail plate is polished.
A remedy for the cuticle is applied, chopstick sprays from the nail. Removes if necessary by the trimmer.
The entire nail surface is polished with a side of a sawmill with a soft coating.

What is included in the electric set for manicure

The electrical manicure kit includes a rechargeable machine and special nozzles:

The blade for raising the cuticle - it should not penetrate too deep under the skin. The processing is made from one edge to another and back.
Large cone-shaped nozzle - for grinding corns, rough skin. The nozzle gently moves along the required area.
Cylindrical nozzle - designed to care for the nails on the legs.
Small discs are designed to feed, give the desired form. For thin nails A disc with a shallow notch is used for thick - with a large one.
The cone-shaped nozzle is designed to remove the fracturing areas of the skin, working with the ingrown nails. Used in direction outside inside to base.
Disk for polishing and grinding - gives beautiful shine.
Discs to remove flap skin from feet feet with a scratched surface and palms with less rough.

How to use an electric manicure set? The sequence of application of this tool is as follows:

Nails before processing do not need to be swollen in the bath. When first procedure, choose nozzles with a small abrasive and low speeds.
Treat the skin located near the nail, polish, pick up the nail. Correct treatment, cuticle.
In damaged areas, hardware manicure cannot be done.
Operations need to be done carefully, without much effort, so as not to spoil the manicure, do not injure the skin.
During the use of the blade to raise the cuticle, watch it does not penetrate very deeply under the skin.
A cone-shaped nozzle for processing an ingrown nail, removal of flabber skin needs to be used in the direction from the external to the inner base of the nail plate.
Small disks for feeding give the right form.
Polish disk to give shine.

How to use a manicure set of home

Beautiful manicure is the last touch that completes the image. well-groomed woman. To make it, you can use a mechanical or electrical set. Cosmetic scissors need to remove burstles. Peddly cut the nails, and with the help of the saws, give a certain form. The blade is used together with the means that you need to apply on the cuticle, wait a bit, remove the softening skin. If you make an unedged manicure, then the skin must be moved away. The last stage is grinding the surface of the nail to the pilocker.

When working with electric manicure sets, pre-sparking hands is not required. Replaceable rotating nozzles are handling overlooking dry skin, shape adjustment, nail length, removal of a dead surface. First the device must be charged. Also, the tool needs to rest so that the motor does not overheat. To change the nozzle, you must insert a new one, turn, press in order to secure in the required position.

When adjusting the length, the nail should move along the disk in one direction, and the device itself must be kept directly. To move the cuticle, a special nozzle is used, as a result of which the nails become longer, well-groomed. To polish the nail plate, use a cone with a felt coating. After completion of the manicure, do not forget to use the cream for hands and oil.

Video on the use of the electric set for manicure

Electric manicure-pedicure set makes a wide variety of manipulations due to a large number of nozzles. With this tool you can handle both natural and artificial nails. The kit has a mass gain: painless elimination of the cuticle, the possibility of processing the inner surface of the abnormal part of the nail, careful removal of corns, a holopal. To know how to properly use such an appliance, see the video below.

Neat I. beautiful manicure gives a girlfriend confidence in his flawless appearance. For the right, high-quality nail care requires a manicure set, which includes a variety of tools: manicure scissors, tweezers for removing and processing cuticles, trimmers, curetles, nippers, saws, shabras. Beautiful view Our fingers depends not only on the skills, but also from the quality of accessories, the material from which they are made. The video presented will help you choose a good manicure set, which will serve for a long time.

Advantages of hardware manicure: Removal of the cuticle occurs without the risk of skin damage, vessels around the nail plate; Regular procedure slows down the growth of the cuticle; The result persists 2-3 weeks; There is an ability to correct the nail plate; Impossible infection and distribution of fungus; Processing and problem nails.

disadvantages: Cheap equipment; It is necessary to undergo special training; During the procedure there are painful sensations if it performs its newcomer; There are some contraindications (too thin nail plates with increased fragility and other).

Rules for hardware manicure: The nozzle should not be pressed too tightly to the nail plate; The surface of the nail must be dry; In hand, the device is kept exactly as the handle for the letter; All movements are performed from the center to the edge, without lingering in one place. Every 5-7 minutes, the device is turned off and give it "rest" literally for 2-3 minutes.

Step-by-step technique for beginners:wooden stick move the cuticle; A milling mill "Drum" is inserted into the apparatus, it is processed by cuticle and leather rollers around the nail plate; The milling cutter is changed on a soft spherical, cleaned from dead cells surface around the nail, along its well; Change the cutter on the trapezivid or cylindrical for the correction of the shape of the nail and its length; Polishing of the nail (remember 2 rules: the edge of the polishing milling cutter can not be inserted to the nail plate; to monitor so that the roller does not delay in one place of the nail longer than 1 second). Remove dust, cover the plate with decorative varnish (if required), lubricate the cuticle and lateral rollers with nutrient oil.

It is possible to carry out a procedure no more than 1 time in 2 weeks..

Choosing a device for hardware manicure, you should evaluate: speed speed per minute (recommended range 20000-30000 rpm. It is used to process the surface of the nail plate, nozzles (general rule for them - the diameter of the shank, which is inserted into the apparatus itself, should be 2.35 mm, can be diamond, ceramic, polishing, of more solid and rigid materials).

Popular models: Aurora, Strong, marason and escort, cost ranges within 6000 - 17,000 rubles; Subsaster and xenox, the price is from 6,000 to 51,000 rubles; Charisma, the cost of 7,000 rubles; Horsa, the price is within 10,000 rubles and above. You can purchase and cheaper for study.

If the wizard works according to the scheme of classical cutting manicure, then it uses sharp tools and pre-sparking hands. This is at times raising the risk of skin injury, the client is forced to closely monitor the work of a specialist and be all the time in tension. The hardware manicure allows you to fully relax and receive only pleasure - neither fear or pain.

Naturally, some disadvantages are considered to be the type of nail care.

the procedure needs to be performed by special equipment and this is not a classic manicure set for 300 rubles;
to perform a hardware manicure, you need to undergo special training and know which nozzles are applied and at what speed it should rotate for safe nail processing;
if the master is inexperienced, then during the procedure there may be painful sensations;
there are some contraindications - for example, it is impossible to make a hardware manicure on too thin nail plates with increased fragility.

Ceramic - They differ in the presence of small "pits" and bulges on the surface, which provides an excellent result after nail processing. Such nozzles can be used to carry out all manipulations within the framework of the hardware manicure, they only can not clean the space under the nail.

Polishers. - Can be silicone and natural. In the first case, they are used to work with extensive nails, but natural polishers are perfectly coping with a "clean" nail plate. They can work "dry", and you can use special cosmetic oils that will feed the nail and make it brilliant, as after applying the protective coating.

Polishing nails (polishers)

Separately, the sale shows cutters that are made of sufficiently coarse metal and are used for primary, aggressive treatment of nail and leather around it.

Aurora, Strong, Maurason and Escort - Production of Korea, the cost ranges within 6000 - 17,000 rubles;
Subsaster and xenox - are made in Germany, the price is from 6,000 to 51,000 rubles;
Charisma - China, cost 7000 rubles;
Horsa - production Russia, the price is within 10,000 rubles and above, depending on the category and functionality of the equipment.

Watch on the video review of the Manicure apparatus Harizma H10402:

There are models and with more low pricesBut to check their quality and even more so get the warranty on the goods is unlikely to be possible. In principle, even the devices worth 2000 - 3000 rubles can delight their work throughout the year.

CARE FOR EQUIPMENT

To avoid the need to buy new equipment, you should work with it strict according to the instructions. For example, it will not be very possible to give a nozzle or cutter on the nails - this can even lead to the destruction of the instrument handle, which makes it impossible to further use it.

Some models are equipped with a special key, with which you can change the nozzles and cutters - you need to work only by it, the use of other "primary" means causes damage to the fixation mechanism.

Be sure after each manicure procedure, the equipment is cleared:

each nozzle and cutter is rubbed with cotton wand or disk - the surface is exempt from dry particles of the epidermis;
all elements are washed under running warm water;
be sure to place nozzles / cutters into a disinfecting solution or special sterilizer (second option is preferable);
all these components are stored in a separate closed case.

The hardware manicure has a lot of advantages and quite a bit of flaws. The possibility of fast learning to all manipulations, the availability of equipment made this procedure popular among lovers of independent nail care. In compliance with all the recommendations and instructions for the equipment, no complications may not be - nail care will be not only high-quality, but also absolutely safe.

Modern women are increasingly turning to professional manicure crafts for creating perfect nails! Methods for which specialists work quite a lot and one of the most popular is a hardware manicure that has come down from Europe.

What is a hardware manicure

Working "in the old manner", preparing the nail plates for manicure, the master cuts off with special cutting tools to the cuticle, after grinding his nail making it perfect. The hardware method allows you to exclude rough cropping skin with tools. The preparatory stage is performed due to the treatment of skin growth, the nail plate with the help of a special apparatus, which is equipped with different nozzles, depending on the type of activity.

This technique is recognized as as gentle as possible, compared with the edged technology. Thanks to her, it is possible to preserve the former structure of the nail, they remain strong, healthy. Carrying over the nails in this way is allowed no more than two times a month.

What manicure is better hardware, edged or combined

Hardware treatment of the nail, the cuticles are considered to be the best compared to the edged - primitive, gradually an obsolete technique, especially when it comes to problematic, deformed nails.

The procedure is performed much faster, the risk of enhancing the minimum injury. After all, working as a nozzle, the master does not cut off, but considers the desired zone of the burned skin. Grinding, the shocking of the nail plate is performed under a certain pressure, evenly.

Many experts consider the combined method much better hardware and edged, as this technique includes both technologies at the same time. Specialist Studying the features of the structure of nails, alternate instrumental and hardware methods for correction, giving even the most problematic nails unimaginable beauty.

Pros and cons

Technology has a lot of advantages:

removing the damaged skin, the healthy zone is not affected;
cuts, other injuries are excluded;
eliminates infection;
the cuticle after such treatment will grow slower than, for example, when cut by scissors;
processing technology eliminates pre-sparking fingertips, everything is performed in a natural state. Careful, gentle ratio preserves a healthy structure of nail plates, they do not burst after treatment, do not walk;
ideal for problem nails, dry skin around them;
ideal for a pedicure, a variety of nozzles allows you to remove damaged skin with heels, to count corn;
due to different speed of the calculation, perfectly achieved beautiful forms Even zoomed nails.
In addition, this technology takes little time, and the result is delicious. Beautiful manicure is preserved for a long time, the nails remain elastic, healthy, the plate is not depleted. However, despite a large number of Pluses, disadvantages, like any technology, have:
the technique requires a certain skill, novice professionals are often injured, leaving after the work of the furrow;
the inexperience of a specialist leads to unpleasant feelingClients feel the vibration of the device, some complain about light burning;
it is difficult to get an absolutely pure manicure, such as in the instrumental processing;
performing work on the plancoced finger, the skin will rush;
the technique is not suitable for brittle, thin nails.

The minuses are not so much, the main thing to learn to own the device, feel it. Therefore, going to the salon should learn about the professionalism of a specialist, and then trust him with his fingers!

What is included in the professional set for hardware manicure

Many manufacturers specialize in the release of electrical appliances with which this procedure is performed. Professional sets can be somewhat different components, but in general they have almost the same thing:

main Device (handle) with cord (battery);
nozzles.

The main packaging is plastic, wooden oval (rectangular) container or leather case, equipped with cutters for cutters (nozzles). Additionally there are sticks with the help of which the cuticles, baths, UV lamps, fans for drying are removed.

Set of nozzles for hardware manicure

Depending on the cost of the device, the manufacturer's ideas, the electric "machine" can have several nozzles, usually about nine:

sapphire discs, different diameters, different abrasiveness;
diamond, ceramic cutters polishers, grinders;
cones, boron - round, cylindrical, sapphire, needle;
nozzles (curved, cone-shaped, spherical) to remove the cuticle.

For cleaning nozzles in the set attached a special brush.

Tool processing for hardware manicure

Each use of the set is completed with its cleaning. The nozzles are washed with water, remove the adhesive particles of the skin with brass brushes. Good option Cleaning is the ultrasonic sink. After necessary disinfection and sterilization of the parts used. Disinfection is performed by rubbing items with antiseptic solutions, sterilize in special cabinets (used sterilizers, dry car facilities).

Phased fulfillment of hardware manicure

Before starting the procedure, the first thing makes the master, it cleans the nail plates from varnish. No sparking, water treatments cannot be performed. Hands should be absolutely dry. Next, the master performs several main manipulations:

it processes the cuticle with a softening agent, the wooden wand liftingly moves it to the base;
after skin grazing, the main processing is beginning;
give the right nails;
side surfaces of the skin are put in order (they believed the burned layer, grind), using medium abrasive discs and a cylindrical nozzle;
at an angle of 45 ° with a spherical nozzle remove the desired part of the cuticle;
thin exhausted cuticle before processing first lifted using a cone-shaped nozzle;
with palms, fingers are removed from corn, believed abrasive discs;
polish nails using a silicone trapezoid cutter, a pile nozzle.

Additionally, if necessary, with the help of tools clean nails.

Is it possible to become infected with hepatitis at hardware manicure

Performing hardware manicure significantly reduces the risk of infection with infectious pathologies, including hepatitis. However, if a non-professional works, which negates the processing of tools, the device itself, then yes - it is possible to infect not only hepatitis (B, C), but also by AIDS, HIV, Papillomavirus, fungal diseases.

Popular home apparatus

Increasingly, women prefer home manicure, buying inexpensive devices. Devices of famous manufacturers are considered the best in this regard:

Gezatone 130d;
Rowenta MP7018;
POLARIS PSR 0902;
Scholl Velvet Smooth;
Scarlett SC-MS95005.

Each of them is a professional kit, to work with which, if desired, learns even inexperienced beginner. The machines are distinguished by power, speed of work, quantity, view of nozzles, cutters. Cutters of various diameters, abrasives will become an ideal tool for creating different shapes.

Some cutters allow you to quickly and safely remove the old varnish. The main part of the machine is suitable for performing a pedicure at home. With their help, sprinkles, corn.

The cost of sets begins to vary from 1,500 rubles.

Contraindications

stewed, swollen, inflamed cuticle;
on the skin there are scratches, wounds;
the nail plate is amazed by fungal infection;
thin cuticle;
microsusuds pass almost on the surface of the cuticle.

The emergence of various types of neoplasms in the field of nail plates, their strong deformation as a result of early injuries.

Review

Tatyana, 37 years
"Professional set to fulfill the home manicure Scarlett SC-MS95005, ordered over the Internet for 1700 rubles. Immediately pleased the ease of operation, no strong noise when working. Beautiful design, small size, plastic case.
The kit is suitable for manicure, pedicure. It has a bath for gyrometry, drying (mini-fan) and 11 nozzles. Works autonomously and from the network. Two high-speed modes, the maximum number of revolutions - 9000.

Tourmaline nozzles, convenient to use. The quality of the work of some nozzles does not suit me, some at all consider unnecessary. Minus I also consider the fact that the drying is not suitable for drying gel varnishes. In general, the machine works superbly, with its help quickly and safely make a manicure independently and without leaving home "

Hardware manicure at home is the usual procedure for modern girlswho love to follow their appearance. After all, as you know, beautiful manicure and well-groomed handles are one of the components of an attractive image. Of course, all girls want their handles to always look beautiful and well-kept. For this there are many types of manicure. But how to be if there is not always enough time to visit the cabin? That is why the hardware option becomes the most popular and in demand.

Advantages of this procedure

The hardware method has several significant advantages over other types:

The risk of infection with such a manicure is reduced to zero.
The cuticle during hardware processing is not cut, only dead skin cells are removed.
This type of manicure is painless compared to the edged manicure.
The essence is fast and easy grinding of burned skin areas, which significantly reduces time.
Does not leave possible wound, as from the edged manicure. The skin becomes soft and tender.

Such an apparatus is perfect for pedicure and cauldron removal.

It's not so difficult to start the hardware manicure of the house, it is enough to purchase the device itself and know several rules.

You need to know how to make a hardware manicure at home.

Rules for the implementation of the procedure:

First of all, in contrast to the edged manicure, the hardware is made exclusively on dry skin, so you do not need to grind in advance and soften the skin of the hands.
All nozzles should be carefully disinfected before each application.
You need to perform movements from the center to the edges, movements should be light and smooth. When processing the nail plate, it is impossible to linger in one place longer than on the other (in order to avoid irregularities). It is necessary to hold the device correctly, like a ball handle when writing, at an angle of 45 °.
It is not necessary to hurry and hard to handle all the marigolds at once, since the feature of the hardware manicure is that efforts are more accompanied than when manicure. Accordingly, quickly tired, and the car needs to be given to relax so that in the future you served longer.
This type of nail processing can be used no more than once every two weeks.

Back to the category

We often read feedback on the Internet that the manicure-pedicure electric set is absolutely useless. Many women bought it, used a couple of times and abandoned, as they just do not know how to use a manicure-pedicure set. At first glance, it really seems confusing and complex. But believe me everything is very simple, and you yourself can make sure this.

In this article I will try to tell about the domestic manicure-pedicure set of Maxwell. Many Vitek, Rowenta, Scarlett, Beurer, etc. have such manicure sets with special nozzles for nail processing, etc., the principle of their work is identical, the difference is only in the number of nozzles. Making a pedicure manicure at home with such devices is very simple and accessible to everyone, these devices are very easy to use and allow you to line and polish nails, improve the condition of the foot skin. In a word, such a set will noticeably simplify the care of their hands and legs, and with a small snarling, it saves time.

So take the usual manicure-pedicure set Maxwell (Vitek, Rowenta, Scarlett, etc.). Important to remember. That electric manicure sets are professional and household. For home manicure and pedicure, a household electric set with a number of revolutions is not more than 5000. Now we are considering the device for domestic use.

Includes a rechargeable machine for manicure with a charge indicator and 8 special nozzles that are attached to this typewriter.

Pay attention to the number of nozzles: they can be only 2, and maybe 11. In sets with a large number of nozzles, some nozzles are duplicated, but differ only in the degree of abrasiveness.

Some general rules for using a manicure-pedicure set:

1. I need to handle your nails with an electrical set without prior discharge. You can do this after the procedure itself. Perhaps, first, the use of such an appliance may seem uncomfortable, but then the case is only practice. Choose at first low speed and nozzles with a smaller abrasive.

2. Do not do hardware Manicure Pedicure On damaged areas, especially where there are open wounds, let them come first.

3. After use, process the nozzles with alcohol or cologne to displaced the surface, especially if it uses several people.

Nozzles (cutters) for hardware manicure with a description of the use of each nozzle at home:

1. - Used for grinding rough skin or mazole. It is necessary to neatly move this nozzle on the treated skin.

2. - Be careful and try so that the blade does not penetrate deep under the skin. Cuticulus treatment is produced from one edge of the nail to another and back.

3. - For nail processing on legs.

4. - To remove the fracturing areas of the skin and processing ingrown nails. This nozzle is used in the direction outside inside to the base of the nail.

5.- These discs are designed to feed the nails and give them the form. For the processing of thin nails, a disk with a shallow notch is used, and for thick nails, use a disk with a large notch.

6. Disc-nozzle for grinding and polishing nails - After manicure-pedicure, adds extra shine.

7. Disks-nozzles for removing flabber skin - With palms of hands (use less rough nozzles) or feet feet (use more rough).

So choose the necessary nozzle and insert it into the device and begin to carefully handle the nails. Remove the cuticle, nails cut and give them a form. This machine does not make a cut manicure that for me a big plus, as it does not always work well, especially trimmer. Here the cuticle is simply rushing and processed by a grinding cone (removable cells are removed).

At the end of the procedure, you can make a warm bath for hands and legs and treat them with moisturizing cream or lotion. If necessary, your nails can be covered with varnish.